MUR210RLG

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MUR210 Preferred Device SWITCHMODEt Power Rectifier SWITCHMODE power rectifiers are state−of−the−art devices that are designed for use in switching power supplies, inverters and as free wheeling diodes. http://onsemi.com Features • • • • • • ULTRAFAST RECTIFIERS 2 AMPERES, 100 VOLTS Ultrafast 20 Nanosecond Recovery Times 175°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb−Free Devices* Mechanical Characteristics • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable DO−41 PLASTIC AXIAL LEAD CASE 59 • Lead and Mounting Surface Temperature for Soldering Purposes: • 220°C Max for 10 Seconds, 1/16″ from Case Polarity: Cathode Indicated by Polarity Band MAXIMUM RATINGS Rating MARKING DIAGRAM Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 100 − V Average Rectified Forward Current (Square Wave Mounting Method #3) (Note 1) IF(AV) 2.0 @ TA = 100°C A Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 35 A TJ, Tstg −65 to +175 °C Operating Junction Temperature and Storage Temperature Range A MUR210 YYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION THERMAL CHARACTERISTICS Characteristic Maximum Thermal Resistance, Junction−to−Ambient Symbol Value Unit RqJA See Note 3 °C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 1 1 Package Shipping† MUR210 Axial Lead* 1000 Units/Bag MUR210G Axial Lead* 1000 Units/Bag Device MUR210RL Axial Lead* 5000/Tape & Reel MUR210RLG Axial Lead* 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MUR210/D MUR210 ELECTRICAL CHARACTERISTICS Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 A, TJ = 150°C) (IF = 2.0 A, TJ = 25°C) VF Maximum Instantaneous Reverse Current (Note 2) (Rated DC Voltage, TJ = 150°C) (Rated DC Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) trr Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) tfr Value Unit V 0.74 0.94 mA 50 2.0 ns 30 20 20 ns 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. 10 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 10 1 VF @ 175°C VF @ 25°C VF @ 100°C 0.1 0.3 0.5 0.7 0.9 1.1 1 0.1 0.3 1.3 VF @ 175°C VF @ 25°C VF @ 100°C 0.5 0.7 0.9 1.1 VF, INSTANTANEOUS VOLTAGE (VOLTS) VF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 2 1.3 MUR210 100.000 IR, REVERSE CURRENT (mA) IR, REVERSE CURRENT (mA) 1000 Ir @ 175°C Ir @ 100°C 10 Ir @ 25°C 1 0.1 1.000 Ir @ 100°C 0.100 Ir @ 25°C 0.010 0.001 0 25 50 75 100 PF(AV), AVERAGE POWER DISSIPATION (WATTS) TJ = 175°C Square Wave 1 0 100 50 150 200 100 2.5 TJ = 175°C 2.0 1.5 Square Wave dc 1.0 0.5 0.0 0.0 1.0 0.5 1.5 2.0 2.5 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT Figure 5. Current Derating Figure 6. Power Dissipation 50 3.0 50 TJ = 25°C TJ = 25°C 40 C, CAPACITANCE (pF) C, CAPACITANCE (pF) 75 Figure 4. Typical Reverse Current dc 30 20 10 0 50 Figure 3. Maximum Reverse Current 3 0 25 VR, REVERSE VOLTAGE (VOLTS) 4 2 0 VR, REVERSE VOLTAGE (VOLTS) 5 IF(AV), AVERAGE FORWARD Ir @ 175°C 10.000 100 0 10 20 30 40 40 30 20 10 0 50 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 7. Maximum Capacitance Figure 8. Typical Capacitance http://onsemi.com 3 50 MUR210 NOTE 3 − AMBIENT MOUNTING DATA Data shown for thermal resistance junction to ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 Units °C/W °C/W 50 °C/W 3 MOUNTING METHOD 1 ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ L L MOUNTING METHOD 2 ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L Vector Pin Mounting ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ MOUNTING METHOD 3 L = 3/8 ″ Board Ground Plane P.C. Board with 1−1/2 ″ X 1−1/2 ″ Copper Surface http://onsemi.com 4 MUR210 PACKAGE DIMENSIONS AXIAL LEAD CASE 59−10 ISSUE U NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. B K D DIM A B D F K F A POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 −−− 0.050 1.000 −−− MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 −−− 1.27 25.40 −−− F K SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 5 For additional information, please contact your local Sales Representative. MUR210/D