MUR3040PT

MUR3020PT, MUR3040PT, MUR3060PT SWITCHMODEt Power Rectifiers These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. Features http://onsemi.com • • • • • • • • • Ultrafast 35 and 60 Nanosecond Recovery Time 175°C Operating Junction Temperature High Voltage Capability to 600 V Low Forward Drop Low Leakage Specified @ 150°C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction Pb−Free Packages are Available* ULTRAFAST RECTIFIERS 30 AMPERES, 200−600 VOLTS 1 3 2 4 Mechanical Characteristics: MARKING DIAGRAM 4 • Case: Epoxy, Molded • Weight: 4.3 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads • • are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds Shipped 30 Units Per Plastic Tube 1 AYWWG MUR30x0PT 2 3 SOT−93 (TO−218) CASE 340D STYLE 2 A = Y = WW = G = MUR30x0PT = Assembly Location Year Work Week Pb−Free Package Device Code x = 2, 4, or 6 ORDERING INFORMATION Device MUR3020PT MUR3020PTG MUR3040PT MUR3040PTG MUR3060PT *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MUR3060PTG Package SOT−93 SOT−93 (Pb−Free) SOT−93 SOT−93 (Pb−Free) SOT−93 SOT−93 (Pb−Free) Shipping 30 Units/Rail 30 Units/Rail 30 Units/Rail 30 Units/Rail 30 Units/Rail 30 Units/Rail © Semiconductor Components Industries, LLC, 2008 October, 2008 − Rev. 9 1 Publication Order Number: MUR3020PT/D MUR3020PT, MUR3040PT, MUR3060PT MAXIMUM RATINGS (Per Leg) Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) Per Leg Per Device Symbol VRRM VRWM VR IF(AV) MUR3020PT 200 MUR3040PT 400 MUR3060PT 600 Unit V 15 @ TC = 150°C 30 @ TC = 150°C 30 @ TC = 150°C 200 − 65 to +175 15 @ TC = 145°C 30 @ TC = 145°C 30 @ TC =145°C A Peak Rectified Forward Current, Per Leg (Rated VR, Square Wave, 20 kHz) Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Per Leg Operating Junction and Storage Temperature IFRM IFSM TJ, Tstg A A °C THERMAL CHARACTERISTICS (Per Diode Leg) Maximum Thermal Resistance, − Junction−to−Case − Junction−to−Ambient RqJC RqJA VF 1.5 40 °C/W ELECTRICAL CHARACTERISTICS (Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1) (IF = 15 Amp, TC = 150°C) (IF = 15 Amp, TC = 25°C) Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 150°C) (Rated DC Voltage, TJ = 25°C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) V 0.85 1.05 500 10 35 60 1.12 1.25 1.2 1.5 1000 10 mA iR trr ns Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://onsemi.com 2 MUR3020PT, MUR3040PT, MUR3060PT MUR3020PT 100 TJ = 150°C 100 IR , REVERSE CURRENT ( μ A) 100°C 25°C 50 20 10 5 2 1 0.5 0.2 0.1 TJ = 150°C 100°C 50 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 25°C 10 0.05 0.02 0.01 5 3 2 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 16 14 12 10 0 20 40 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) 180 200 Figure 2. Typical Reverse Current (Per Leg) 1 dc 0.5 0.3 0.2 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 TC, CASE TEMPERATURE (5C) 180 0.1 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Current Derating, Case (Per Leg) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) P F(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 dc 12 10 8 6 4 SQUARE WAVE dc RqJA = 15°C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. 16 14 12 10 8 6 SQUARE WAVE 4 2 0 0 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 16 TJ = 125°C 20 I (RESISTIVE LOAD) PK = π IAV I (CAPACITIVE LOAD) PK = 5 IAV 10 dc SQUARE WAVE 2 RqJA = 40°C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (5C) 180 200 Figure 4. Current Derating, Ambient (Per Leg) Figure 5. Power Dissipation (Per Leg) http://onsemi.com 3 MUR3020PT, MUR3040PT, MUR3060PT MUR3040PT 100 IR , REVERSE CURRENT ( μ A) 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 TJ = 150°C 100°C 25°C 50 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 150°C 100°C 25°C 10 5 3 0 50 100 150 200 250 300 350 400 450 500 Figure 7. Typical Reverse Current (Per Leg) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 16 14 dc VR, REVERSE VOLTAGE (VOLTS) 2 1 12 10 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 TC, CASE TEMPERATURE (5C) 180 0.5 0.3 0.2 0.1 0.2 0.4 Figure 6. Typical Forward Voltage (Per Leg) 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 Figure 8. Current Derating, Case (Per Leg) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) P F(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 dc 12 10 8 6 4 SQUARE WAVE dc RqJA = 15°C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. 16 14 12 10 I (RESISTIVE-INDUCTIVE LOAD) PK = π IAV I (CAPACITIVE LOAD) PK = 5 IAV 10 dc 20 8 6 4 2 0 0 2 4 6 8 10 SQUARE WAVE SQUARE WAVE 2 RqJA = 40°C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 0 20 40 60 80 TJ = 125°C 100 120 140 160 180 200 12 14 16 TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg) http://onsemi.com 4 MUR3020PT, MUR3040PT, MUR3060PT MUR3060PT 100 200 100 50 IR , REVERSE CURRENT ( μ A) TJ = 150°C 30 100°C 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 25°C 10 20 10 5 2 1 0.5 0.2 0.1 0.05 5 3 2 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 16 14 12 SQUARE WAVE 10 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 180 dc 0.02 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) 550 600 650 TJ = 150°C 100°C 50 25°C Figure 12. Typical Reverse Current (Per Leg) 1 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 vF, INSTANTANEOUS VOLTAGE (VOLTS) TC, CASE TEMPERATURE (5C) Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) P F(AV) , AVERAGE POWER DISSIPATION (WATTS) 10 9 8 7 6 5 4 3 SQUARE WAVE RqJA = 60°C/W 1 AS OBTAINED IN FREE AIR 0 WITH NO HEAT SINK. 20 40 60 80 100 120 140 0 TA, AMBIENT TEMPERATURE (5C) 2 dc SQUARE WAVE dc RqJA = 16°C/W AS OBTAINED FROM A SMALL TO-220 HEAT SINK. 16 14 12 10 8 6 4 2 0 0 I (CAPACITIVE LOAD) PK = 5 IAV 10 dc 20 SQUARE WAVE (RESISTIVE-INDUCTIVE LOAD) IPK = π IAV TJ = 125°C 160 180 200 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 16 Figure 14. Current Derating, Ambient (Per Leg) Figure 15. Power Dissipation (Per Leg) http://onsemi.com 5 MUR3020PT, MUR3040PT, MUR3060PT r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 SINGLE PULSE P(pk) t1 t2 DUTY CYCLE, D = t1/t2 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) - TC = P(pk) ZqJC(t) 0.05 0.02 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 t, TIME (ms) 10 20 50 100 200 500 1K Figure 16. Thermal Response 1K 500 C, CAPACITANCE (pF) 200 100 50 20 10 TJ = 25°C 1 2 5 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 100 Figure 17. Typical Capacitance (Per Leg) http://onsemi.com 6 MUR3020PT, MUR3040PT, MUR3060PT PACKAGE DIMENSIONS SOT−93 (TO−218) CASE 340D−02 ISSUE E C B Q E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS MIN MAX --20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 5.40 5.55 2.00 3.00 0.50 0.78 31.00 REF --16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF ANODE 1 CATHODE(S) ANODE 2 CATHODE(S) INCHES MIN MAX --0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.213 0.219 0.079 0.118 0.020 0.031 1.220 REF --0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069 U S K L 1 2 4 A 3 D V G J H DIM A B C D E G H J K L Q S U V STYLE 2: PIN 1. 2. 3. 4. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 7 MUR3020PT/D