NCS6415DWR2G

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. NCS6415 Bus−Controlled Video Matrix Switch Description The main function of the NCS6415 is to switch 8 video input sources to the 6 outputs. Each output can be switched to only one of the inputs, whereas any single input may be connected to several outputs. All switching possibilities are controlled through the I2C bus. http://onsemi.com MARKING DIAGRAMS* 20 Features • Cascadable with another NCS6415 (Internal Address can be changed • • • • • • • • • by Pin 7 Voltage) 8 Inputs (CVBS, RGB, Chroma, ...) 6 Outputs with Low Impedance Driver Possibility of Chroma Signal for each Input by Switching off the Clamp with an External Resistor Bridge Bus Controlled 6.5 dB Gain between any Input and Output −45 dB Crosstalk at 5 MHz Compatible with TEA6415C Full ESD Protection These are Pb−Free Devices 20 NCS6415 AWLYYWWG 1 SO−20 WB DW SUFFIX CASE 751D A WL YY WW G 1 = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package *For additional marking information, refer to Application Note AND8002/D. 20 INPUT8 INPUT1 1 DATA1 2 19 GND INPUT2 3 18 OUTPUT6 CLOCK 4 17 OUTPUT5 INPUT3 5 16 OUTPUT4 INPUT4 6 15 OUTPUT3 PROG 7 14 OUTPUT2 INPUT5 8 13 OUTPUT1 12 GND VCC 9 11 INPUT7 INPUT6 10 ORDERING INFORMATION Package Shipping † NCS6415DWG SO−20 (Pb−Free) 38 Units / Rail NCS6415DWR2G SO−20 1000 / Tape & Reel (Pb−Free) Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev. 0 1 Publication Order Number: NCS6415/D NCS6415 OUTPUT6 OUTPUT4 OUTPUT2 OUTPUT5 OUTPUT3 OUTPUT1 GND 18 INPUT1 1 INPUT2 3 INPUT3 5 INPUT4 6 INPUT5 8 INPUT6 10 INPUT7 11 INPUT8 20 17 16 15 14 13 12 Bus Decoder 2 7 4 9 19 DATA PROG CLOCK VCC GND Figure 1. Block Diagram The main function of the NCS6415 is to switch 8 video input sources to the 6 outputs. Each output can be switched to only one of the inputs, whereas any single input may be connected to several outputs. The lowest level of each signal is aligned on each input (bottom of sync pulse for CVBS or Black Level for RGB signals). The nominal gain between any input and output is 6 dB. For Chroma signals, the alignment is switched off by forcing, with an external 5‘ VDC resistor bridge on the input. Each input can be used as a normal input or as a Chroma input (with external resistor bridge). All the switching possibilities are changed through the I2C bus. The switches configuration is defined by words of 16 bits: one word of 16 bits for each output channel. So, 6 words of 16 bits are necessary to determine the starting configuration upon power−on (power supply: 0 to 10 V). But a new configuration needs only the words of the changed output channels. Driving a 75 W load requires an external transistor. http://onsemi.com 2 NCS6415 Table 1. ATTRIBUTES Characteristics ESD Value Human Body Model Machine Model 4 kV 400 V Moisture Sensitivity (Note 1) Flammability Rating Level 3 Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in. 1. For additional information, see Application Note AND8003/D Table 2. MAXIMUM RATINGS Parameter Power Supply Voltage Symbol Rating Unit VCC 12 V Operating Temperature Range TA 0 to +70 °C Storage Temperature Range Tstg −60 to +150 °C Thermal Resistance, Junction−to−Air SO−20 °C/W qJA 30 to 35 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. DC & AC Characteristics (TA = 25°C, VCC = 10 V, RL = 10 kW, CL = 3 pF) Symbol Parameter Min Typ Max Unit VCC Supply Voltage 8 10 11 V ICC Power Supply Current (No Load) 20 30 40 mA 1.5 2 VPP 1 3 mA 3.6 3.9 V DC Level Shift (0°C to 70°C) 5 100 mV RIN Input Resistance 1 MW CIN Input Capacitance 2 pF Dynamic (VIN = 2.5 VPP) 5 VPP Output Impedance (Note 2) 25 50 W 7 dB INPUTS Signal Amplitude (CVBS signal) (Note 2) Input Current (per output connected, VIN = 5 VDC) DC Level 3.3 OUTPUTS AV Gain (Note 2) 6 6.5 BW Bandwidth (Note 2) −1 dB Attenuation −3 dB Attenuation 7 15 20 0.1 dB Gain Flatness (Note 2) 6 MHz Crosstalk f = 3.58 MHz f = 5 MHz DC Level I2C MHz −48 −45 dB 2.4 2.75 3.1 V 1.5 2 3 V BUS INPUT: DATA, CLOCK AND PROG Threshold Voltage 2. Guaranteed by design and/or characterization. http://onsemi.com 3 NCS6415 Table 4. I2C Bus Characteristics Symbol Parameter Test Conditions Min Max Unit SCL VIL Low Level Input Voltage −0.3 +1.5 V VIH High Level Input Voltage 3.0 VCC +0.5 V ILI Input Leakage Current −10 +10 mA fSCL Clock Frequency (Note 3) 0 100 kHz tR Input Rise Time (Note 3) 1.5 V to 3 V 1000 ns tF Input Fall Time (Note 3) 3 V to 1.5 V 300 ns CI Input Capacitance (Note 3) 10 pF VI = 0 to VCC SDA VIL Low Level Input Voltage −0.3 +1.5 V VIH High Level Input Voltage 3.0 VCC +0.5 V ILI Input Leakage Current −10 +10 mA CI Input Capacitance (Note 3) 10 pF tR Input Rise Time (Note 3) 1.5 V to 3 V 1000 ns tF Input Fall Time (Note 3) 3 V to 1.5 V 300 ns VOL Low Level Output Voltage IOL = 3 mA 0.4 V tF Output Fall Time (Note 3) 3V to 1.5 V 250 ns CL Load Capacitance 400 pF VI = 0 to VCC TIMING tLOW Clock Low Period (Note 4) 4.7 ms tHIGH Clock High Period (Note 4) 4.0 ms tSU,DAT Data Setup Time (Note 4) 250 ns tHD,DAT Data Hold Time (Note 4) 0 tSU,STO Setup Time from Clock High to Stop (Note 4) 4.0 ms tBUF Start Setup Time following a Stop (Note 4) 4.7 ms tHD,STA Start Hold Time (Note 4) 4.0 ms tSU,STA Start Setup Time following Clock Low to High Transition (Note 4) 4.7 ms 3. Guaranteed by design and/or characterization. 4. Functionality guaranteed by design and/or characterization. http://onsemi.com 4 340 ns NCS6415 I2C Bus Selections The I2C chip address is defined by the first byte. The second byte defines the input/output configuration. Table 5. CHIP ADDRESS BYTE (1ST BYTE OF TRANSMISSION) HEX BINARY 86 1000 0110 When PROG pin is connected to Ground 0000 0110 When PROG pin is connected to VCC 06 Input/Output Selection Byte (2nd Comment byte of transmission) Table 6. I2C BUS OUTPUT SELECTIONS Output Address (MSB) Input Address (LSB) 00000 XXX Pin 18 Selected Output 00100 XXX Pin 14 00010 XXX Pin 16 00110 − Not Used 00001 XXX Pin 17 00101 XXX Pin 13 00011 XXX Pin 15 00111 − Not Used Output is selected by the 5 MSBs. Table 7. I2C BUS INPUT SELECTIONS Output Address (MSB) Input Address (LSB) Selected Input 00XXX 000 Pin 5 00XXX 100 Pin 8 00XXX 010 Pin 3 00XXX 110 Pin 20 00XXX 001 Pin 6 00XXX 101 Pin 10 00XXX 011 Pin 1 00XXX 111 Pin 11 Input is selected by the 3 LSBs. Example: 0010 0101 (Binary) or 25 (Hex) connects Pin 10 (input) to Pin 14 (output) SDA tBUF tSU.DAT tLOW SCL tR tHD.STA tHD.DAT tHIGH SDA tSU.STA Figure 2. I2C Timing Diagram http://onsemi.com 5 tF tSU.STO NCS6415 VCC VCC 14 kW x3 7 kW 0.36 VCC 8 NPN Transistors Pins 1, 3, 5, 6, 8, 10, 11 and 20 Pins 1, 3, 5, 6, 8, 10, 11 and 20 11 kW Output 6 Times Figure 3. Input Configuration Figure 4. Output Configuration Pins 2, 4, and 7 VREF 250 mA VCC To I2L Part 20 kW * 150 W 20 kW ACK 150 W *For Pin 2 (Data Only) Figure 5. Bus I/O Configuration http://onsemi.com 6 Figure 6. VCC Pin Configuration NCS6415 USING A SECOND NCS6415 The programming input pin (PROG) allows two NCS6415 circuits to operate in parallel and to select them independently through the I2C bus by modifying the address byte. Consequently, the switching capabilities are doubled, or IC1 and IC2 can be cascaded (see Figure 7). NCS6415 PROG Logical “0” IC1 MCU Video Inputs Video Outputs NCS6415 PROG Logical “1” IC2 Video Inputs Video Outputs Figure 7. Cascaded NCS6415 TYPICAL APPLICATION DIAGRAM NCS6415 is suited for single supply system, running on broadcast studio quality signals. The layout is not as critical a single +10 V supply. The high quality of the output stage to the design and it can be easily realized on a single sided and excellent linearity provides video signal comparable to board. Additional Video Inputs S TV receiver circuit Outpu 1 1 Input 1 3 5 6 8 10 11 20 Input 8 Additional Video Outputs Clock Prog Data Bus Decoder HDTV Receiver circuit Screen VCR NCS6415 Security Video Interface Output 6 18 17 16 15 14 13 VCC Microcontroller Figure 8. Typical Application Diagram http://onsemi.com 7 8 http://onsemi.com Figure 9. Typical Application Circuit VCC = +10V Input 6 Input 5 Input 4 Input 3 SCL Input 2 SDA Input 1 75W R9 75W R8 75W R5 75W R3 75W R1 C10 10mF R6 75W R2 R4 C5 100nF C8 100nF C6 100nF 100nF 100W C3 100nF 100W C2 100nF C1 C9 100nF 10 9 8 7 6 5 4 3 2 1 INPUT6 VCC INPUT5 PROG INPUT4 INPUT3 CLOCK INPUT2 DATA INPUT1 INPUT7 GND OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4 OUTPUT5 OUTPUT6 GND INPUT8 11 12 13 14 15 16 17 18 19 20 C11 100nF C12 100nF R11 75W 75W R42 Input 7 R13 10kW Input 8 R12 470W R14 10kW R16 68W +10V R32 10kW R37 10kW R38 470W +10V R27 10kW R33 470W R39 10kW R40 75W R41 68W R15 75W R17 10kW 470W R21 R18 68W +10V R19 10kW R20 75W R22 10kW R23 470W R28 470W R35 10kW R36 68W R35 75W +10V R24 10kW R25 75W R26 68W +10V R30 10kW R30 75W R31 68W +10V Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 NCS6415 NCS6415 PACKAGE DIMENSIONS SO−20 WB CASE 751D−05 ISSUE G q A 20 X 45 _ h H M E 0.25 10X NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF B DIMENSION AT MAXIMUM MATERIAL CONDITION. 11 B M D 1 10 20X B B 0.25 M T A S B S L A 18X e A1 SEATING PLANE C T DIM A A1 B C D E e H h L q MILLIMETERS MIN MAX 2.35 2.65 0.10 0.25 0.35 0.49 0.23 0.32 12.65 12.95 7.40 7.60 1.27 BSC 10.05 10.55 0.25 0.75 0.50 0.90 0_ 7_ ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 9 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NCS6415/D