NCV51511SYNCBUCKGEVB

NCV51511SYNCBUCKGEVB: NCV51511 EVAL BRD The Evaluation board is developed to evaluate performance of high side and low side gate driver and the target application is 300W non-isolation Synchonous Buck 48 V ±10% input voltage and 28 V regulated output voltage. To supply bias voltage both synchronous buck and NCV51511, the NCV33163 control the auxiliary power output around 10 V. And the main synchronous buck controller generate high side and low side PWM input signal for NCV51511.The NCV51511 drive the high side and low side external MOSFET depend on the input PWM signal and VDD level. Technical Documents Type Document Title Document ID/Size Rev Eval NCV51511SYNCBUCKGEVB_BOM_ROHS.REV0.PDF Boards NCV51511SYNCBUCKGEVB_BOM_ROHS.rev0 46 KB Eval NCV51511SYNCBUCKGEVB_GERBER.REV0.ZIP Boards NCV51511SYNCBUCKGEVB_GERBER.rev0 - 125 0 KB Eval NCV51511SYNCBUCKGEVB_SCHEMATIC.REV0.PDF Boards NCV51511SYNCBUCKGEVB_SCHEMATIC.rev0 68 KB 0 0 Eval NCV51511SYNCBUCKGEVB_TEST_PROCEDURE.REV0.PD NCV51511SYNCBUCKGEVB_TEST_PROCEDURE. 0 Boards F rev0 - 109 KB https://www.onsemi.com/support/evaluation-board/ncv51511syncbuckgevb/7-31-19