NRVUS1MFA

DATA SHEET www.onsemi.com Super Fast Surface Mount Rectifiers US1AFA-US1MFA 2 1 SOD−123FL CASE 425AB Features • • • • • • • • Glass Passivated Chip Junction Low Power Loss, High Efficiency Fast Switching Reverse Recovery Time: 50~75 ns Maximum High Surge Capacity UL Flammability 94V−0 Classification MSL 1 per J−STD−020 NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free and are RoHS Compliant 1 Cathode 2 Anode MARKING DIAGRAM YYYY ZXXXW YYYY Z XXX W = Binary Calendar Year Code Scheme = Assembly Plant Code = Specific Device Code = Single Digit Week Code ORDERING INFORMATION Part Number Device Code Marking Package Shipping† US1AFA, NRVUS1AFA* HAL SOD−123FL (Pb−Free / Halogen Free) 3,000 / Tape & Reel US1BFA, NRVUS1BFA* HBL US1DFA, NRVUS1DFA* HDL US1FFA, NRVUS1FFA* HFL US1GFA, NRVUS1GFA* HGL US1JFA, NRVUS1JFA* HJL US1KFA, NRVUS1KFA* HKL US1MFA, NRVUS1MFA* HML †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable © Semiconductor Components Industries, LLC, 2015 February, 2022 − Rev. 4 1 Publication Order Number: US1MFA/D US1AFA−US1MFA ABSOLUTE MAXIMUM RATINGS (Values are at TA = 25°C unless otherwise noted) Parameter Symbol US1 AFA US1 BFA US1 DFA US1 FFA US1 GFA US1 JFA US1 KFA US1 MFA Unit 100 200 300 400 600 800 1000 V VRRM Repetitive Peak Reverse Voltage 50 VRMS RMS Reverse Voltage 35 70 140 210 280 420 560 700 V DC Blocking Voltage 50 100 200 300 400 600 800 1000 V VR IF(AV) Average Forward Rectified Current 1 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 30 A Operating Junction Temperature Range −55 to +150 °C Storage Temperature Range −55 to +150 °C TJ TSTG Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted) Parameter Symbol Value Unit YJL Typical Thermal Resistance, Junction to Lead 21 °C/W RθJA Typical Thermal Resistance, Junction to Ambient 153 °C/W NOTE: Device mounted at minimum pad. ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted) Symbol Parameter Conditions US1 AFA US1 BFA US1 DFA US1 FFA US1 GFA 0.95 1.30 US1 JFA US1 KFA 1.70 US1 MFA Unit VF Maximum Instantaneous Forward IF = 1 A Voltage (Note 1) IR Maximum Reverse Current at Rated VR TJ = 25°C CJ Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 20 15 pF Trr Maximum Reverse Recovery Time IF = 0.5 A, IR = 1 A, Irr = 0.25 A 50 75 ns 5 TJ = 125°C V mA 150 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse test with PW = 300 ms, 1% duty cycle. www.onsemi.com 2 US1AFA−US1MFA AVERAGE FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT ( A) TYPICAL PERFORMANCE CHARACTERISTICS Figure 2. Typical Reverse Characteristics INSTANTANEOUS FORWARD CURRENT (A) Figure 1. Maximum Forward Current Derating Voltage PEAK FORWARD SURGE CURRENT (A) TJ=25 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) LEAD TEMPERATURE ( oC) 8.3 ms Single Half Sine Wave US1AFA−US1DFA US1GFA US1JFA−US1MFA FORWARD VOLTAGE (V) NUMBER OF CYCLES AT 60 Hz Figure 3. Maximum Non−Repetitive Forward Surge Current JUNCTION CAPACITANCE (pF) TJ=125 Figure 4. Typical Instantaneous Forward Characteristics US1AFA−US1GFA US1JFA−US1MFA REVERSE VOLTAGE (V) Figure 5. Typical Junction Capacitance Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD−123FA CASE 425AB ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON13722G SOD−123FA DATE 11 AUG 2022 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative