NVMFD5483NL
MOSFET – Power, Dual
N-Channel
60 V, 36 mW, 24 A
Features
•
•
•
•
•
•
•
Small Footprint (5x6 mm) for Compact Designs
Low RDS(on) to Minimize Conduction Losses
Low Capacitance to Minimize Driver Losses
175°C Operating Temperature
NVMFD5483NLWF − Wettable Flank Option for Enhanced Optical
Inspection
AEC−Q101 Qualified and PPAP Capable
This is a Pb−Free Device
www.onsemi.com
V(BR)DSS
RDS(on) MAX
ID MAX
36 m @ 10 V
60 V
24 A
45 m @ 4.5 V
Dual N−Channel
D2
D1
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
60
V
Gate−to−Source Voltage
VGS
"20
V
ID
24
A
Parameter
Continuous Drain
Current RJC
(Notes 1, 2, 4)
TC = 25°C
Power Dissipation
RJC (Notes 1, 2)
Continuous Drain
Current RJA
(Notes 1, 3 & 4)
Steady
State
TC = 100°C
TC = 25°C
Power Dissipation
RJA (Notes 1 & 3)
Pulsed Drain Current
PD
Steady
State
TA = 25°C, tp = 10 s
Source Current (Body Diode)
Single Pulse Drain−to−Source Avalanche
Energy (TJ = 25°C, VGS = 10 V, IL(pk) = 28 A,
L = 0.1 mH)
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
A
6.4
4.5
PD
153
A
−55 to
175
°C
IS
39
A
EAS
39
mJ
TL
260
°C
ORDERING INFORMATION
Value
Unit
Junction−to−Case − Steady State (Note 2)
RJC
3.4
°C/W
Junction−to−Ambient − Steady State (Note 3)
RJA
49
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted to an ideal (infinite) heat sink.
3. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
4. Maximum current for pulses as long as 1 second are higher but are dependent
on pulse duration and duty cycle.
1
D1
D1
D2
D2
D2 D2
IDM
Symbol
July, 2019 − Rev. 3
XXXXXX
AYWZZ
TJ, Tstg
1.5
THERMAL RESISTANCE MAXIMUM RATINGS (Note 1)
© Semiconductor Components Industries, LLC, 2015
D1 D1
S1
G1
S2
G2
XXXXXX = 5483NL
XXXXXX = (NVMFD5483NL) or
XXXXXX = 5483LW
XXXXXX = (NVMFD5483NLWF)
A
= Assembly Location
Y
= Year
W
= Work Week
ZZ
= Lot Traceability
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
Parameter
DFN8 5x6
(SO8FL)
CASE 506BT
W
3.1
TA = 100°C
Operating Junction and Storage Temperature
1
22.1
TA = 100°C
TA = 25°C
MARKING DIAGRAM
W
44.1
ID
S2
S1
17
TC = 100°C
TA = 25°C
G2
G1
Package
Shipping†
NVMFD5483NLT1G
DFN8
(Pb−Free)
1500/
Tape & Reel
NVMFD5483NLT3G
DFN8
(Pb−Free)
5000/
Tape & Reel
NVMFD5483NLWFT1G
DFN8
(Pb−Free)
1500/
Tape & Reel
NVMFD5483NLWFT3G
DFN8
(Pb−Free)
5000/
Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
NVMFD5483NL/D
NVMFD5483NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 A
60
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Reference to 25°C
ID = 250 A
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
VGS = 0 V,
VDS = 60 V
V
63
mV/°C
TJ = 25°C
1.0
TJ = 125°C
10
IGSS
VDS = 0 V, VGS = ±20 V
±100
A
nA
ON CHARACTERISTICS (Note 5)
Gate Threshold Voltage
Gate Threshold Voltage Temperature
Coefficient
Drain−to−Source On Resistance
VGS(TH)
VGS = VDS, ID = 250 A
VGS(TH)/TJ
Reference to 25°C
ID = 250 A
1.5
−5.2
2.5
RDS(on)
VGS = 10 V, ID = 15 A
29
36
VGS = 4.5 V, ID = 15 A
36
45
V
mV/°C
m
CHARGES AND CAPACITANCES
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
67
Total Gate Charge
QG(TOT)
23.4
Threshold Gate Charge
QG(TH)
0.65
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
Total Gate Charge
QG(TOT)
668
VGS = 0 V, f = 1.0 MHz, VDS = 25 V
VGS = 10 V, VDS = 48 V,
ID = 10 A
pF
152
nC
2.14
9.16
VGS = 4.5 V, VDS = 48 V, ID = 10 A
13.2
nC
6.8
ns
SWITCHING CHARACTERISTICS (Note 6)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
td(on)
tr
td(off)
VGS = 4.5 V, VDS = 48 V,
ID = 5.0 A, RG = 2.5
tf
10.3
37.5
23.5
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.87
TJ = 125°C
0.82
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 10 A
30
VGS = 0 V, dIS/dt = 100 A/s,
IS = 10 A
QRR
www.onsemi.com
2
V
ns
23.3
6.7
35
5. Pulse Test: pulse width = 300 s, duty cycle v 2%.
6. Switching characteristics are independent of operating junction temperatures.
1.2
nC
NVMFD5483NL
TYPICAL CHARACTERISTICS
25
3.9 V
VDS = 5 V
3.5 V
15
3.3 V
10
3.1 V
ID, DRAIN CURRENT (A)
3.7 V
2.9 V
5
2.7 V
0
1
2
3
4
5
6
7
8
9
10
TJ = 25°C
5
TJ = 125°C
1.0
2.0
1.5
TJ = −55°C
3.0
2.5
4.0
3.5
4.5
Figure 2. Transfer Characteristics
ID = 10 A
TJ = 25°C
0.05
0.04
0.03
2.0
1.8
10
Figure 1. On−Region Characteristics
0.06
2.4
2.2
15
VGS, GATE−TO−SOURCE VOLTAGE (V)
0.07
2
20
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0.08
0.02
25
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (m)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (m)
30
VGS = 10 to 4.5 V
20
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
4.1 V
3
4
5
6
7
8
9
10
5.0
0.06
TJ = 25°C
0.05
VGS = 4.5 V
0.04
VGS = 10 V
0.03
0.02
0.01
2
6
10
14
18
22
30
26
VGS, GATE−TO−SOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. VGS
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
1.0E−04
ID = 10 A
VGS = 15 V
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
−50 −25
TJ = 150°C
1.0E−05
IDSS, LEAKAGE (A)
ID, DRAIN CURRENT (A)
30
1.0E−06
TJ = 125°C
1.0E−07
1.0E−08
1.0E−09
1.0E−10
TJ = 25°C
1.0E−11
0
25
50
75
100
125
150
1.0E−12
175
5
10
15
20
25
30
35
40
45
50
55 60
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
3
NVMFD5483NL
TYPICAL CHARACTERISTICS
800
Ciss
700
600
500
400
300
Coss
200
Crss
0
1000
10
20
30
40
50
60
8
TJ = 25°C
6
4
Qgs
Qgd
VDD = 48 V
ID = 10 A
2
0
0
2
4
6
8
10
12
14 16
18
20 22 24
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
10
9
100
td(off)
tf
1
QT
10
Qg, TOTAL GATE CHARGE (nC)
VDD = 48 V
VGS = 4.5 V
ID = 5 A
10
12
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
IS, SOURCE CURRENT (A)
100
0
t, TIME (ns)
TJ = 25°C
VGS = 0 V
tr
td(on)
1
10
7
6
5
4
3
2
1
0
100
TJ = 25°C
VGS = 0 V
8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
RG, GATE RESISTANCE ()
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
ID, DRAIN CURRENT (A)
C, CAPACITANCE (pF)
900
VGS, GATE−TO−SOURCE VOLTAGE (V)
1000
100
TC = 25°C
VGS = 10 V
Single Pulse
10 s
100 s
1 ms
10 ms
10
dc
1
RDS(on) Limit
Thermal Limit
Package Limit
0.1
0.01
0.1
1
10
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
www.onsemi.com
4
100
NVMFD5483NL
TYPICAL CHARACTERISTICS
100
50% Duty Cycle
R(t) (°C/W)
10
1
20%
10%
5%
2%
1%
0.1
0.01
0.001
Single Pulse
0.000001
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
Figure 12. Thermal Response
www.onsemi.com
5
1
10
100
1000
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
DFN8 5x6, 1.27P Dual Flag (SO8FL−Dual)
CASE 506BT
ISSUE F
1
2X
SCALE 2:1
0.20 C
D
A
B
D1
8
7
6
ÉÉ
ÉÉ
ÉÉ
PIN ONE
IDENTIFIER
NOTE 7
1
2
2X
0.20 C
5
DATE 23 NOV 2021
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED
BETWEEN 0.15 AND 0.30 MM FROM THE TERMINAL TIP.
4. PROFILE TOLERANCE APPLIES TO THE EXPOSED PAD AS WELL
AS THE TERMINALS.
5. DIMENSIONS D1 AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
6. SEATING PLANE IS DEFINED BY THE TERMINALS. A1 IS DEFINED
AS THE DISTANCE FROM THE SEATING PLANE TO THE LOWEST
POINT ON THE PACKAGE BODY.
7. A VISUAL INDICATOR FOR PIN 1 MUST BE LOCATED IN THIS AREA.
E1 E
4X
h
3
4
c
TOP VIEW
A1
0.10 C
A
DETAIL B
0.10 C
NOTE 4
C
SIDE VIEW
DETAIL A
D2
D3
4X
e
1
SEATING
PLANE
NOTE 6
ALTERNATE
CONSTRUCTION
DETAIL A
L
K
4
DIM
A
A1
b
b1
c
D
D1
D2
D3
E
E1
E2
e
G
h
K
K1
L
M
N
MILLIMETERS
NOM
MIN
MAX
−−−
0.90
1.10
−−−
−−−
0.05
0.33
0.42
0.51
0.33
0.42
0.51
0.20
−−−
0.33
5.15 BSC
4.70
4.90
5.10
3.90
4.10
4.30
1.50
1.70
1.90
6.15 BSC
5.70
5.90
6.10
3.90
4.15
4.40
1.27 BSC
0.45
0.55
0.65
−−−
−−−
12 _
0.51
−−−
−−−
0.56
−−−
−−−
0.48
0.61
0.71
3.25
3.50
3.75
1.80
2.00
2.20
SOLDERING FOOTPRINT*
DETAIL B
4.56
M
4X
b1
N
4X
8
G
5
8X
2X
2X
2.08
8X
E2
0.75
0.56
b
K1
BOTTOM VIEW
0.10
C A B
0.05
C
GENERIC
MARKING DIAGRAM*
1
XXXXXX
AYWZZ
NOTE 3
4.84
4X
6.59
3.70
0.70
4X
XXXXXX = Specific Device Code
A
= Assembly Location
Y
= Year
W
= Work Week
ZZ
= Lot Traceability
1.40
2.30
1.00
1.27
PITCH
5.55
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON50417E
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DFN8 5X6, 1.27P DUAL FLAG (SO8FL−DUAL)
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative