P2P2305NZG-08SR

P2P2305NZ 3.3V 1:5 Clock Buffer Features • One-Input to Five-Output Buffer/Driver Functional Description • Buffers all frequencies from DC to 133.33MHz P2P2305NZ is a low-cost high-speed buffer designed to accept one clock input and distribute up to five clocks in mobile PC systems and desktop PC systems. The device operates at 3.3V and outputs can run up to 133.33MHz. • Low power consumption for mobile applications Less than 32mA at 66.6MHz with unloaded outputs • Input-Output delay: 6nS(max) • Output-output skew less than 250pS • 8-pin SOIC Package • Supply Voltage: 3.3V ± 0.3V P2P2305NZ is designed for low EMI and power optimization and consumes less than 32mA at 66.6MHz, making it ideal for the low-power requirements of mobile systems. It is available in an 8-pin SOIC Package. Block Diagram BUF_IN OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4 OUTPUT5 ©2010 SCILLC. All rights reserved. NOVEMBER 2010 – Rev. 2.1 Publication Order Number: P2P2305NZ/D P2P2305NZ Pin Configuration BUF-IN 1 Pin Description Pin# 8 OUTPUT5 7 OUTPUT4 OUTPUT1 2 OUTPUT2 3 6 VDD GND 4 5 OUTPUT3 Pin Name 6 VDD 4 GND 1 BUF_IN 2, 3, 5, 7, 8 OUTPUT [1:5] P2P2305NZ Description 3.3V Digital Voltage Supply Ground Input Clock Outputs Absolute Maximum Ratings Parameter Min Max Unit Supply Voltage to Ground Potential -0.5 +4.6 V DC Input Voltage (Except REF) -0.5 VDD + 0.5 V DC Input Voltage (REF) -0.5 7 V Storage Temperature -65 +150 °C Max. Soldering Temperature (10 sec) 260 °C Junction Temperature 150 °C 2000 V Static Discharge Voltage (As per JEDEC STD22- A114-B) Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device reliability. P2P2305NZ Operating Conditions Parameter Description Min Max Unit VDD Supply Voltage 3.0 3.6 V TA Operating temperature -40 85 °C Load Capacitance, Fout < 100MHz 30 pF Load Capacitance,100MHz < Fout < 133.33MHz 15 pF Input Capacitance 7 pF CL CIN BUF_IN, OUTPUT [1:5] tPU Operating Frequency DC 133.33 MHz Power-up time for all VDD’s to reach minimum specified voltage (power ramps must be monotonic) 0.05 50 mS Min Max Unit 0.8 V Electrical Characteristics Symbol VIL Test Conditions 1 VIH Input HIGH Voltage IIL Input LOW Current IIH Input HIGH Current VOL Notes: Parameter Input LOW Voltage 1 Output LOW Voltage 2.2 2 VOH Output HIGH Voltage IDD Supply Current VIN = 0V 50.0 µA VIN = VDD 100.0 µA 0.4 V IOL = 12mA 2 IOH = -12mA 0°C to +70°C -40°C to +85°C V 2.4 V 30 Unloaded outputs at 66.66MHz 32 mA 1. BUF_IN input has a threshold voltage of VDD/2. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. 1 Switching Characteristics Symbol Parameter Notes: Test Conditions 2 Min Typ Max Unit t3 Rise Time Measured between 0.8V and 2.0V 1.5 2 nS t4 Fall Time 2 1.5 2 nS tD Duty Cycle = t2 ÷ t1 Measured between 2.0V and 0.8V Measured at 1.4V (For an Input Clock Duty Cycle 50%) 50 55 % t5 Output to Output Skew All outputs equally loaded ±250 pS t6 Propagation Delay, BUF_IN Rising Edge to 2 OUTPUT Rising Edge Measured at VDD/2 6 nS 2 2 1. All parameters specified with loaded outputs. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. 45 4 P2P2305NZ Switching Waveforms Duty Cycle Timing t1 t2 1.4V 1.4V 1.4V OUTPUT All Outputs Rise/Fall Time 2V 2V 0.8V 0.8V OUTPUT t3 t4 Output-Output Skew 1.4V OUTPUT 1.4V OUTPUT t5 Input-Output Propagation Delay VDD/2 INPUT VDD/2 OUTPUT Test Circuit +3.3V VDD BUF-IN 0.1uF P2P2305NZ GND OUTPUT CL P2P2305NZ Package Information 8-lead (150-mil) SOIC Package H E D A2 A θ C D e A1 L B Dimensions Symbol Inches Min Max Millimeters Min Max A1 0.004 0.010 0.10 0.25 A 0.053 0.069 1.35 1.75 A2 0.049 0.059 1.25 1.50 B 0.012 0.020 0.31 0.51 C 0.007 0.010 0.18 0.25 D 0.193 BSC 4.90 BSC E 0.154 BSC 3.91 BSC e 0.050 BSC 1.27 BSC H 0.236 BSC 6.00 BSC L 0.016 0.050 θ 0° 8° 0.41 1.27 0° 8° P2P2305NZ Ordering Code Part Number Marking P2P2305NZG-08SR ADA 08-pin 150-mil SOIC, Tape and Reel, Pb Free P2I2305NZG-08ST ADB 08-pin 150-mil SOIC, Tube, Pb Free -40°C to +85°C P2I2305NZG-08SR ADB 08-pin 150-mil SOIC, Tape and Reel, Pb Free -40°C to +85°C Package Type Temperature 0°C to +70°C A “microdot” placed at the end of last row of marking or just below the last row toward the center of package indicates Pb-free. are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes ON Semiconductor and without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. U.S Patent Pending; Timing-Safe and Active Bead are trademarks of PulseCore Semiconductor, a wholly owned subsidiary of ON Semiconductor. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative