HL7851G

HL7851G GaAlAs Laser Diode Description The HL7851G is a high-power 0.78 µm band GaAlAs laser diode with a multi-quantum well (MQW) structure. It is suitable as a light source for optical disk memories, levelers and various other types of optical equipment. Hermetic sealing of the package assures high reliability. ODE-208-062A (Z) Rev.1 Dec. 04, 2006 Features • • • • Visible light output: λp = 785 nm Typ Small beam ellipticity: 9.5:23 High output power: 50 mW (CW) Built-in monitor photodiode Package Type • HL7851G: G2 Internal Circuit 1 3 PD LD 2 Absolute Maximum Ratings (TC = 25°C) Item Optical output power Pulse optical output power LD reverse voltage PD reverse voltage Operating temperature Symbol PO PO(pulse) VR(LD) VR(PD) Topr Ratings 50 60 * 2 30 –10 to +60 –40 to +85 Unit mW mW V V °C °C Storage temperature Tstg Note: Maximum 50% duty cycle, maximum 1 µs pulse width. Optical and Electrical Characteristics (TC = 25°C) Item Threshold current Slope efficiency LD Operating current LD Operating voltage Lasing wavelength Beam divergence (parallel) Beam divergence (perpendicular) Monitor current Astigmatism Symbol Ith ηs IOP VOP λp θ// θ⊥ IS AS Min — 0.35 — — 775 8 18 30 — Typ 45 0.55 135 2.3 785 9.5 23 45 5 Max 70 0.7 165 2.7 795 12 28 150 — Unit mA mW/mA mA V nm ° ° µA µm Test Conditions 40 (mW) / (I(45mW) – I(5mW)) PO = 50 mW PO = 50 mW PO = 50 mW PO = 50 mW, FWHM PO = 50 mW, FWHM PO = 5 mW, VR(PD) = 5 V PO = 5 mW, NA = 0.4 Rev.1 Dec. 04, 2006 page 1 of 4 HL7851G Typical Characteristic Curves Optical Output Power vs. Forward Current 60 Threshold Current vs. Case Temperature 100 Optical output power, PO (mW) 50 40 30 20 10 0 60°C Threshold current, Ith (mA) 200 TC = 0°C 25°C 50 30 20 0 40 80 120 160 10 0 10 20 30 40 50 60 Forward current, IF (mA) Case temperature, TC (°C) Slope Efficiency vs. Case Temperature 1.0 100 Monitor Current vs. Case Temprature PO = 5 m W VR(PD) = 5 V Slope efficiency, ηs (mW/mA) Monitor current, IS (µA) 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 Case temperature, TC (°C) 80 60 40 20 0 0 10 20 30 40 50 60 Case temperature, TC (°C) Lasing Wavelength vs. Case Temperature 800 PO = 50 mW 795 790 1.0 Far Field Pattern PO = 50 mW 0.8 TC = 25°C 0.6 0.4 0.2 0 -40 -30 -20 -10 0 10 20 40 50 30 Case temperature, TC (°C) 60 0 10 20 30 40 Parallel Perpendicular Lasing wavelength, λp (nm) 785 780 775 Relative intensity Angle, θ ( ° ) Rev.1 Dec. 04, 2006 page 2 of 4 HL7851G Package Dimensions Unit: mm φ 9.0 +0 –0.025 1.0 ± 0.1 (0.65) (90°) 3.5 ± 0.2 0.3 Glass φ 7.2 +0.3 –0.2 φ 6.2 ± 0.2 (φ2.0) Emitting Point 0.4 +0.1 –0 3 – φ 0.45 ± 0.1 1 2 3 1 3 2 φ 2.54 ± 0.35 OPJ Code JEDEC JEITA Mass (reference value) 1.5 ± 0.1 9±1 2.45 LD/G2 — — 1.1 g Rev.1 Dec. 04, 2006 page 3 of 4 HL7851G Cautions 1. Opnext Japan,Inc.(OPJ) neither warrants nor grants licenses of any our rights or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. OPJ bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. OPJ makes every attempt to ensure that its products are of high quality and reliability. However, contact our sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by OPJ particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. OPJ bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating OPJ product does not cause bodily injury, fire or other consequential damage due to operation of the OPJ product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from OPJ. 7. Contact our sales office for any questions regarding this document or OPJ products. 1. The laser light is harmful to human body especially to eye no matter what directly or indirectly. The laser beam shall be observed or adjusted through infrared camera or equivalent. 2. This product contains gallium arsenide (GaAs), which may seriously endanger your health even at very low doses. Please avoid treatment which may create GaAs powder or gas, such as disassembly or performing chemical experiments, when you handle the product. When disposing of the product, please follow the laws of your country and separate it from other waste such as industrial waste and household garbage. 3. Definition of items shown in this CAS is in accordance with that shown in Opto Device Databook issued by OPJ unless otherwise specified. Sales Offices Device Business Unit Opnext Japan, Inc. Takagi Bldg., 3F, 1-3-9, Iwamoto-cho, Chiyoda-ku, Tokyo 101-0032 Japan Tel: (03) 3865-5591 For the detail of Opnext, Inc., see the following homepage: Japan (Japanese) Other area (English) http://www.opnext.com/jp/products/ http://www.opnext.com/products/ ©2007 Opnext Japan, Inc., All rights reserved. Printed in Japan. Colophon 2.0 Rev.1 Dec. 04, 2006 page 4 of 4