OTS-4V8A

Optiva Standard, 4 Composite Video and 8 Audio ® OTS-4V8A Composite Video and Audio Transmission The OTS-4V8A provides for the digital transmission of 4 Channels of Composite Video and 8 Channels of Analog Audio. ST, LC, SC or FC ST, LC, SC or FC Composite Video Out Composite Video Out Video System Design Composite Video In Audio All units come in an insert card version. Composite Video In The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card 8 Analog Racks (OT-DTCR Series). Audio In The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva Upgrade Path ® S T A T U S A L E R T S T A T U S A L E R T 8 Analog Audio Out Optiva™ VAD Transmission Optiva™ VAD Transmission Data OTS-4VT8AT OTS-4VR8AR Features • Composite Video and Analog Audio over one fiber • 12-Bit Digital Transmission (Video) • TDM - Single Wavelength • Complies with SMPTE Standards • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand-alone or rack-mount • Ideal for Professional AV applications This system can be purchased without an optical port as an add-on to an existing Optiva® system daisy-chain. (See “Non-Optical Version” below). The Optiva bandwidth requirement of this system is 1,444 Mbps. ® Versions Available* Wavelength (nm) & Fiber 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) Non-Optical Version Transmit** OTS-4VT8AT-B1-XX-IC OTS-4VT8AT-B2-XX-IC OTS-4VT8AT-B2D-XX-IC OTS-4VT8AT-B3-XX-IC OTS-4VT8AT-B3D-XX-IC OTS-4VT8AT-L4-XX-IC OTS-4VT8AT-NOC-IC Receive** OTS-4VR8AR-B1-XX-IC OTS-4VR8AR-B2-XX-IC OTS-4VR8AR-B2D-XX-IC OTS-4VR8AR-B3-XX-IC OTS-4VR8AR-B3D-XX-IC OTS-4VR8AR-L4-XX-IC OTS-4VR8AR-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 7 12 17 25 Varies N/A Range*** (km) 1.5 10 20 40 60 20-70 N/A Form Factor IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector General Dimensions & Weight Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz 67 dB BNC (IEC 60169-8) Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Optiva™ Multi-Signal Optiva™ Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 24-bit Micro DB25 Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z CATV/RF & L-Band CATV/RF & L-Band Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Power Supplies Power Supplies and Accessories & Accessories Insert Card (IC): 6.3” L x 0.8” W x 4.0” H Operating temperature -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms (Audio