OTS-8V

OTS-8V Optiva Standard, 8 Composite Video ® Composite Video The OTS-8V provides for the digital transmission of 8 Channels of Composite Video. System Design Video Audio All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Composite Video In Composite Video In Composite Video Out Composite Video Out S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T Composite Video In ST, LC, SC or FC S T A T U S A L E R T S T A T U S A L E R T S T A T U S A L E R T Composite Video Out ST, LC, SC or FC Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Optiva™ VAD Transmission Data OTS-8VT OTS-8VR Features • Composite Video over one fiber • 12-Bit Digital Transmission • TDM - Single Wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast Professional AV applications Versions Available* Wavelength (nm) & Fiber 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) Non-Optical Version Transmit** OTS-8VT-B1-XX-IC OTS-8VT-B2-XX-IC OTS-8VT-B2D-XX-IC OTS-8VT-B3-XX-IC OTS-8VT-B3D-XX-IC OTS-8VT-L4-XX-IC OTS-8VT-NOC-IC Receive** OTS-8VR-B1-XX-IC OTS-8VR-B2-XX-IC OTS-8VR-B2D-XX-IC OTS-8VR-B3-XX-IC OTS-8VR-B3D-XX-IC OTS-8VR-L4-XX-IC OTS-8VR-NOC-IC Optical Connector ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC N/A Optical Budget (dB) 10 7 12 17 25 Varies N/A Range*** (km) 1.5 10 20 40 60 20-70 N/A Form Factor IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz 67 dB BNC (IEC 60169-8) Optiva™ Multi-Signal Optiva™ Configurable Transmission Platform Communication Platform Network Management Network Management SDI and HD-SDI SDI & HD-SDI Composite Video, Composite Video, Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) Data (Ethernet/Serial/USB) CATV/RF & L-Band CATV/RF & L-Band Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite 11 oz Optical Switching, Routing Optical Switching, Routing & Redundancy & Redundancy Passive Multiplexing Passive Multiplexing Solutions Solutions Enclosures, Racks Enclosures, Racks & Frames & Frames Power Supplies Power Supplies and Accessories & Accessories MADE IN THE USA Sample Configuration