420-12.0M-5EC-T

Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator Page 1 of 3 SMD Oscillators Series Number Package Description Last Modified 420 FEATURES - Low Jitter - Extended temperature range capabilities - Tape and Reel - Tri-State enable / disable - 5V or 3.3V optional - RoHs / Lead Free compliant Plastic J-Lead HCMOS / TTL Output Jan. 01 2007 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Output Logic Input Voltage (VDD) Frequency Range (fO) Operating Temperature (TOPR) Storage Temperature (TSTG) Frequency Stability CONDITIONS a+b+c+d (a) Frequency Tolerance (b) Temperature Stability (c) Input Voltage Stability (d) Load Stability Input Current (IDD) Aging Rise Time (TR) / Fall Time (TF) PIN 1 Tri-State Output Voltage High "1" VOH Output Voltage Low "0" VOL Duty Cycle Start-Up Time (TS) Jitter (RMS) @ 25°C TTL Load HCMOS Load TTL Load HCMOS Load 1~ 26 MHz 26 ~ 66.667 MHz 1.000 ~ 50.000 MHz 50.100 ~ 79.900 MHz 80.000 ~ 150.000 MHz 2.7 min. 0.4 max. 0.5 max. 50 ±10 (Std.) / 50 ±5 (Option) 4 max. 10 max. ±10 max. ±5 max. ±3 max. CHARACTERISTICS HCMOS / TTL Output 3.3 ±10% 1.0 ~ 150.000 0 ~ +70 Std. (Ext Temp Avail. See Table Below) -55 ~ +125 ±50, ±100 max. (Tighter Stability Avail.) Inclusive of Overall Stability Inclusive of Overall Stability (Operating Temperature) Inclusive of Overall Stability (VDD ±10%) Inclusive of Overall Stability (RL ±5%) 10 ~ 35 max. ±5 max. 8 max. (0.4V to 2.4V w/ TTL, 20% ~ 80% / HCMOS) Option 2.4 min. VDD-0.5 min. 23 ~ 50 max. 5.0 ±10% UNITS VDC MHz °C °C ppm mA ppm/Y nS VDC VDC % mS ps Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator Page 2 of 3 PIN CONNECTIONS No Connection or #1 Tri-State Enable High #2 Case Ground #3 Output #4 Vdd PART NUMBER GUIDE Series Number Frequency Voltage Supply Option Frequency Tolerance & Stability (max.) Operating Temp. (° C) Duty Cycle Pin 1 Connection 420 Oscilent SMD Oscillators - 12.0M Enter your desired frequency e.g. 12.0M = 12.000MHz See table below for standard frequencies. -3 5 = 5VDC 3 = 3.3VDC D= E= E ±100 PPM ±50 PPM N Blank* = 0~+70 C = -10~+70 D = -20~+70 N = -40~+85 -T Blank*= 50±10% T = -50±5% TS NC = No Connnection TS = Tri-State Enable High NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic. *STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic. PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications PART NUMBER CODING FREQUENCY (1.0 ~ 15.9744 MHz) 1.0 1.2288 1.8432 2.0 2.4576 3.579545 - STANDARD OSCILLATOR FREQUENCIES FREQUENCY (16.0 ~ 66.666 MHz) 16.0 16.257 16.384 17.734475 18.0 18.432 Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator Page 3 of 3 3.6864 4.0 4.9152 5.0 5.0688 6.0 6.144 7.3728 8.0 9.216 9.8304 10.0 11.0592 12.0 12.288 12.8 14.31818 14.7456 15.9744 19.6608 20.0 24.0 24.576 25.0 25.175 28.322 30.0 32.0 32.514 33.0 35.0 40.0 48.0 50.0 64.000 65.0 66.666 - NOTE: Other frequencies available. Please consult Oscilent for part numbers Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: Sales@Oscilent.com Series No.: 420 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map