MKC03-24S33

FEATURES APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment • 3 WATTS REGULATED OUTPUT POWER • OUTPUT CURRENT UP TO 0.5A • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 80% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY (300KHz) • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • OVER CURRENT PROTECTION • OUTPUT 1 / OUTPUT 2 ISOLATION (DS TYPE) • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS SMD TYPE, M1 TYPE DESCRIPTION The MKC03 series offer 3 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 82ºC ambient temperature. MKC03 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load Line regulation LL to HL at Full Load Single No Load to Full Load Dual Load regulation DS Cross regulation (Dual) Asymmetrical load 25% / 100% FL Ripple and noise Temperature coefficient Transient response recovery time 25% load step change Over load protection Short circuit protection Efficiency Isolation voltage Isolation resistance Isolation capacitance Switching frequency Approvals and standard Case material Base material Potting material Dimensions Weight MTBF (Note 1) Input to Output to Case DS type, Output to Output % of FL at nominal input 20MHz bandwidth Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS 3 Watts, max. ± 1% 0% ± 0.2% ± 0.2% ± 1% ± 1% ± 5% See table ±0.02% / ºC, max. 200μS 180%, typ. Input voltage range Input filter 12V input 24V input 48V input Input reflected ripple current Nominal Vin and full load Nominal Vin and Start up time Power up constant resistive load Input surge voltage 100mS max 12V nominal input 24V nominal input 48V nominal input 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type 36VDC 50VDC 100VDC 20mAp-p 350mS,max. ENVIRONMENTAL SPECIFICATIONS Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Nature convection Standard M1 (Note 6) -25ºC ~ +85ºC (with derating) -40ºC ~ +85ºC (non-derating) 100ºC -55ºC ~ +105ºC 20ºC/Watt MIL-STD-810F MIL-STD-810F 5% to 95% RH EN55022 Air EN61000-4-2 Contact EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 ± 8KV ± 6KV 10 V/m Class A Perf. Criteria A Perf. Criteria A Continuous, automatics recovery See table 500VDC, min. 500VDC, min. 10 ohms, min. 300pF, max. 300KHz, typ. IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.069 x 10 hrs 6 MIL-HDBK-217F 2.003 x 10 hrs 9 GENERRALINPUT SPECIFICATIONS EMC CHARACTERISTICS EMI ESD Radiated immunity Fast transient (Note 7) Surge (Note 7) Conducted immunity ± 2KV Perf. Criteria B ± 1KV Perf. Criteria B 10 Vr.m.s Perf. Criteria A Page 1 of 3 Issued Date：2008/05/21 Model Number MKC03-12S33 MKC03-12S05 MKC03-12S12 MKC03-12S15 MKC03-12D05 MKC03-12D12 MKC03-12D15 MKC03-12DS05 MKC03-12DS12 MKC03-12DS15 MKC03-24S33 MKC03-24S05 MKC03-24S12 MKC03-24S15 MKC03-24D05 MKC03-24D12 MKC03-24D15 MKC03-24DS05 MKC03-24DS12 MKC03-24DS15 MKC03-48S33 MKC03-48S05 MKC03-48S12 MKC03-48S15 MKC03-48D05 MKC03-48D12 MKC03-48D15 MKC03-48DS05 MKC03-48DS12 MKC03-48DS15 Input Range 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2:12 VDC V1:15 VDC;V2:15 VDC Output Current Min. load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Full load 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA V1:250mA;V2:250mA V1:125mA;V2:125mA V1:100mA;V2:100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA V1:250mA;V2:250mA V1:125mA;V2:125mA V1:100mA;V2:100mA 500mA 500mA 250mA 200mA ± 250mA ± 125mA ± 100mA V1:250mA;V2:250mA V1:125mA;V2:125mA V1:100mA;V2:100mA Output (4) Ripple & Noise 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p Input Current Full No load(2) load(3) 8mA 10mA 13mA 13mA 13mA 16mA 16mA 18mA 18mA 18mA 12mA 12mA 16mA 16mA 18mA 18mA 18mA 16mA 20mA 20mA 8mA 10mA 10mA 10mA 10mA 12mA 12mA 18mA 18mA 18mA 196mA 286mA 333mA 329mA 293mA 329mA 329mA 293mA 329mA 329mA 101mA 149mA 169mA 169mA 147mA 169mA 169mA 147mA 169mA 169mA 48mA 75mA 84mA 84mA 75mA 86mA 86mA 75mA 86mA 86mA Eff (4) Capacitor(5) (%) Load max 74 77 79 80 75 80 80 75 80 80 72 74 78 78 75 78 78 75 78 78 76 74 79 79 74 77 77 74 77 77 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF V1:470μF;V2:470μF V1:100μF;V2:100μF V1:68μF;V2:68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF V1:470μF;V2:470μF V1:100μF;V2:100μF V1:68μF;V2:68μF 2200μF 1000μF 220μF 150μF ± 470μF ± 100μF ± 68μF V1:470μF;V2:470μF V1:100μF;V2:100μF V1:68μF;V2:68μF 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2:12 VDC V1:15 VDC;V2:15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC V1:5 VDC;V2:5 VDC V1:12 VDC;V2:12 VDC V1:15 VDC;V2:15 VDC Note 1. 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ. Page 2 of 3 Issued Date：2008/05/21 Suffix-SMD 0.100(2.54) 0.08(2.0) 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 0.02(0.5) 1.00(25.4) 0.92(23.4) 0.44(11.2) 0.43(10.9) 0.900 (22.86) 24 23 22 1.25 (31.8) 1 2 3 24 20 16 1 5 9 12 0.80(20.3) 0.100(2.54) 0.15 (3.8) BOTTOM VIEW 0.600(15.24) 0.15 (3.8) 0.40 (10.2) Pin Area 0.04 x 0.02 (1.0 x 0.5) 13 0.80(20.3) 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) DIP PIN CONNECTION PIN 1 2 3 10 11 12 SINGLE DUAL DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT PIN 24 23 22 15 14 13 SINGLE DUAL DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT + INPUT + INPUT NC - OUTPUT NC COMMON -OUTPUT COMMON +OUTPUT +OUTPUT - INPUT - INPUT + INPUT + INPUT NC - OUTPUT NC COMMON - OUTPUT COMMON +OUTPUT +OUTPUT - INPUT - INPUT SMD PIN CONNECTION PIN SINGLE DUAL DS PIN SINGLE DUAL DS + INPUT - V1 out + V1 out - V2 out + V2 out - INPUT NC 1 + INPUT + INPUT 2 NC - OUTPUT 3 NC COMMON 10 -OUTPUT COMMON 11 +OUTPUT +OUTPUT 12 - INPUT - INPUT Others NC NC + INPUT 24 + INPUT + INPUT - V1 out 23 NC - OUTPUT 22 NC COMMON + V1 out 15 -OUTPUT COMMON - V2 out + V2 out 14 +OUTPUT +OUTPUT - INPUT 13 - INPUT - INPUT NC Others NC NC Page 3 of 3 Issued Date：2008/05/21 0.25 (6.4) 15 14 13 10 11 12 1.26 (32.0)