ETQP6F1R1BFA

Choke Coils Power Choke Coil Japan Singapore Series: PCCN6B Industrial Property: Patents 3 (pending) n Features l Capable of corresponding big current á Realization of non-saturation by Dust core ñ ( Reference : 27 A max.) l SMD mount is possble á Thin type (H):6.0 mm (W):12.5 mm (L):12.5 mm ñ l Low loss á Realization by Flat type wire ñ n Recommended Applications l DC/DC comverter for driving PC at high speed l Thin type on-board power supply module for exchanger(10 W to 40 W) n Explanation of Part Numbers E T Q P n Performance Specification Summary Inductance (at 20 ¡C) Part Number µH ETQP6F0R6BFA ETQP6F1R1BFA ETQP6F1R8BFA ETQP6F2R5BFA (Note1) (Note2) 0.58 1.06 1.71 2.45 ±20 Tol. (%) L1 Measurement current at 19 A at 16 A at 14 A at 12 A µH L2 Measurement current Reference Only 0.54 0.99 1.50 2.17 at 27 A at 22 A at 20 A at 17 A DC (20 ¡C) resistance mW (max.) 1.44 2.24 3.30 4.92 Measured Frequency of Inductance is 100 kHz The measurement current value of L1 is the actual value of the current at which the temperature of coil becomes 40 K when DC current flows. Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation. Choke Coils n Performace Characteristics(Reference) DC Current VS Inductance DC Current VS Temperature n Dimensions in mm (not to scale) n Connection ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,,,,,,,, ,,,,,, , ,,,,,, , ,,,,,, , ,,,,,, ,,,,,, ,,,,,, ,,,,,, ,,,,,, ,,,,,, ,,,,,, ,,,,,, , ,,,,,, , ,,,,,, , :Clearance between the Terminal face and the core face :Clearance between the Terminal face and mould resin Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.