GS1AWG_R1_00001

GS1AWG~GS1MWG SURFACE MOUNT GENERAL PURPOSE RECTIFIER 50 to 1000 Volt VOLTAGE 1 Ampere CURRENT FEATURES • For surface mounted applications in order to optimize board space • Easy pick and place • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Low Forward Drop • High temperature soldering : 260°C /10 seconds at terminals • Glass Passivated Junction • Lead free in compliance with EU RoHS 2.0 • Green molding compound as per IEC 61249 standard MECHANICAL DATA • • • • • Case: SMA(W) molded plastic Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Indicated by cathode band Standard packaging: 12 mm tape (EIA-481) Weight: 0.002 ounces, 0.068 grams 1 2 Cathode Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL GS1AWG GS1BWG GS1DWG GS1GWG GS1JWG GS1KWG GS1MWG UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current IF(AV) 1 A Peak Forward Surge Current : 8.3ms single half sinewave superimposed on rated load IFSM 30 A Maximum Forward Voltage at 1A DC VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 1 μA CJ 7 pF RθJA RθJL RθJC 150 15 4.4 -55 to +150 Typical Junction Capacitance Measured at 1MHz and applied VR=4V (Note 1) Typical Junction Resistance (Note 2) (Note 3) Operating and Storage Temperature Range TJ,TSTG C/W O C O Notes:1.Mounted on a FR4 PCB, single-sided copper, mini pad. 2.Mounted on a FR4 PCB, single-sided copper, with 76.2 x 114.3mm copper pad area. 3.Mounted on a FR4 PCB, single-sided copper, with 100cm2 copper pad area. October 17,2019-REV.04 PAGE . 1 1.2 CJ, Junction Capacitance (pF) IF, Forward Current (A) GS1AWG~GS1MWG 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) 1 10 100 VR, Reverse Bias Voltage (V) 100 TJ = 150°C 10 TJ = 125°C TJ = 1 TJ = 75°C 0.1 TJ = 25°C 0.01 100 200 300 400 500 600 700 800 900 1000 VR, Rated Peak Reverse Voltage (V) Fig.3 Typical Reverse Characteristics Peak Forward Surge Current (A) 1 Fig.2 Typical Junction Capacitance IF, Forward Current (A) IR, Reverse Current (uA) Fig.1 Forward Current Derating Curve 10 1 TJ = 150°C TJ = 125°C 0.1 TJ = 75°C TJ = 25°C 0.01 0.2 0.7 1.2 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics 30 8.3ms Single Half Sine-Wave JEDEC Method 25 20 15 10 5 0 1 2 6 10 20 40 60 100 Number Of Cycles At 60Hz Fig.5-Maximum Non-Repetitive Peak Forward Surge Current October 17,2019-REV.04 PAGE . 2 GS1AWG~GS1MWG MOUNTING PAD LAYOUT SMA(W) Unit：inch(mm) 0.228 (5.80) 0.082 (2.07) 0.081 (2.06) 0.065 (1.66) ORDER INFORMATION • Packing information T/R - 7.5K per 13" plastic Reel T/R - 1.8K per 7" plastic Reel October 17,2019-REV.04 PAGE . 3 GS1AWG~GS1MWG Part No_packing code_Version GS1AWG_R1_00001 GS1AWG_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING October 17,2019-REV.04 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 GS1AWG~GS1MWG Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 17,2019-REV.04 PAGE . 5