P6SMB120AS_R1_00001

P6SMB10AS ~ P6SMB250CAS Series Transient Voltage Suppressor Voltage 10~250 V Power 600 W SMB Features  Fast response time  Low incremental surge resistance  Ultra thin profile package for space constrained utilization.  High temperature soldering : 260oC/10 seconds at terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SMB  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Approx. Weight: 0.0032 ounces, 0.092 grams Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10 / 1000 us) Peak Pulse Current on tp = 10 / 1000 us waveform(Fig.2) Power Dissipation on Infinite Heat Sink at TL = 50 oC ESD IEC61000-4-2(Air) Typical Thermal Resistance Junction to Ambient Storage Temperature Range October 7,2021 UNITS 600 W IPPM (1) See table 1 A PD 5 W PPP (1) (2) VESD ESD IEC61000-4-2(Contact) Operating Junction Temperature Range LIMIT ±30 ±30 kV RθJA (3) 150 oC/W TJ -55~150 oC TSTG -55~150 oC P6SMB10AS_SERIES-REV.02 Page 1 P6SMB10AS ~ P6SMB250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 600W Transient Voltage Suppressor P6SMB10AS P6SMB10CAS 8.55 9.5 10.5 1 10 20 14.5 41 MBAA MBBN P6SMB11AS P6SMB11CAS 9.4 10.5 11.6 1 5 10 15.6 38 MBAB MBBP P6SMB12AS P6SMB12CAS 10.2 11.4 12.6 1 5 5 16.7 36 MBAC MBBR P6SMB13AS P6SMB13CAS 11.1 12.4 13.7 1 1 1 18.2 33 MBAD MBBS P6SMB15AS P6SMB15CAS 12.8 14.3 15.8 1 1 1 21.2 28 MBAE MBBT P6SMB16AS P6SMB16CAS 13.6 15.2 16.8 1 1 1 22.5 27 MBAF MBBU P6SMB18AS P6SMB18CAS 15.3 17.1 18.9 1 1 1 25.2 24 MBAG MBBV P6SMB20AS P6SMB20CAS 17.1 19 21 1 1 1 27.7 22 MBAH MBBW P6SMB22AS P6SMB22CAS 18.8 20.9 23.1 1 1 1 30.6 20 MBAJ MBBX P6SMB24AS P6SMB24CAS 20.5 22.8 25.2 1 1 1 33.2 18 MBAK MBBY P6SMB27AS P6SMB27CAS 23.1 25.7 28.4 1 1 1 37.5 16 MBAL MBBZ P6SMB30AS P6SMB30CAS 25.6 28.5 31.5 1 1 1 41.4 14.4 MBAM MBCA P6SMB33AS P6SMB33CAS 28.2 31.4 34.7 1 1 1 45.7 13.2 MBAN MBCB P6SMB36AS P6SMB36CAS 30.8 34.2 37.8 1 1 1 49.9 12 MBAP MBCC P6SMB39AS P6SMB39CAS 33.3 37.1 41 1 1 1 53.9 11.2 MBAR MBCD P6SMB43AS P6SMB43CAS 36.8 40.9 45.2 1 1 1 59.3 10.1 MBAS MBCE P6SMB47AS P6SMB47CAS 40.2 44.7 49.4 1 1 1 64.8 9.3 MBAT MBCF P6SMB51AS P6SMB51CAS 43.6 48.5 53.6 1 1 1 70.1 8.6 MBAU MBCG P6SMB56AS P6SMB56CAS 47.8 53.2 58.8 1 1 1 77 7.8 MBAV MBCH P6SMB62AS P6SMB62CAS 53 58.9 65.1 1 1 1 85 7.1 MBAW MBCJ P6SMB68AS P6SMB68CAS 58.1 64.6 71.4 1 1 1 92 6.5 MBAX MBCK P6SMB75AS P6SMB75CAS 64.1 71.3 78.8 1 1 1 103 5.8 MBAY MBCL P6SMB82AS P6SMB82CAS 70.1 77.9 86.1 1 1 1 113 5.3 MBAZ MBCM P6SMB91AS P6SMB91CAS 77.8 86.5 95.5 1 1 1 125 4.8 MBBA MBCN P6SMB100AS P6SMB100CAS 85.5 95 105 1 1 1 137 4.4 MBBB MBCP P6SMB110AS P6SMB110CAS 94 105 116 1 1 1 152 4 MBBC MBCR P6SMB120AS P6SMB120CAS 102 114 126 1 1 1 165 3.6 MBBD MBCS P6SMB130AS P6SMB130CAS 111 124 137 1 1 1 179 3.3 MBBE MBCT P6SMB150AS P6SMB150CAS 128 143 158 1 1 1 207 2.9 MBBF MBCU P6SMB160AS P6SMB160CAS 136 152 168 1 1 1 219 2.7 MBBG MBCV October 7,2021 P6SMB10AS_SERIES-REV.02 Page 2 P6SMB10AS ~ P6SMB250CAS Series Electrical Characteristics (TA = 25 oC unless otherwise noted) IR VBR Part Number UNI VRWM BI VC@IPP @VRWM Marking Code Min. Max. IT uA V V V mA UNI BI V A UNI BI 600W Transient Voltage Suppressor P6SMB170AS P6SMB170CAS 145 162 179 1 1 1 234 2.6 MBBH MBCW P6SMB180AS P6SMB180CAS 154 171 189 1 1 1 246 2.4 MBBJ MBCX P6SMB200AS P6SMB200CAS 171 190 210 1 1 1 274 2.2 MBBK MBCY P6SMB220AS P6SMB220CAS 185 209 231 1 1 1 328 1.9 MBBL MBCZ P6SMB250AS P6SMB250CAS 214 237 263 1 1 1 344 1.8 MBBM MBDA Notes : 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.2 2. Mounted on 100cm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, standard footprint October 7,2021 P6SMB10AS_SERIES-REV.02 Page 3 P6SMB10AS ~ P6SMB250CAS Series 10 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25℃ 1 0.1 1 10 100 1,000 10,000 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 0 25 Fig.1 Pulse Power Rating Curve 75 100 125 150 175 200 Fig.2 Derating Curve 10,000 110 100 90 80 70 60 50 40 30 20 10 0 CJ - Junction Capacitance(pF) Percent of IPP (%) 50 TA - Ambient Temperature(℃) td - Pulse Width(us) 50% of IPP@1000us Rise time 10~90%-10us 0 1 2 3 Time (ms) Fig.3 10/1000us Pulse Waveform October 7,2021 4 Uni-direconal VR = 0 V 1,000 100 Bi-direconal VR = 0 V 10 1 1 10 100 1000 VRWM - Reverse Stand-off Voltage (V) Fig.4 Typical Capacitance P6SMB10AS_SERIES-REV.02 Page 4 P6SMB10AS ~ P6SMB250CAS Series Part No. Packing Code Version Part No. Packing Code Package Type Packing Type Marking Version P6SMBxxxxAS_R1_00001 SMB 0.8K pcs / 7” reel See Table Halogen free RoHS compliant Packaging Information & Mounting Pad Layout SMB Dimension October 7,2021 Unit: inch(mm) SMB Pad Layout P6SMB10AS_SERIES-REV.02 Unit: inch(mm) Page 5 P6SMB10AS ~ P6SMB250CAS Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. October 7,2021 P6SMB10AS_SERIES-REV.02 Page 6