EPJ9632E-S9-RC

10/100Base-TX Single Port RJ-45 Jack ELECTRONICS INC. EPJ9632E-S9-RC • Space Saving RJ-45 Connectors • UL94V-0 Rated Connector Housing • Complete Bob Smith Termination Included • Operating Temperature : -40°C to +85°C • MDI/MDI-X Compatible • 1500 Vrms Isolation • RoHS Compliant Electrical Parameters @ 25° C Turns Ratio ( ± 3% ) Xmit/Rcv 1CT:1CT/1CT:1CT OCL (µH Min.) @100 KHz, 0.1 Vrms 8 mA DC Bias 350 Insertion Loss (dB Max.) 1-65 MHz -1.0 1-10 MHz -20 Return Loss (dB Min.) 10-30 MHz -16 30-60 MHz -12 60-80 MHz -10 CMRR (dB Min.) 1-50 MHz -30 50 -150 MHz -20 1-30 MHz -40 Crosstalk (dB Min.) 30-60 MHz -35 60-100 MHz -30 Schematic Transmit TD+ P1 CT P4 TD- P2 P12 Note : Connect P8 to Analog Gnd (Chasis Gnd) P11 Green LED 1.00 (25.40) .335 (8.50) LED .594 .535 (15.10) (13.60) .130 (3.30) .450 (11.43) .350 (8.89) 11 12 7531 8642 P8 J1 TX+ 1000pF 2KV J4 J5 J7 J8 RX+ J3 Receive P3 RD+ P5 CT RX- J6 75 Ω 1CT:1CT P6 RDP10 75 Ω 75 Ω 1CT:1CT J2 TX- 75 Ω Yellow LED .630 (16.00) Package Green LED Marking : PCA EPJ9632E-S9-RC D.C. P9 Yellow LED LED J8 J1 .425 (10.79) .190 (4.83) .100 (2.54) 4 x Ø.050 (1.27) 8 x Ø.035 (.900) 2 x Ø.070 (1.70) 2 x Ø.126 (3.20) 10 9 .100 (2.54) Notes : EPJ9632E-S9-RC SnCu 260°C (72 Hours, ≤30°C/60%RH) .350 (8.89) .120 (3.05) 1. Lead Finish 2. Peak Temperature Rating (Wave Solder Process Only) 3. Moisture Sensitive Levels 4. Weight 5. Packaging Information (Tray) MSL = 1 .430 (10.92) .450 (11.43) .620 (15.75) Suggested PCB Layout (Component Side) 7.41 grams 60 pieces/tray Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSJ9632E-S9-RC Rev. 7/17/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com