M2352

FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 8 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S - EXTENDED TEMPERATURE RANGE TO -40/+85°C PETERMANN TECHNIK Time & Frequency Components M2352 8 PIN DIP 125.0 ~ 180.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +3.3 VDC +-10% 40 mA max. 40/60% 45/55% 10 ns max. (10% VDD ~ 90% VDD) 10% VDD max. 90% VDD min. 15 pF WITHOUT ENABLE/DISABLE FUNCTION WITH ENABLE/DISABLE FUNCTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE SEE OUTLINE DRAWINGS PIN CONNECTION 10 ms max. START-UP TIME 25 ps max. PERIOD JITTER RMS OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE INPUT CURRENT STANDARD SYMMETRY OPTION RISE AND FALL TIME HCMOS OUTPUT "0" LEVEL HCMOS 3.3 VOLT "1" LEVEL LOAD HCMOS STANDARD PIN 1 OPTION PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY M2352 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY M2352-25-W-S-E-G-180.0MHz TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2352 OUTLINE DRAWING OF M2352 GULL WING 14.98+0.2 #4 #5 6.8max 5.3max 12.7max 0.8 5.5max 4-00.55max 1.14 7.62+0.1 - 1.27+0.127 - 12.7max #1 #4(Grounded to the Case) 12.9max 7.62 #1 0.63+0.1 - #8 Unit: mm #8 #5 7.62 12.9max PIN #1 #4 #5 #8 Connection NC/Tri-State GND Output VDD Unit:mm TEST CIRCUIT FOR HCMOS HCMOS OUTPUT WAVE FORM (HCMOS LOAD) tr tf VOH 90%VDD CL =15pF + mA M #14 + VM - TEST POINT #8 + POWER SUPPLY - VCC OUT OSCILLATOR 0,1µF GND #1 #7 TRI-STATE-INPUT 7.62+0.1 - 50%VDD NOTE: CL includes probe and fixture capacitance 10%VDD VOL Th T DUTY=Th/T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de