PSA65U-240

WWW.PHIHONG.COM 60 Watt Universal Switching Adapter PSA65U Single Output Series Features • High Efficiency • Class B EMI Applications • Portable Equipment • Peripherals Safety Approvals • cUL/UL • CE Mechanical Characteristics • Length: 150.5mm (5.9in) • Width: 70.5mm (2.8in) Output Specifications Model PSA65U-120 PSA65U-150 PSA65U-180 PSA65U-240 DC Output Voltage +12V +15V +18V +24V Load Min. 0A 0.1A 0A 0A Max. 5A 4A 3.3A 2.5A • • • • • • • • Non-vented/Spill-proof Case IEC320 C14 Grounded Input Notebook Computers Networking TUV Meeting Cal. Prop. 65 Height: 39mm (1.5in) Weight: 550g (20oz.) Ripple (1) P-P (max.) 120mV 150mV 180mV 240mV Regulation Line & Load ±5% ±5% ±5% ±5% (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz. Phihong is not responsible for any error and change. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSA65U Characteristics INPUT: AC Input Voltage Rating 100 to 240VAC WWW.PHIHONG.COM Over-current Protection Output equipped with short circuit protection – auto restart AC Input Voltage Range 90 to 264VAC Short Circuit Protection Output can be shorted without damage AC Input Frequency 47 to 63Hz ENVIRONMENTAL: Tempeature Operation Non-operation 0 to +40°C -30 to +70°C Input Current 1.5A (rms) Max. @ 115VAC 0.8A (rms) Max. @ 230VAC Humidity Leakage Current 3.5mA Max. Operation 8 to 90% Emissions Inrush Current (cold) 30A for 115VAC at Max. load 60A for 230VAC at Max. load (Cold start @ ambient 25°C) FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000VAC for 1 minute, 10mA OUTPUT: Efficiency 80% typical DC Output Connector 2.1x5.5mm Center Positive Standard Hold-up Time 16mS Min. @ 120VAC and Max. load Over-voltage Protection >130% over-voltage detection, adapter will be shut down Dimension Diagram Unit: mm