CR2427S

DISCRETE SEMICONDUCTORS DATA SHEET CR2427S Video driver hybrid amplifier Product specification File under Discrete Semiconductors, SC05 1995 Feb 09 Philips Semiconductors Philips Semiconductors Product specification Video driver hybrid amplifier FEATURES • Typical transition times (10 to 90%) with CL = 8.5 pF: – at 35 V (p-p) swing tr = 2.2 ns; tf = 2.0 ns – at 40 V (p-p) swing tr = 2.3 ns; tf = 2.1 ns – at 50 V (p-p) swing tr = 2.5 ns; tf = 2.2 ns • Low power consumption • Minimum small signal bandwidth 130 MHz • Very fast slew rate; 15000 V/µs • Excellent grey-scale linearity • Unconditional stability • Gold metallization ensures excellent reliability. APPLICATIONS It is designed for application in cathode-ray tube (CRT) drivers in high-resolution colour and monochrome monitors. DESCRIPTION Hybrid amplifier module mounted in SOT348 package. PINNING PIN 1 2 3 4 5 DESCRIPTION input ground supply voltage (VS) ground output Front view 1 handbook, 2 columns CR2427S 5 MBB932 Fig.1 SOT348. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VS Tmb Tstg Note 1. To ensure proper thermal contact, a layer of heatsink compound should be applied between module and heatsink. PARAMETER supply voltage (DC) operating mounting base temperature; note 1 storage temperature − −20 −40 MIN. MAX. 70 +100 +125 V °C °C UNIT 1995 Feb 09 2 Philips Semiconductors Product specification Video driver hybrid amplifier CHARACTERISTICS Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF (see Fig.10); unless otherwise specified. SYMBOL PARAMETER CONDITIONS MIN. TYP. CR2427S MAX. UNIT VS = 60 V; 40 V (p-p) output swing with 30 V (DC) offset; unless otherwise specified IS VI VO tr tf supply current input voltage (DC) output voltage (DC) rise time transient response fall time transient response input and output open input and output open input and output open 10 to 90%; note 1 10 to 90%; note 1 39 1.3 28 − − − 1.4 29 − − 45 1.6 31 2.3 2.1 51 1.9 34 2.9 2.6 mA V V ns ns VS = 65 V; 50 V (p-p) output swing with 32.5 V (DC) offset; unless otherwise specified IS VI VO tr tf supply current input voltage (DC) output voltage (DC) rise time transient response fall time transient response input and output open input and output open input and output open 10 to 90%; note 2 10 to 90%; note 2 50 1.75 32 2.5 2.2 57 2.1 35 3.2 3.2 mA V V ns ns VS = 60 V or 65 V; 40 V (p-p) or 50 V (p-p) output swing with 30 V (DC) or 32.5 V (DC) offset; unless otherwise specified Ptot Bs Vtilt Vos NLN AV VG Notes 1. Input signal is a nominal 100 kHz square wave of 3.25 V (p-p), with 1.5 V (DC) offset (50 Ω source). 2. Input signal is a nominal 100 kHz square wave of 3.4 V (p-p), with 1.65 V (DC) offset (50 Ω source). 3. Sine wave output signal: 1 V (p-p). 4. Measured VO/VI (Figs 2 and 6) at input test circuit (see Fig.10). 5. Measured VO/VI (Figs 3 and 7) at input module (see Fig.10). total power dissipation small signal bandwidth low frequency tilt voltage overshoot voltage non-linearity DC voltage gain insertion gain 50 MHz square wave between −3 dB points; note 3 1 kHz square wave varied by C1; see Fig.10 VO = 5 to 55 V 50 Ω source; note 4 50 Ω source; note 5 − 130 − − − 11.2 160 4.6 145 1.3 3 2 12.4 180 6 − 1.5 10 5 13.2 200 W MHz V % % 1995 Feb 09 3 Philips Semiconductors Product specification Video driver hybrid amplifier CR2427S MLB868 handbook, halfpage 5 handbook, halfpage 1.8 MLB867 VI (V) 3 VI (V) 1.6 1 1.4 1 1.2 0 20 40 VO (V) 60 0 20 40 VO (V) 60 VS = 60 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 40 V (p-p) output swing with 30 V (DC) offset (see Fig.10). VS = 60 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 40 V (p-p) output swing with 30 V (DC) offset (see Fig.10). Fig.2 Input voltage at input test-circuit as a function of output voltage; typical values. Fig.3 Input voltage at input module as a function of output voltage; typical values. handbook, halfpage 3.0 MRA627 - 1 MRA628 - 1 handbook, halfpage 3.0 tr (ns) 2.6 40 V (p-p) tf (ns) 2.6 40 V (p-p) 35 V (p-p) 30 V (p-p) 2.2 2.2 35 V (p-p) 30 V (p-p) 1.8 6 8 10 12 14 16 CL (pF) 1.8 6 8 10 12 14 16 CL (pF) VS = 60 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 40, 35, 30 V (p-p) output swing with 30 V (DC) offset. VS = 60 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 40, 35, 30 V (p-p) output swing with 30 V (DC) offset. Fig.4 Rise time transient response as a function of load capacitance; typical values. Fig.5 Fall time transient response as a function of load capacitance; typical values. 1995 Feb 09 4 Philips Semiconductors Product specification Video driver hybrid amplifier CR2427S handbook, halfpage 5 MLB869 MLC752 2.0 handbook, halfpage VI (V) VI (V) 3 1.8 1 1.6 1 0 20 40 60 VO (V) 80 1.4 0 20 40 60 VO (V) 80 VS = 65 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 50 V (p-p) output swing with 32.5 V (DC) offset (see Fig.10). VS = 65 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 50 V (p-p) output swing with 32.5 V (DC) offset (see Fig.10). Fig.6 Input voltage at input test-circuit as a function of output voltage; typical values. Fig.7 Input voltage at input module as a function of output voltage; typical values. MRA617 - 1 MRA615 - 1 handbook, halfpage 3.4 handbook, halfpage 3.2 tr (ns) 3.0 tf (ns) 2.8 2.6 2.4 2.2 6 10 14 C L (pF) 18 2.0 6 10 14 C L (pF) 18 VS = 65 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 50 V (p-p) output swing with 32.5 V (DC) offset. VS = 65 V; Tmb = 25 °C; CL = 8.5 pF; R1 = 215 Ω; C1 = 50 pF; 50 V (p-p) output swing with 32.5 V (DC) offset. Fig.8 Rise time transient response as a function of load capacitance; typical values. Fig.9 Fall time transient response as a function of load capacitance; typical values. 1995 Feb 09 5 Philips Semiconductors Product specification Video driver hybrid amplifier CR2427S handbook, full pagewidth VS C2 C1 3 4 input 50 Ω 1 R1 2 CL CR2427S 5 output PULSE GENERATOR BIAS UNIT TEST FIXTURE CR2427S FET PROBE SAMPLING OSCILLOSCOPE MAM120 POWER SUPPLY Fig.10 CRT amplifier test-circuit and block diagram. Components used in test-circuit (see Fig.10) DESIGNATION C1 C2 R1 DESCRIPTION variable capacitor chip capacitor resistor 10 nF typ. 215 Ω VALUE 10 to 120 pF (typ. 50 pF) Equipment used in test-circuit (see Fig.10) EQUIPMENT Pulse generator Bias unit Power supply FET probe Sampling oscilloscope Pico Second; Model 2600B Pico Second; Model 5555 Philips; Model PE1541, 80 V Philips; Model PM8943, attenuation 100 : 1 Tektronix; Model 11803, sampling head SD24 TYPE DESCRIPTION 1995 Feb 09 6 Philips Semiconductors Product specification Video driver hybrid amplifier CR2427S handbook, full pagewidth 150 kΩ 3 kΩ 680 pF 100 V supply 150 pF 6.8 Ω 22 nF 100 V 3 kΩ 180 Ω 22 nF 100 V 30 Ω 82 pF 10 nF 100 V 6.4 kΩ 47 Ω 10 Ω 1 nF 10 Ω output input 150 pF 180 Ω 30 Ω 82 pF 6.8 Ω MLB839 Fig.11 Internal circuit. 1995 Feb 09 7 Philips Semiconductors Product specification Video driver hybrid amplifier PACKAGE OUTLINE CR2427S handbook, full pagewidth 27.2 max 25.5 max 4.15 3.85 2 5 23.5 max 13.8 max 1 6 min 2 3 4 5 3.8 max 5.08 (4x) 0.25 0.51 0.38 O 0.25 M 1.8 6 max MBB931 Dimensions in mm. Heatsink compound must be applied sparingly and evenly distributed. Fig.12 SOT348. 1995 Feb 09 8 Philips Semiconductors Product specification Video driver hybrid amplifier DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values CR2427S This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1995 Feb 09 9 Philips Semiconductors Product specification Video driver hybrid amplifier NOTES CR2427S 1995 Feb 09 10 Philips Semiconductors Product specification Video driver hybrid amplifier NOTES CR2427S 1995 Feb 09 11 Philips Semiconductors – a worldwide company Argentina: IEROD, Av. Juramento 1992 - 14.b, (1428) BUENOS AIRES, Tel. (541)786 7633, Fax. (541)786 9367 Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. (02)805 4455, Fax. (02)805 4466 Austria: Triester Str. 64, A-1101 WIEN, P.O. Box 213, Tel. (01)60 101-1236, Fax. (01)60 101-1211 Belgium: Postbus 90050, 5600 PB EINDHOVEN, The Netherlands, Tel. (31)40 783 749, Fax. (31)40 788 399 Brazil: Rua do Rocio 220 - 5th floor, Suite 51, CEP: 04552-903-SÃO PAULO-SP, Brazil. P.O. Box 7383 (01064-970). Tel. (011)821-2333, Fax. (011)829-1849 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS: Tel. (800) 234-7381, Fax. (708) 296-8556 Chile: Av. Santa Maria 0760, SANTIAGO, Tel. (02)773 816, Fax. (02)777 6730 Colombia: IPRELENSO LTDA, Carrera 21 No. 56-17, 77621 BOGOTA, Tel. (571)249 7624/(571)217 4609, Fax. (571)217 4549 Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S, Tel. (032)88 2636, Fax. (031)57 1949 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. (9)0-50261, Fax. (9)0-520971 France: 4 Rue du Port-aux-Vins, BP317, 92156 SURESNES Cedex, Tel. (01)4099 6161, Fax. (01)4099 6427 Germany: P.O. Box 10 63 23, 20043 HAMBURG, Tel. (040)3296-0, Fax. (040)3296 213. Greece: No. 15, 25th March Street, GR 17778 TAVROS, Tel. (01)4894 339/4894 911, Fax. (01)4814 240 Hong Kong: PHILIPS HONG KONG Ltd., 15/F Philips Ind. Bldg., 24-28 Kung Yip St., KWAI CHUNG, N.T., Tel. (852)424 5121, Fax. (852)480 6960/480 6009 India: Philips INDIA Ltd, Shivsagar Estate, A Block , Dr. Annie Besant Rd. Worli, Bombay 400 018 Tel. (022)4938 541, Fax. (022)4938 722 Indonesia: Philips House, Jalan H.R. Rasuna Said Kav. 3-4, P.O. Box 4252, JAKARTA 12950, Tel. (021)5201 122, Fax. (021)5205 189 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. (01)640 000, Fax. (01)640 200 Italy: PHILIPS SEMICONDUCTORS S.r.l., Piazza IV Novembre 3, 20124 MILANO, Tel. (0039)2 6752 2531, Fax. (0039)2 6752 2557 Japan: Philips Bldg 13-37, Kohnan 2 -chome, Minato-ku, TOKYO 108, Tel. (03)3740 5028, Fax. (03)3740 0580 Korea: (Republic of) Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. (02)794-5011, Fax. (02)798-8022 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. (03)750 5214, Fax. (03)757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TX 79905, Tel. 9-5(800)234-7381, Fax. (708)296-8556 Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB Tel. (040)783749, Fax. (040)788399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. (09)849-4160, Fax. (09)849-7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. (022)74 8000, Fax. (022)74 8341 Pakistan: Philips Electrical Industries of Pakistan Ltd., Exchange Bldg. ST-2/A, Block 9, KDA Scheme 5, Clifton, KARACHI 75600, Tel. (021)587 4641-49, Fax. (021)577035/5874546. Philippines: PHILIPS SEMICONDUCTORS PHILIPPINES Inc, 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. (02)810 0161, Fax. (02)817 3474 Portugal: PHILIPS PORTUGUESA, S.A., Rua dr. António Loureiro Borges 5, Arquiparque - Miraflores, Apartado 300, 2795 LINDA-A-VELHA, Tel. (01)4163160/4163333, Fax. (01)4163174/4163366. Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231, Tel. (65)350 2000, Fax. (65)251 6500 South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000, Tel. (011)470-5911, Fax. (011)470-5494. Spain: Balmes 22, 08007 BARCELONA, Tel. (03)301 6312, Fax. (03)301 42 43 Sweden: Kottbygatan 7, Akalla. S-164 85 STOCKHOLM, Tel. (0)8-632 2000, Fax. (0)8-632 2745 Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH, Tel. (01)488 2211, Fax. (01)481 77 30 Taiwan: PHILIPS TAIWAN Ltd., 23-30F, 66, Chung Hsiao West Road, Sec. 1. Taipeh, Taiwan ROC, P.O. Box 22978, TAIPEI 100, Tel. (02)388 7666, Fax. (02)382 4382. Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, Bangkok 10260, THAILAND, Tel. (662)398-0141, Fax. (662)398-3319. Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL, Tel. (0 212)279 2770, Fax. (0212)282 6707 United Kingdom: Philips Semiconductors LTD., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. (0181)730-5000, Fax. (0181)754-8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. (800)234-7381, Fax. (708)296-8556 Uruguay: Coronel Mora 433, MONTEVIDEO, Tel. (02)70-4044, Fax. (02)92 0601 Internet: http://www.semiconductors.philips.com/ps/ For all other countries apply to: Philips Semiconductors, International Marketing and Sales, Building BE-p, P.O. Box 218, 5600 MD, EINDHOVEN, The Netherlands, Telex 35000 phtcnl, Fax. +31-40-724825 SCD38 © Philips Electronics N.V. 1994 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 123065/1500/01/pp12 Document order number: Date of release: 1995 Feb 09 9397 747 70011 Philips Semiconductors