PE1144TEV

PE11T Series 3.3 V PECL Clock Oscillators January 2008 This device is obsolete, January 2008 This is replaced by the PE91xxDV device For new designs use the PE99xxDV device • Pletronics’ PE11T Series is a quartz crystal controlled precision square wave generator with a PECL output. • FR4 base with a mechanical metal cover. • Tape and Reel or cut tape packaging is available. • 180 to 750 MHz • 13.97mm x 9.90mm package • Enable/Disable Function on pad 2 sets output to a fixed logic level (see PE37T for E/D on pad 1) • Low Jitter Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 1.33 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo Io Input Voltage Output Voltage Output Current Unit -0.5V to +8.0V -0.5V to +6.0V -0.5V to VCC + 0.5V +25 mA continuous Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2006, 2007, 2008 Pletronics Inc. PE11T Series 3.3 V PECL Clock Oscillators January 2008 Part Number: PE11 45 T E V - 622.08M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHz Supply Voltage VCC V = 3.3V _ 10% + Optional Enhanced OTR Blank = Temp. range -10 to +70oC E = Temp. range -40 to +85oC Series Model Frequency Stability 45 = + 50 ppm _ 44 = + 25 ppm _ 20 = + 20 ppm _ Series Model Marking Legend: PLE = Pletronics FF.FFF M = Frequency in MHz YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day) All other marking is internal factory codes Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 6 2006 A JAN 2 2 E 14 U 26 7 2007 B FEB 3 3 F 15 V 27 8 2008 C MAR 4 4 G 16 W 28 9 2009 D APR E MAY 5 5 H 17 X 29 0 2010 F JUN 6 6 J 18 Y 30 1 2011 G JUL 7 7 K 19 Z 31 H AUG 8 8 L 20 2 2012 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 Part Marking: PLE PE11T FF.FFF M C YMDXX or PE11Tx FF.FFF M PLE xx C YYWWXX www.pletronics.com 425-776-1880 2 PE11T Series 3.3 V PECL Clock Oscillators January 2008 Electrical Specification for 3.30V _10% over the specified temperature range + Item Frequency Range Frequency Accuracy “45" “44" “20" Output Waveform Output High Level 2.255 0.955 -1.045 Output Low Level Output Symmetry Jitter 45 Output TRISE and TFALL VCC Supply Current (ICC) Enable/Disable Internal Pull-up V disable V enable Enable time Disable time Start up time Operating Temperature Range 15 2.40 -10 - 40 Storage Temperature Range -55 Min 180 -50 -25 -20 Max 750 +50 +25 +20 PECL /ECL 1.745 0.445 -1.555 55 0.65 6.0 0.3 100 0.6 20 20 10 +70 +85 +125 volts volts volts volts volts volts % pS RMS pS RMS nS mA Kohm volts volts nS nS mS o Unit MHz ppm Condition For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures Referenced to Ground, VCC = 3.30 V Referenced to termination voltage Referenced to Vcc Referenced to Ground, VCC = 3.30 V Referenced to termination voltage Referenced to Vcc at 50% point of VCC (See load circuit) 12 KHz to 20 MHz from the output frequency 10 Hz to 1 MHz from the output frequency Vth is 20% and 80% of waveform to VCC Referenced to pad 3 Referenced to pad 3 Time for output to reach a logic state Time for Out = Logic High and Out* = logic low Time for output to reach specified frequency Standard Temperature Range Extended Temperature Range “E” Option C C C o o Specifications with Pad 2 E/D open circuit www.pletronics.com 425-776-1880 3 PE11T Series 3.3 V PECL Clock Oscillators January 2008 Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 PE11T Series 3.3 V PECL Clock Oscillators January 2008 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 1500 1000 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept both Enable/Disable input pad versions to be used (See PE37T for E/D on pad 1) For Optimum Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 5 PE11T Series 3.3 V PECL Clock Oscillators January 2008 Mechanical: Inches A B C D1 E1 F1 Cover: Centered on the base 304 Stainless Steel 0.010 inch (0.25mm) Electroless Nickel Plated 1 µinch (25 µm) typical FR4 PCB Label: White Kapton with Black Letters –or-Blue Epoxy heat cure ink covering top with laser marked lettering Base: Solder masked All via holes tented on bottom Copper Clad 670 µinch (17 µm) Nickel plated 118 µinch (3 µm) Gold plated 0.8 µinch (0.02 µm) Typical thicknesses Pin 3 Ground plane is typical Not to scale G1 H1 I1 J1 K1 0.390 +0.010 _ 0.550 +0.010 _ 0.195 max 0.026 typ. 0.050 0.028 R 0.180 0.100 0.050 0.015 0.380 mm 9.90 +0.25 _ 13.97 +0.25 _ 4.95 max 0.66 1.27 0.72 R 4.57 2.54 1.27 0.38 9.65 • • • The package is not hermetically sealed. The sides are intentionally left open to permit cleaning material to freely flow in the package, thus minimizing the accumulation of contaminants during cleaning processes. The internal part of the package must be thoroughly dry before operating. Pad 1 2 Function No connect Output Enable/Disable Ground (GND) Output Output* Supply Voltage (VCC) Note There is no internal connection to this pad When this pad is not connected the oscillator shall operate. When this pad is