AND5BB

AND5BB Ultra Bright LED Lamps Weight: 2.0 mg Unit: mm Cathode Index R0.9±0.1 Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. AND5BB InGaN Ultra Bright Blue Light Emission Surface Mount Package 2.2±0.1 ø1.8±0.1 3.2±0.2 0.5±0.1 2.4±0.1 0.5±0.1 2.5±0.2 • RoHS Compliant • Small package size (12mm tape on 7" diameter reel) • Compatible with automatic placement equipment • Compatible with infrared & vapor phase reflow solder process • Mono-color type Maximum Ratings (Ta = 25°C) Features 2.0 Characteristics Forward Current Polarity Symbol IF VR PD TOpr TStg Rating 30 5 120 -20 to 80 -30 to 90 Unit mA V mW °C °C Reverse Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Precaution Symbol VF IR IV lP ∆l ld θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 118 – – – – Typical 3.5 – 150 468 40 470 30 Maximum 4.0 10 – – – – – Unit V µA mcd nm nm nm degree Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 10 sec. max. Temperature 140 - 160°C 230°C max. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. more than 2 min. Time 4°C/sec. max. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 06-01-02 www.purdyelectronics.com AND5BB InGaN Ultra Bright Blue Light Emission Surface Mount Package Ultra Bright LED IF — VF 50 40 30 20 IV — IF 1000 Ta = 25°C Luminous Intensity IV (mcd) Forward Current IF (mA) Ta = 25°C 100 10 0 1.8 10 2.4 3.0 3.6 4.2 4.8 5.4 6.0 1 Forward Voltage VF (V) 10 Forward Current IF (mA) 100 IV — TC 1000 1.0 Relative Luminous Intensity — Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity -20 0 20 40 60 80 0.8 100 0.6 0.4 10 0.2 0 390 430 510 470 550 Wavelength λ (nm) 590 1 Case Temperature TC (°C) Radiation Pattern 40 10° 0° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 IF — Ta 20° 30° 40° 50° 60° 70° 80° 90° 10° Allowable Forward Current IF (mA) 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 06-01-02 www.purdyelectronics.com