RQRA-1500-LPH

RQRA CRO VCO SERIES Page 1 of 4 RQRA-1500-LPH ELECTRICAL SPECIFICATIONS PARAMETER CONDITION SYMBOL VALUE Min. Frequency Range Vt=1.0V~4.0 V fo(Vt) Power Supply Voltage ±5.0% Vcc Tuning Voltage Supply Current Tuning Sensitivity Typ. Max. 1500 MHz 5.0 Vt Vcc=5.0V ±5% Vt=1.0~4.0V Vcc=5.0V ±5% T=25°C UNIT V 1.0 4.0 V Icc 27 mA df/dVt 4.0 MHz/V 65 pF 1000 KHz Tuning Port Capacitance Modulation Bandwidth BW @ 3 dB Pushing Vcc ±5% df/dVcc 0.1 0.2 Pulling 1.2 @12dBr, all phases df/dZL 0.1 0.2 MHz p-p MHZ/V Operating Temperature Ta -40 85 °C Storage Temperature Tstor -55 125 °C -0.4 7.0 V Maximum Limits Voltage Vcc(abs) Moisture Sensitivity Level MSL JEDEC JSTD-2 HBM Human body model JESD22A114 Termination; Finish 1 Glass-reinforced laminate base and nickel-silver cover ESD Sensitivity kV 3 SINE-WAVE OUTPUT CHARACTERISTICS PARAMETER SYMBOL Output Power Pw CONDITION 2 VALUE Min Typ. Max UNIT -2.5 0 2.0 dBm -13 -10 dBc -20 -10 dBc 2nd Harmonic Suppression h 3nd Harmonic Suppression h3 Spurious (Non-Harmonic) Sp -- dBc Output Load OCL 50 Ω Output termination 50 Vcc=5.0V ±5% RUBYQUARTZ, LLC ▪ 18205 Biscayne Blvd Suite 2217 ▪ Aventura, Florida 33160 ▪ U.S.A. Tel: 305-406-0211 ▪ Toll Free: 1-855-oscillator ▪ Fax: 305-647-2169 ▪ sales@rubyquartz.com ▪ http://www.rubyquartz.com RQRA CRO VCO SERIES Page 2 of 4 RQRA-1500-LPH MECHANICAL DIMENSIONS AND PIN FUNCTIONING H= 0.236 6.0 ◼ H Tolerance: ±0.020in ±0.51mm Marking: RQRA 1500-LPH Date code RUBYQUARTZ, LLC ▪ 18205 Biscayne Blvd Suite 2217 ▪ Aventura, Florida 33160 ▪ U.S.A. Tel: 305-406-0211 ▪ Toll Free: 1-855-oscillator ▪ Fax: 305-647-2169 ▪ sales@rubyquartz.com ▪ http://www.rubyquartz.com RQRA CRO VCO SERIES Page 3 of 4 RQRA-1500-LPH PHASE NOISE PARAMETER SSB Phase noise SYMBOL CONDITION VALUE Min Typ Max f=1.0kHz -95 f=10.0kHz -120 f=100kHz -140 f=1.0MHz -155 f=10.0MHz -155 f=20.0MHz -156 (f) UNIT dBc/Hz COMMON SPECIFICATIONS 1.1 -Load impedance is 50 Ohms. 1.2 -Pulling is measured with 12dB return loss, all phases. 1.3- Package outline tolerances are typ. ±0.30mm / ±0.012 inch if not stated differently on the drawing. 1.4 -It is recommended to provide two bypass-capacitors (ceramic), from Vcc to Gnd, 1nF || 100pF. 1.5- Solder temperature (peak) is 260°C for 10-20s. Environmental Compliance PARAMETER CONDITIONS Mechanical Shock MIL-STD-883, Method 2002 Mechanical Vibration MIL-STD-883, Method 2007 Solderability MIL-STD-883, Method 2003 Resistance to Solvents MIL-STD-883, Method 2016 RUBYQUARTZ, LLC ▪ 18205 Biscayne Blvd Suite 2217 ▪ Aventura, Florida 33160 ▪ U.S.A. Tel: 305-406-0211 ▪ Toll Free: 1-855-oscillator ▪ Fax: 305-647-2169 ▪ sales@rubyquartz.com ▪ http://www.rubyquartz.com RQRA CRO VCO SERIES Page 4 of 4 RQRA-1500-LPH REFLOW PROFILE tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [°C] TSMIN Ramp-down tS Preheat t[25°C] to Peak Time [sec] Recommended Solder Reflow Profile TSMIN TSMAX tS TL TP RUP RDOWN tP t[25°C] to Peak tL Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5°C of Peak Temperature Time t[25°C] to Peak Temperature Time 150°C 175°C 60-180 sec. 217°C 260°C 3°C/sec max. 6°C/sec max. 10-20 sec max. 480 sec. 60-150 sec. APPROVALS Eng. approval, date: IM 01/21/2019 Created by, date: 01/21/2019 AR Revision: A RUBYQUARTZ, LLC ▪ 18205 Biscayne Blvd Suite 2217 ▪ Aventura, Florida 33160 ▪ U.S.A. Tel: 305-406-0211 ▪ Toll Free: 1-855-oscillator ▪ Fax: 305-647-2169 ▪ sales@rubyquartz.com ▪ http://www.rubyquartz.com