RAC60-24S/OF

!NOT RECOMMENDED FOR NEW DESIGNS! • Class II power supply Features • Universal input voltage range (LAST TIME BUY: 30TH OCT 2020) AC/DC Converter • Compact 4“ x 2“ size • 3kVAC Isolation • OCP, OVP, SCP • Standby power ErP conform (450 x 103 hours +25°C 40 50 60 70 80 0 90 100 110 Ambient Temperature [°C] 264 Input Voltage [VAC] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number E196683 Information Technology Equipment, General Requirements for Safety EAC Safety of Low Voltage Equipment 11037315 001 EN60950-1:2006 + A2:2013 IEC60950-1:2005 2nd Edition + A2:2013 RU-AT.49.09571 TP TC 004/2011 RoHS2 EMC Compliance (8) RoHS-2011/65/EU + AM-2015/863 Condition Electromagnetic compatibility of multimedia equipment – Emission Requirements Radiated, Radio-Frequency, Electromagnetic Field Immunity Test Fast Transient and Burst Immunity Surge Immunity Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields Power Magnetic Field Immunity Voltage Dips and Interruption EN55024 air ±2.0, 4.0, 8.0kV contact ±2.0,4.0kV 3V/m IEC61000-4-2:2008; Criteria A IEC61000-4-3:2006 + A2:2010; Criteria A AC Power Port: ±1.0kV IEC61000-4-4:2012; Criteria A AC Power Port: L-N ±0.5, 1.0kV L-PE, N-PE ±0.5, 1, 2.0kV IEC61000-4-5:2014; Criteria A AC Power Port 3.0V IEC61000-4-6:2013; Criteria A 50Hz, 1A/m IEC61000-4-8:2009; Criteria A Voltage Dips > 95% Voltage Dips > 30% Voltage Interruptions > 95% IEC61000-4-11:2004; Criteria A IEC61000-4-11:2004; Criteria B IEC61000-4-11:2004; Criteria B Limits of Harmonic Current Emissions EN61000-3-2:2014, Class A Limits of Voltage Fluctuations & Flicker EN61000-3-3:2013 Limitations on the amount of electromagnetic interference allowed from digital and electronic devices www.recom-power.com Standard / Criterion EN55032; Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement ESD Electrostatic Discharge Immunity Test Standard CAN/CSA-C22.2 No. 60950-1 UL No. 60950-1 47 CFR FCC Part 15 Subpart B 2010-01-07, Class B REV.: 8/2020 PA-3 ! NOT RECOMMENDED FOR NEW DESIGNS ! (LAST TIME BUY: 30TH OCT 2020) RAC60/OF AC/DC Converter Series Specifications (measured @ Ta= 25°C, nom. Vin = 230VAC) DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Dimension (LxWxH) 101.6 x 50.8 x 30.0mm Weight 145.0g typ. Dimension Drawing (mm) 101.6 3.175 95.3 Power LED Trim 44.5 50.8 2 1 CN2 CN1 3.17 A 1 2 3 4 B F.G. F.G. 4 x Ø3.3 30.0 AC Input Connector (CN1) Pin# Terminal Mating Housing 1 AC/N 2 AC/L WST I39606PS-2 or equivalent WST P3-I39606 or equivalent DC Output Connector (CN2) Pin# Terminal Mating Housing 1,2 V+ 3,4 V- WST I39606PS-2 or equivalent WST P4-I39606 or equivalent Detail information about the connectors on www.wst.com.tw Notes: Note9: Mounting holes A,B must be grounded for EMI (Filter Ground) PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) carton 325.0 x 270.0 x 220.0mm Packaging Quantity 30pcs Storage Temperature Range Storage Humidity -40°C to +80°C non-condensing 10% - 90% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 8/2020 PA-4