1N5407

1N5400 THRU 1N5408 SILICON RECTIFIER VOLTAGE RANGE 1000 Volts CURRENT 3.0 Ampere FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability DO-201AD MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight:1.2 grams .052 (1.3) .954 (24) .048 (1.2) DIA. MIN. .375 (9.5) .335 (8.5) .220 (5.6) .197 (5.0) DIA. .954 (24) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN. Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RATINGS 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 1000 Maximum RMS Voltage VRMS 700 Volts VDC 1000 Volts IO 3.0 Amps I FSM 200 Amps Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T L = 105 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 3) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range 2 IT 166 R Q JA 20 R Q JL 5.0 Volts 2 AS 0 CJ 30 T J, T STG -55 to + 150 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted) O CHARACTERISTICS Maximum Instantaneous Forward Voltage at 3.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 1 5 0 o C SYMBOL 1N5400 VF IR NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 2. Typical Thermal Resistance : At 9.5mm lead lengths,PCB mounted. 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 UNITS 1.0 Volts 0.2 uAmps 200 2020-04 REV:H INSTANTANEOUS REVERSE CURRENT, (uA) RATINGANDCHARACTERISTICSCURVES(1N5400 THRU 1N5408 ) AVERAGE FORWARD CURRENT, (A) 5.0 4.0 3.0 2.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 1.0 0 0 50 25 75 100 125 150 175 1000 100 TA = 1 5 0OC 1.0 0.1 TA = 25 OC 0.01 0 O PEAK FORWARD SURGE CURRENT, (A) 20 10 O TJ = 25 C 3.0 1.0 0.3 0.1 0.03 0.01 Pulse Width=300uS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 40 60 2.5 3.0 3.5 100 120 140 FIG.2 MAXIMUM REVERSE CHARACTERISTICS 200 8.3ms Single Half Sine-Wave (JEDED Method) 100 50 30 20 10 5 1 INSTANTANEOUS FORWARD VOLTAGE, (V) 10 TJ = 25 OC 100 60 40 20 10 6 4 2 0.2 100 FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 0.1 50 NUMBER OF CYCLES AT 60Hz FIG.3 MAXIMUM INSTANTANEOUS FORWARD CHARACTERISTICS 1 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE, ( C) 20 0.4 1.0 4.0 10 20 40 100 REVERSE VOLTAGE, (V) FIG.5 TYPICAL JUNCTION CAPACITANCE Marking Description Plant - code Rectron Logo Part No. V X X 1 N 5 4 0H Cathode Band Year – code (Y: Last digit of year & A:2010, B:2011…..) Month – code (M: 0~9, O, N, D) H---for all Voltage rang PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-201 -B EA PER BOX INNER BOX SIZE (mm) 500 300*73*40 CARTON SIZE EA PER CARTON (mm) 347*320*271 12,000 GROSS WEIGHT(Kg) 15.9 REEL PACK PACKAGE DO-201 PACKING EA PER EA PER COMPONENT TAPE SPACE REEL DIA CARTON SIZE EA PER GROSS SPACE INNER REEL CARTON WEIGHT(Kg) CODE (mm) (mm) (mm) (mm) BOX -T 1,200 1,200 5.0 52 330 355*350*335 4,800 9.10 AMMO PACK PACKAGE PACKING CODE DO-201 -F REEL ( EA ) 600 COMPONENT TAPE SPACE SPACE(mm) (mm) 9.5 52 BOX SIZE (mm) CARTON SIZE(mm) 255*73*100 400*268*225 CARTON ( EA ) 6,000 GROSS WEIGHT (Kg) 9.9 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.