CMBD1205

SMALL SIGNAL DIODE C MBD1201 T HUE CMDB1205 VOLTAGE RANGE 75 Volts CURRENT 215 mAmpere * FEATURES * * * * * Compact surface mount with same foot print as mini-melf High Breakdown Voltage Fast Switching Speed 400mW Power Dissipation General Purpose Switching Applications High Conductance 0.055(1.40) 0.047(1.20) SOT-23 MECHANICAL DATA * * * * * 0.006(0.14) 0.004(0.09) 0.028(0.70) 0.020(0.50) 0.046(1.15) 0.035(0.90) 0.005(0.12) 0.001(0.02) Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.01 gram 0.019(0.48) 0.015(0.38) 0.102(2.60) 0.094(2.40) 0.079(2.00) 0.071(1.80) 1 3 0.110(2.80) 2 0.118(3.00) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ T A=25 OC unless otherwise noted) RATINGS Non-Repetitive Peak Reverse Voltage Maximum R epetitive Peak Reverse Voltage Maximum Working Peak reverse Voltage Maximum DC Blocking Voltage Maximum RMS Voltage Maximum Forward Comtinuous Current Maximum Average Forward Rectified Current Non-Repetitive Peak Forward Surge Current Typical Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance Operating and Storage Temperature Range O SYMBOL VRM VRRM VRWM VR VRMS IFM IO @t=1.0uS @t=1.0mS @t=1.0S CMBD1201/1202/1203/1204/1205 100 75 53 500 215 4.0 1.0 0.5 4 2 500 -65 to + 150 UNITS Volts Volts Volts mAmps mAmps Amps nS pF K/W O C UNITS Volts nAmps uAmps IFSM Trr CT R qJA TJ, TSTG ELECTRICAL CHARACTERISTICS (@T =25 C unless otherwise noted) A SYMBOL CHARACTERISTICS Maximum Instantaneous Forward Voltage @IF=10mA @IF=200mA @VR=20V @VR=75V o @VR=25V,Tj=150 C CMBD1201/1202/1203/1204/1205 0.855 1.05 25 5 30 VF Maximum Instantaneous Reverse Current . IR VD 2008-8 REV: O RATING AND CHARACTERISTICS CURVES ( CMBD1201 THUE CMBD1205 ) IF, INSTANTANEOUS FORWARD CURRENT(mA) 500 PD, POWER DISSIPATION (mW) 400 300 200 100 0 1000 100 10 1.0 0.1 .01 0 25 50 75 100 125 O 150 175 0 1 VF, INSTANTANEOUS FORWARD VOLTAGE(V) 2 TA, AMBIENT TEMPERATURE( C) FIG.1 FORWARD DERATING CURVE 10,000 IR, LEAKAGE CURRENT (nA) FIG.2 FORWARD CHARACTERISTICS 1,000 100 10 1 0 100 TJ, JUNCTION TEMPERATURE( C) O 180 FIG.3 LEAKAGE CURRENT VS. JUNCTION TEMPERATURE R ECTRON Marking CMBD1201 – 24 CMBD1202 – 25 CMBD1203 – 26 2 1 CMBD1204 – 27 CMBD1205 – 28 PACKAGE OUTLINE DETAILS ALL DIMENSIONS IN Inches and (millimeters) CMBD1201 3 Single Diode 0.055(1.40) 0.047(1.20) 1 2 3 0.006(0.14) 0.004(0.09) 0.028(0.70) 0.020(0.50) CMBD1202 Single Diode 0.046(1.15) 0.035(0.90) 0.005(0.12) 0.001(0.02) 2 1 CMBD1203 3 Dual diodes in Series 0.019(0.48) 1 0.102(2.60) 0.094(2.40) 2 0.015(0.38) CMBD1204 3 Common Cathode 0.019(2.00) 0.071(1.80) 1 0.118(3.00) 3 0.110(2.80) 2 1 2 CMBD1205 3 Common Anode SOT-23 CASE DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.