BU94705KV

1/5 ◇Structure ◇Product name ◇Type ◇Applications ◇Functions Silicon Monolithic integrated circuit USB host + MP3 Encoder + WAV/AAC/WMA/MP3 Decoder LSI BU94705KV Audio products, etc. BU94705KV is MP3 encoder + WAV/AAC/WMA/MP3 decoder IC which contains program download function from external serial Flash ROM and contains USB host, SD card I/F, CD-ROM I/F, audio DAC, system controller, regulator for internal CORE power supply. USB2.0 Full Speed host I/F function contained. SD card I/F function contained. 2 I C format I/F function contained. MP3 encode function contained. (available for MPEG1, Layer3, support up to 2X input speed) MP3 decode function contained. (available for MPEG1, 2 and 2.5, Layer 1, 2 and 3) WMA decode function contained. (available for WMA9 standard and not available for DRM) AAC decode function contained. (available for MPEG4 AAC-LC and not available for DRM) WAV format file playing function contained. Sample Rate Converter contained. System Controller contained. FAT analysis function contained. CD-ROM I/F function and CD-ROM decode function contained. Browsing function of other File Names, Folder Names on music playing contained. ID3TAG and WMATAG and AACTAG Analysis. Fast forward playing and fast backward playing function contained. External processor can control. Resume function contained. Audio DAC contained. Sound Effect function contained. 2 Digital Audio Out(I S, EIAJ, S/PDIF) function contained. 2 Digital Audio Input(I S, EIAJ) function contained. Program download function from external serial Flash ROM contained. Regulator for internal CORE power supply contained. VQFP80pin(0.5mm pitch) ◇Absolute maximum ratings (Ta = 25〬C) Parameter Symbol Supply voltage(Analog, I/O) VDD1MAX Limits -0.3～4.5 Unit Ｖ Comment DVDDIO, VDD_PLL, DAVDD, AVDDC Input voltage VIN -0.3 ～ VDD1 + 0.3 Ｖ Storage temperature range TSTG -55～125 ℃ Operating temperature range TOPR -40～85 ℃ Power dissipation *1 PD 900 ｍＷ *1：In the case of use at Ta=25℃ or more, 9mW should be reduced per 1℃. Radiation resistance design is not arranged. ◇Operating conditions (Ta = 25℃) Parameter Symbol Limits Unit 3.0～3.6 Ｖ Supply voltage(Analog, I/O) VDD1 Comment DVDDIO,VDD_PLL, DAVDD, AVDDC REV. A 2/5 ◇Electrical characteristics （Unless specified, Ta=25℃、VDD1=3.3V, DVSS=AVSSC=VSS_PLL=DAVSS=0V, XIN_PLL=16.9344MHz） Limits Parameter Symbol Unit Condition MIN. TYP. MAX. 60 90 Circuit current (VDD1 USB1) IDD1USB1 mA *1 When USB memory is played. Circuit current (VDD1 SD1) IDD1SD1 35 60 mA *1 When SD card is played. H-Level input voltage VIH VDD1*0.7 － VDD1 V *3 L-Level input voltage VIL DVSS － VDD1*0.3 V *3 H-Level output voltage1 VOH1 VDD1-0.4 － VDD1 V IOH=-1.6mA, *4 L-Level output voltage1 VOL1 0 － 0.4 V IOL=1.6mA. *4 L-Level output voltage2 VOL2 0 － 0.4 V IOL=3.6mA, *5 H-Level output voltage3 VOH3 VDD1-0.4 － VDD1 V IOH=-0.6mA, *6 L-Level output voltage3 VOL3 0 － 0.4 V IOL=0.6mA, *6 H-Level output voltage4 VOH4 VDD1-1.0 － VDD1 V IOH=-0.6mA, *7 L-Level output voltage4 VOL4 0 － 1.0 V IOL=0.6mA, *7 H-Level input voltage VIHUSB VDD1*0.6 － VDD1 V *8 L-Level input voltage VILUSB AVSSC － VDD1*0.3 V *8 Output impedance(H) ZOH 22.0 45.0 60.0 Ω *8 Output impedance(L) ZOL 22.0 45.0 60.0 Ω *8 H-Level output voltage VOHUSB VDD1-0.5 － VDD1 V *8 L-Level output voltage VOLUSB 0 － 0.3 V *8 Rise/Fall time Tr/Tf － 11 － ns *8, Output capacity 50pF Voltage of crossing point VCRS － VDD1/2 － V *8, Output capacity 50pF Range of differential input VDIFF 0.8 － 2.5 V *8 Differential input sensitivity VSENS 0.2 － － V *8 Pull-down resistance RPD 14.25 20.0 24.8 kΩ *8 Distortion rate THD － 0.005 － % 1kHz, 0dB, sine, *9 Dynamic range DR － 90 － dB 1kHz, -60dB, sine, *9 S/N ratio S/N － 95 － dB *9 Max output level VSMAX － 0.67 － Vrms 1kHz, 0dB, sine, *9 *1 3.3V system I/O, Analog Power supply(VDD1), 1kHz, 0dB, sine-wave playing *3 1, 3, 4-9, 14-23, 29, 31-32, 34-35, 61-63, 71-76 pin *4 9, 11-12, 14-15, 18-20, 30, 36, 58-60, 61-67, 69-70 pin *5 2, 3, 17 pin *6 24-26, 28, 29 pin *7 49 pin *8 41, 42 pin *9 53, 55 pin REV. A 3/5 ◇Description of Terminals No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Name RESETX TEST15 TEST16 SEL_SLAVE SEL_MP3/INREQI SEL_DOUT/LRCKI SEL_VOL/BCKI SEL_APLAY/SDATAI SEL_UTPKT/BFULLO DVSS IRPTO SEARCH DVDDIO KEY_ROW1/MCHNG KEY_ROW2/BUSY KEY_ROW3/SCL KEY_ROW4/SDA KEY_COL1/A0 KEY_COL2/A1 KEY_COL3/SEL_I2C SD_WP SD_CON SD_DO SD_CLK SD_DI SD_CS DVSS FL_CS TEST/CLK12MO TEST5 TEST6 TEST7 DVDDIO TEST8 TEST9 TEST10 DVSS DVDD_M2 ATEST1 AVDDC USB_DM USB_DP AVSSC REXTI VOREFI VSS_PLL TEST_PLL1 XIN_PLL XOUT_PLL TEST_PLL2 VDD_PLL DAVSS RDACO VCDACO LDACO DAVDD DVSS AMUTE TEST11 I/O － O O － I/O I/O I I/O O/I O/I O/I I I I O O O － O I/O O I I － I I O － － O － I/O I/O － O O － I I O O － － O O O － － O O I/O I O O I I I I I Description of terminals System reset terminal [TEST15]Pull-up at 2.2k ohm to VDD1 system power supply terminal(TEST PIN) [TEST16]Pull-up at 2.2k ohm to VDD1 system power supply terminal(TEST PIN) Slave mode selection（H：Stand Alone mode, L：Slave mode） [SEL_MP3]MPEG Audio Layer selection（H：Only MP3, L：MP1, MP2 and MP3 can be playback）, [INREQI]Input data valid [SEL_DOUT]Digital Audio out selection（H：Disable、L：Enable）, [LRCKI]Digital Audio channel clock input terminal [SEL_VOL] Volume operation selection（H：Volume+- Effective, L：VOL+-Inavalidity）, [BCKI]Digital Audio bit clock input terminal [SEL_APLAY] At device(USB,SD) connection, Auto Play mode selection(H:It stop, L:It playback), [SDATAI]Digital Audio data input terminal [SEL_UTPKT] USB test packet output selection（H：Normal、L：Test packet）,[BFULLO]Input buffer FULL flag output terminal GND terminal To HOST interruption output terminal Search flag terminal IO Power supply(VDD1) terminal [KEY_ROW1]KEY Matrix terminal, [MCHNG]Music change flag terminal [KEY_ROW2]KEY Matrix terminal, [BUSY]Busy flag terminal [KEY_ROW3]KEY Matrix terminal, [SCL]I2C slave clock I/F input terminal [KEY_ROW4]KEY Matrix terminal, [SDA]I2C slave data I/F terminal [KEY_COL1]KEY Matrix terminal, [A0]I2C slave address selection [KEY_COL2]KEY Matrix terminal, [A1]I2C slave address selection [KEY_COL3]KEY Matrix terminal, [SEL_I2C]Pull-up to VDD1 system power supply terminal SD card Write Protect terminal SD card Connect terminal SD card Data In terminal SD card Clock terminal SD card Data Out terminal SD card Chip select terminal GND terminal Serial FLASH ROM Chip select terminal [TEST] Pull-up to VDD1 system power supply terminal(TEST PIN), [CLK12MO]12MHz clock output terminal [TEST5]OPEN (TEST PIN) [TEST6]Pull-up to VDD1 system power supply terminal(TEST PIN) [TEST7]Pull-up to VDD1 system power supply terminal(TEST PIN) IO Power supply(VDD1) terminal [TEST8]Pull-up to VDD1 system power supply terminal(TEST PIN) [TEST9]Pull-up to VDD1 system power supply terminal(TEST PIN) OPEN (TEST PIN, IPL ERROR Flag output) GND terminal CORE Power supply(VDD2) monitor terminal. Connect to DVDD_M1 pin. USB TEST terminal(TEST PIN), OPEN USB Power supply(VDD1)terminal USB D－I/O terminal USB D+ I/Oterminal USB GND terminal USB bias resistor(12kΩ) connecting terminal USB TEST terminal(TEST PIN), OPEN PLL GND terminal PLL TEST terminal(TEST PIN), OPEN X'tal(16.9344MHz) connecting input terminal X'tal(16.9344MHz) connecting output terminal PLL TEST terminal(TEST PIN), Pull-up to VDD1 system power supply terminal PLL Power supply(VDD1) terminal Audio DAC GND terminal Audio DAC Rch Line output terminal Audio DAC Reference voltage output teminal Audio DAC Lch Line output terminal Audio DAC Power supply(VDD1) terminal GND terminal Audio Mute output terminal（H：MUTE OFF, L：MUTE ON） OPEN (TEST PIN) REV. A 4/5 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 TEST12/MCLK LED_ERROR/ SS_CS LED_PLAY/SS_DI LED_PSD/SS_CLK LED_PUSB/SS_DO LED_ACCESS/LRCKO LED_RANDOM/BCKO LED_REPEAT/SDATAO DVDDIO TEST13 TEST14 SEL_USB TEST4 TEST3 TEST2 TEST1 TMODE DVSS DVDD_M1 DVDDIO TEST0 O O/I O/I O/I O O O O － O O I I I I I I － － － I [TEST12] OPEN (TEST PIN), [MCLK] Digital Audio master clock (16.9344MHz) output terminal [LED]Lighting output terminal at ERROR, [SS_CS] Slave SIO Chip select In terminal [LED]Lighting output terminal at PLAY, [SS_DI] Slave SIO Data In terminal [LED]Lighting output terminal at PLAY for SD card, [SS_CLK] Slave SIO Clock In terminal [LED]Lighting output terminal at PLAY for USB memory, [SS_DO] Slave SIO Data Out terminal [LED]Lighting output terminal when memory is being accessed,[LRCKO]Digital Audio channel clock or SPDIF output terminal [LED]Lighting output terminal at PLAY for RANDOM, [BCKO]Digital Audio bit clock output terminal [LED]Lighting output terminal at PLAY for REPEAT, [SDATAO]Digital Audio data output terminal IO Power supply(VDD1) terminal OPEN (TEST PIN) OPEN (TEST PIN) At device(USB,SD) connection, 1st device detection selection(H:USB, L:SD) Pull-up to VDD1 system power supply terminal(TEST PIN) Pull-up to VDD1 system power supply terminal(TEST PIN, L: IPL WRITE MODE1) Pull-up to VDD1 system power supply terminal(TEST PIN, L: IPL WRITE MODE2) Pull-up to VDD1 system power supply terminal(TEST PIN) Connect to GND(TEST PIN) GND terminal CORE Power supply(VDD2) monitor terminal, Connect to bypass condenser IO Power supply(VDD1) terminal Connect to GND(TEST PIN) ◇External dimensions・Block diagram 14.0±0.2 12.0±0.1 60 41 61 40 14.0±0.2 12.0±0.1 BU94705KV 1.25 80 21 1 20 1 PIN mark 1.25 0.145 -0.03 +0.05 S 1.6MAX 4゜ -4゜ Unit : mm +6゜ 1.4±0.05 0.1±0.05 0.5±0.1 0.2 +0.05 -0.04 0.08 0.08 M S PKG: VQFP80 Drawing No. EX253-5001-2 Figure 1. External dimention 1.0±0.2 Lot No. 0.5±0.15 Figure 2. Block diagram REV. A 5/5 Caution (1) Power on Reset Please keep the terminal RESETX at the Low level when the power supply starts. After completely starting up 3.3V system power supply , afterwards, please make the terminal RESETX High level after 100us after the oscillation of the system clock is steady. Moreover, please make the terminal RESETX Low level during 100us or more when resetting it while operating.. (2) About compatibility in USB memory device and SD memory card According to the file structure and communication speed of an USB memory, SD memory card, this LSI might not play back correctly. (3) About turning on the power supply Current rush might flow momentarily by the order of turning on the power supply and the delay in IC with two or more power supplies, and note the capacity of the power supply coupling, the power supply, and width and drawing the GND pattern wiring. (4) About absolute maximum rating When the absolute maximum rating such as the applied voltage and the ranges of the operating temperature is exceeded, LSI might be destroyed. Please apply neither voltage nor the temperature that exceeds the absolute maximum rating. Please execute physical measures for safety such as fuse when it is thought to exceed the absolute maximum rating, and examine it so that the condition to exceed the absolute maximum rating is not applied to LSI. (5) About GND Voltage In any state of operation must be the lowest voltage about the voltage of the terminal GND. Please actually confirm the voltage of each terminal is not a voltage that is lower than the terminal GND including excessive phenomenon. (6) About design of overheating malfunction preventive circuit Please design overheating malfunction preventive circuit with an enough margin in consideration of a permissible loss in the state of using actually. (7) About the short between terminals and the mounting by mistake Please note the direction and the gap of position of LSI enough about LSI when you mount on the substrate. LSI might be destroyed when mounting by mistake and energizing. Moreover, LSI might be destroyed when short-circuited by entering of the foreign substances between the terminal and GND, between terminals, between the terminal and the power supply of LSI. (8) About operation in strong electromagnetic field Use in strong electromagnetic field has the possibility of malfunctioning and evaluate it enough, please. (9) About 2X speed recording Recording to a memory with slow access speed may require data connection operation. 2X speed recording to all the memories cannot be guaranteed. (10) Power off or memory disconnection under memory writing The sudden power off or memory disconnection during recording or file write operation to a memory may break the data in a memory. (11) Browsing operation With a memory with slow access speed, Browsing operation during music playing may generate skipping. (12) CD-ROM playing CD-ROM playing operation is premised on data being inputted so that an internal data buffer may not become empty. When an input does not meet the deadline and internal data buffers become empty, skipping occurs. (13) Playing time of MP3 file The playing time of an MP3 file may shift when fast forward playing, rewinding playing, and VBR playing. (14) Write-in operation exceeding memory size When memory size is exceeded, IC will stop writing to a file and will be in an error condition. (15) Write-in operation of the file size exceeding FAT specification When file size is exceeded, IC will stop writing to a file and will be in an error condition. (16) About WMA Windows Media Audio is the music compression technology which Microsoft Corp. developed. Windows Media is the registered trademark of U.S. Microsoft Corporation in the U.S., and other countries. (17) About I2C format I/F Although this LSI has adopted the I2C format, the level shifter circuit is not built in. For this reason, level shifter is needed for connection with the device besides the range of operating power supply voltage of this LSI. REV. A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A