LM339MX

General-purpose Operational Amplifiers / Comparators NOW SERIES Comparators LM393MX,LM2903MX,LM339MX,LM2901MX No.11094ECT06 ●Description The Universal Standard family LM393 / LM339 / LM2903 / LM2901 monolithic ICs integrate two / four independent comparators on a single chip and feature high gain, low power consumption, and an operating voltage range from 2[V] to 36[V] (single power supply). NOW SERIES Dual LM393 family LM393MX Quad LM339 family LM339MX LM2903 family LM2903MX LM2901 family LM2901MX ●Features 1) Operating temperature range Commercial Grade LM339/393 family: 0[℃] to +70[℃] Extended Industrial Grade LM2903/2901 family: -40[℃] to +85[℃] 2) Open collector output 3) Single / dual power supply compatible 4) Low supply current 0.8[mA] typ.(LM2901/339 family) 0.4[mA] typ.(LM2903/393 family) 5) Low input-bias current: 25[nA] typ. 16) Low input-offset current: 5[nA] typ. 7) Input common-mode voltage range, including ground 8) Differential input voltage range equal to maximum rated supply voltage 9) Low output saturation voltage 10) TTL,MOS,CMOS compatible output ●Pin Assignment OUTPUT2 1 14 OUTPUT3 OUTPUT A INVERTING INPUT A NON-INVERTING INPUT A GND 1 8 V+ OUTPUT1 2 13 OUTPUT4 2 －＋ 7 OUTPUT B INVERTING INPUT B NON-INVERTING INPUT B V+ 3 － ＋ － ＋ 12 GND INPUT1 - 4 11 INPUT4 + 3 ＋－ 6 INPUT1 + 5 10 INPUT4 - INPUT2 - 6 － ＋ － ＋ 9 INPUT3 + 4 5 INPUT2 + 7 8 INPUT3 - S.O package8 LM393MX LM2903MX S.O package14 LM339MX LM2901MX www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 1/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating LM393 family LM339 family +36 LM2903 family Technical Note LM2901 family Unit Supply Voltage V+-GND V Input Differential Voltage Vid ±36 V Common-mode Input Voltage Vicm -0.3 to +36 -40 to +85 -65 to +150 V Operating Temperature Range Topr 0 to +70 ℃ Storage Temperature Range Tstg ℃ Maximum Junction Temperature Tjmax +150 ℃ ●Electric Characteristics ○LM393/339 Family(Unless otherwise specified, V+=+5[V]) Limits Parameter Symbol Temperature range Min. Input Offset Voltage (*1) VIO 25℃ Full range 25℃ Full range 25℃ Full range 25℃ Full range 25℃ － － － － － － 0 0 － － 25 LM393 family Typ. 1 － 25 － 5 － － － 0.4 1 200 Max. 7 9 250 400 50 150 V+-1.5 V+-2.0 1 2.5 － Min. － － － － － － － － － － 25 LM339 family Typ. 2 － 25 － 5 － － － 0.8 1.0 100 Max. 7 15 250 400 50 150 V+-1.5 V+-2.0 2.0 2.5 － mV V+=5 to 30[V],VO=1.4[V], RS=0[Ω] VCM=0[V] to V+-1.5[V] IIN(+) or IIN(-) VCM=0[V] IIN(+)-IIN(-),VCM=0[V] 88 Unit Condition Fig.No Input Bias Voltage (*1) IIB nA 88 Input Offset Current (*1) Input Common-mode Voltage Range Supply Current IIO nA 88 VICR V V+=30[V] RL=∞,V+=5[V] RL=∞,V+=36[V] V+=15[V],VO=1[V] to 11[V] RL≧15[kΩ] VIN=TTL logic swing, Vref=1.4[V] VRL=5[V],RL=5.1[kΩ] VRL=5[V],RL=5.1[kΩ] VIN=100[mVp-p] overdrive=5[mV] VIN(-)=1[V],VIN(+)=0[V] VO≦1.5[V] VIN(-)=1[V],VIN(+)=0[V] ISINK≦4[mA] VIN(-)=0[V],VIN(+)=1[V], VO=5[V] ALL VIN≧0[V] 88 ICC mA 89 Large Signal Voltage Gain Large Signal Response Time Response Time AVD 25℃ V/mV 88 tREL tRE 25℃ 25℃ － 1.5 300 － － － 300 1.3 － － ns μs 89 89 Output Sink Current ISINK 25℃ 25℃ Full range 25℃ Full range Full range 6 － － － 16 250 － 0.1 － 400 700 － 6 － － － － 16 250 － 0.1 － － － 400 700 － 1.0 36 mA 89 Output Saturation Voltage VOL mV nA μA V 89 Output Leakage Current IOH 89 Differential Input Voltage (*1) Absolute value VID － － 36 － － www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 2/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ○LM2903/2901 family(Unless otherwise specified, V+=+5[V]) Limit Parameter Symbol Temperature range Min. Input Offset Voltage (*2) VIO 25℃ Full range 25℃ Full range 25℃ Full range 25℃ Full range － － － － － － － － － Supply Current ICC 25℃ － 1 2.5 － 1 2.5 LM2903 family Typ. 2 9 25 200 5 50 － － 0.4 Max. 7 15 250 500 50 200 V+-1.5 V+-2.0 1 Min. － － － － － － － － － LM2901 family Typ. 2 9 25 200 5 50 － － 0.8 Max. 7 15 250 500 50 200 V+-1.5 V+-2.0 2 mA mV Unit Technical Note Condition Fig.N o. V+=30[V],VO=1.4[V], RS=0[Ω] VCM=0[V] to V+-1.5[V] IIN(+) or IIN(-) VCM=0[V] IIN(+)-IIN(-),VCM=0[V] 88 Input Bias Current (*2) IIB nA 88 Input Offset Current (*2) Input Common-mode Voltage Range IIO nA 88 VICR V V+=30[V] 88 RL=∞,V+=5[V] 89 RL=∞,V+=36[V] V+=15[V],VO=1[V] 11[V], RL≧15[kΩ] VIN=TTL logic swing, Vref=1.4[V] VRL=5[V],RL=5.1[kΩ] VRL=5[V],RL=5.1[kΩ] VIN=100[mVp-p], overdrive=5[mV] VIN(-)=1[V],VIN(+)=0[V] VO≦1.5[V] VIN(-)=1[V],VIN(+)=0[V] ISINK≦4[mA] VIN(-)=0[V],VIN(+)=1[V], VO=5[V] VIN(-)=0[V],VIN(+)=1[V], VO=30[V] ALL VIN≧0[V] to 88 Voltage Gain Large Signal Response Time Response Time AVD 25℃ 25 100 － 25 100 － V/mV tREL 25℃ － 300 － － 300 － ns 89 tRE 25℃ － 1.5 － － 1.3 － μs 89 Output Sink Current ISINK 25℃ 25℃ Full range 25℃ 6 － － － － － 16 250 400 0.1 － － － 400 700 － 1 36 6 － － － － － 16 250 － 0.1 － － － 400 700 － 1 36 mA 89 Saturation Voltage VOL mV nA μA V 89 Output Leakage Current Ileak Full range 89 Differential Input Voltage (*2) Absolute value VID Full range － www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 3/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM393 family 1000 POWER DISSIPATION [mW] . LM 393 family Technical Note 1 　. 0℃ LM 393 family 1 LM 393 family SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 0.8 25℃ 0.8 36V 600 LM393MX 0.6 0.6 400 0.4 70℃ 0.4 2V 200 0.2 0.2 5V 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] . 70 0 0 0 10 20 30 SUPPLY VOLTAGE [V] 40 125 0 10 20 30 40 50 60 70 AMBIENT TEMPER ATURE [℃] 80 Fig.1 Derating Curve 500 OUTPUT SATURATION VOLTAGE [mV] 70℃ LM 393 family Fig.2 Supply Current – Supply Voltage 500 OUTPUT SATURATIO N VOLTAGE [mV] LM 393 family Fig. 3 Supply Current – Ambient Temperature 2.0 LOW LEVEL OUTPUT VOLTAGE [V] 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 0℃ 70℃ 25℃ LM 393 family 400 400 2V 300 25℃ 300 5V 200 0℃ 200 36V 100 100 0 0 10 20 30 SUPPLY VOLTAGE [V] 40 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [ ℃] 80 10 12 14 16 18 20 OUTPUT SINK CURRENT [mA] Fig.4 Output Saturation Voltage – Supply Voltage (IOL=4[mA]) 40 OUTPUT SINK CURR ENT [mA] LM 393 family Fig. 5 Output Saturation Voltage – Ambient Temperature (IOL=4[mA]) 8 INPUT OFFSET VOLTAGE [mV] 6 4 2 0 -2 -4 -6 -8 70℃ 0℃ 25℃ LM 393 family Fig. 6 Low Level Output Voltage – Output Sink Current (VCC=5[V]) 8 INPUT OFFSET VOLTAGE [mV] 6 4 2 0 -2 -4 -6 -8 36V 2V 5V LM 393 family 30 36V 5V 20 10 2V 0 0 10 20 30 40 50 60 70 AMBIEN T TEMPERATURE [℃] 80 0 10 20 30 40 0 10 20 30 40 50 60 70 80 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 7 Output Sink Current – Ambient Temperature (VOUT=1.5[V]) 160 140 INPUT BIAS CURRENT [nA] LM 393 family Input Offset Voltage – Supply Voltage LM 393 family Fig. 8 Fig. 9 Input Offset Voltage – Ambient Temperature LM 393 family . 160 140 50 40 INPUT OFFSET CURRENT [nA] 30 20 10 0 -10 -20 -30 -40 -50 0℃ INPUT BIAS CURRENT [nA] 120 100 80 60 40 20 0 0 10 20 30 40 SUPPLY VOLTAGE [V] 70℃ 0℃ 25℃ 120 100 80 60 40 20 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [℃] 80 2V 5V 36V 25℃ 70℃ 0 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 10 Input Bias Current – Supply Voltage Fig. 11 Input Bias Current – Ambient Temperature Fig. 12 Input Offset Current – Supply Voltage (*)The data above is ability value of sample, it is not guaranteed. LM393family: 0[℃]~+70[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 4/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM393 family 40 IN PUT OFFSET CU RRENT [nA] 30 20 10 0 -10 -20 -30 -40 - 50 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [℃] 80 2V 5V 36V 25℃ Technical Note . 50 LM 393 family 140 130 120 110 100 90 80 70 60 0 70℃ 0℃ LM 393 family 140 130 36V LM 393 family LARGE SIGNAL VOLTAGE GAIN [dB] . LARGE SIGNAL VOLT AGE GAIN [dB] 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 2V 5V 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 13 Input Offset Current – Ambient Temperature POWER SUPPLY REJECTION RAT IO [dB] COMMON MODE REJECTION RATIO[dB] . 160 140 120 100 80 60 40 0 10 20 30 SUPPLY VOLTAGE [V] 40 LM 393 family Fig. 14 Large Signal Voltage Gain – Supply Voltage POWER SUPPLY REJECTION RATIO [dB] . Fig. 15 Large Signal Voltage Gain – Ambient Temperature 140 130 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERAT URE [°C] 80 LM 393 family 140 130 120 36V LM 393 family 0℃ 25℃ 110 100 90 80 70 60 0 10 2V 5V 70℃ 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 Fig. 16 Common Mode Rejection Ratio – Supply Voltage .. 5 LM 393 family Fig. 17 Common Mode Rejection Ratio – Ambient Temperature 5 RESPONSE TIME (HIGH to LOW) [μ ｓ] LM 393 family Fig. 18 Power Supply Rejection Ratio – Ambient Temperature RESPONSE T IME (LOW to HIGH) [μs] . 4 3 5mV overdrive 4 3 5mV overdrive 2 20mV overdrive 2 20mV overdrive 100mV overdrive 1 100mV overdrive 1 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 Fig. 19 Response Time (Low to High) – Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) Fig. 20 Response Time (High to Low) –Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) (*)The data above is ability value of sample, it is not guaranteed. LM393family:0[℃]~+70[℃] ℃]～+85[℃] *)上記のデータはサンプルの実力値であり、保証するものではありません。BA10393F:-40[ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 5/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM339 family 1000 POWER DISSIPATION [mW] . LM 339 family Technical Note 1 　. 0℃ LM 339 family 1 LM 339 family LM339MX SUPPLY CURRENT [mA] SUPPLY CURRENT [mA] 800 0.8 25℃ 0.8 36V 600 0.6 0.6 5V 400 0.4 70℃ 0.4 2V 200 0.2 0.2 0 0 25 50 70 0 0 75 100 125 0 AMBIENT TEMPERATURE [℃] . Fig.21 10 20 30 SUPPLY VOLTAGE [V] 40 0 10 20 30 40 50 60 70 AMBIENT TEMPER ATURE [℃] 80 Fig.22 Fig. 23 Supply Current – Ambient Temperature 2.0 LOW LEVEL OUTPUT VOLTAGE [V] LM 339 family Derating Curve 500 OUTPUT SATURATION VOLTAGE [mV] 70℃ LM 339 family Supply Current – Supply Voltage 500 OUTPUT SATU RATION VOLT AGE [mV] LM 339 family 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 0℃ 70℃ 25℃ 400 400 2V 300 25℃ 300 5V 200 0℃ 200 36V 100 100 0 0 10 20 30 SUPPLY VOLTAGE [V] 40 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [℃] 80 10 12 14 16 18 20 Fig.24 Output Saturation Voltage – Supply Voltage (IOL=4[mA]) 40 OUTPUT SINK CURR ENT [mA] LM 339 family Fig. 25 OUTPUT SINK CURRENT [mA] Fig. 26 Output Saturation Voltage – Ambient Temperature (IOL=4[mA]) 8 INPUT OFFSET VOLTAGE [mV] 6 4 0℃ LM 339 family Low Level Output Voltage – Output Sink Current (VCC=5[V]) 8 INPUT OFFSET VOLTAGE [mV] 6 4 2 0 -2 -4 -6 -8 36V 2V 5V LM 339 family 30 36V 2 0 -2 -4 -6 -8 70℃ 20 5V 25℃ 10 2V 0 0 10 20 30 40 50 60 70 AMBIEN T TEMPERATURE [℃] 80 0 10 20 30 40 0 10 20 30 40 50 60 70 80 SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃] Fig. 27 Output Sink Current – Ambient Temperature (VOUT=1.5[V]) 160 140 INPUT BIAS CURRENT [nA] LM 339 family Fig. 28 Input Offset Voltage – Supply Voltage 160 140 INPUT BIAS CURRENT [nA] 120 100 80 60 40 20 0 2V 5V 36V LM 339 family Fig. 29 Input Offset Voltage – Ambient Temperature 50 40 INPUT OFFSET CURRENT [nA] 30 20 10 0 -10 -20 -30 -40 -50 70℃ 25℃ 0℃ LM 339 family 120 100 80 60 40 20 0 0 10 20 30 40 SUPPLY VOLTAGE [V] 70℃ 0℃ 25℃ . 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [℃] 80 0 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 30 Fig. 31 Input Bias Current – Ambient Temperature Fig. 32 Input Offset Current – Supply Voltage Input Bias Current – Supply Voltage (*)The data above is ability value of sample, it is not guaranteed. LM339family:0[℃]~+70[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 6/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM339 family 40 IN PUT OFFSET CU RRENT [nA] 30 20 10 0 -10 -20 -30 -40 -50 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [℃] 80 2V 5V 36V Technical Note . 50 . LM 339 family 140 130 120 110 100 90 80 70 60 0 70℃ 0℃ 25℃ LM 339 family 140 130 36V LM 339 family LARGE SIGNAL VOLTAGE GAIN [dB] LARGE SIGNAL VOLT AGE GAIN [dB] 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 2V 5V 10 20 30 SUPPLY VOLTAGE [V] 40 Fig. 33 Input Offset Current – Ambient Temperature POWER SUPPLY REJECTION RAT IO [dB] COMMON MODE REJECTION RATIO[dB] . 160 140 120 100 80 60 40 0 10 20 30 SUPPLY VOLTAGE [V] 40 LM 339 family Fig. 34 Large Signal Voltage Gain – Supply Voltage . POWER SUPPLY REJECTION RATIO [dB] Fig. 35 Large Signal Voltage Gain – Ambient Temperature 140 130 120 110 100 90 80 70 60 0 10 20 30 40 50 60 70 AMBIENT TEMPERAT URE [°C] 80 LM 339 family 140 130 120 36V LM 339 family 0℃ 25℃ 110 100 90 80 70 60 0 10 2V 5V 70℃ 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 Fig. 36 Common Mode Rejection Ratio – Supply Voltage .. . Fig. 37 Common Mode Rejection Ratio – Ambient Temperature 5 RESPONSE TIME (HIGH to LOW) [μ ｓ] LM 339 family Fig. 38 Power Supply Rejection Ratio – Ambient Temperature 5 LM 339 family RESPONSE TIME (LOW to HIGH) [ μs] 4 4 3 5mV overdrive 3 5mV overdrive 2 20mV overdrive 2 20mV overdrive 100mV overdrive 1 100mV overdrive 1 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE [°C] 80 Fig. 39 Response Time (Low to High) – Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) Fig. 40 Response Time (High to Low) –Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) (*)The data above is ability value of sample, it is not guaranteed. LM339family:0[℃]~+70[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 7/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM2903 family 800 LM 2903 family LM 2903 family Technical Note LM 2903 family POWER DISSIPATION Pd [mW] 600 -40℃ 25℃ 36V 5V 2V 400 200 85℃ 0 0 25 50 75 85 100 AMBIENT TEMPERATURE [℃] Fig. 41 Derating Curve LM 2903 family Fig. 42 Supply Current – Supply Voltage LM 2903 family Fig. 43 Supply Current – Ambient Temperature LM 2903 family 85℃ 2V 5V 25℃ 85℃ 25℃ -40℃ 36V -40℃ Fig. 44 Output Saturation Voltage – Supply Voltage (IOL=4[mA]) LM 2903 family Fig. 45 Output Saturation Voltage – Ambient Temperature (IOL=4[mA]) LM 2903 family Fig. 46 Low Level Output Voltage – Output Sink Current (VCC=5[V]) LM 2903 family 5V 36V -40℃ 2V 25℃ 2V 85℃ 5V 36V Fig. 47 Output Sink Current – Ambient Temperature (VOUT=1.5[V]) LM 2903 family Fig. 48 Input Offset Voltage – Supply Voltage LM 2903 family Fig. 49 Input Offset Voltage – Ambient Temperature LM 2903 family -40℃ 25℃ 36V -40℃ 25℃ 85℃ 5V 85℃ 2V Fig. 50 Input Bias Current – Supply Voltage Fig. 51 Input Bias Current – Ambient Temperature Fig. 52 Input Offset Current – Supply Voltage (*)The data above is ability value of sample, it is not guaranteed.LM2903family:-40[℃]～+85[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 8/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM2903 family LM 2903 family LM 2903 family Technical Note LM 2903 family 85℃ 36V 2V 25℃ 5V 36V -40℃ 15V 5V Fig. 53 Input Offset Current – Ambient Temperature LM 2903 family Fig. 54 Large Signal Voltage Gain – Supply Voltage LM 2903 family Fig. 55 Large Signal Voltage Gain – Ambient Temperature LM 2903 family 25℃ 85℃ -40℃ 36V 85℃ 5V 2V -40℃ 25℃ Fig. 56 Common Mode Rejection Ratio – Supply Voltage LM 2903 family Fig. 57 Common Mode Rejection Ratio – Ambient Temperature LM 2903 family Fig. 58 Input Offset Voltage – Input Voltage (VCC=5V) LM 2903 family 5mV overdrive 100mV overdrive 20mV overdrive 85℃ 25℃ -40℃ Fig. 59 Power Supply Rejection Ratio – Ambient Temperature LM 2903 family Fig. 60 Response Time (Low to High) – Over Drive Voltage (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) LM 2903 family Fig. 61 Response Time (Low to High) – Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) 100mV overdrive 20mV overdrive 5mV overdrive 85℃ 25℃ -40℃ Fig. 62 Response Time (High to Low) – Over Drive Voltage Fig. 63 Response Time (High to Low) – Ambient Temperature (*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]～+85[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 9/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM2901 family 1000 LM 2901 family LM 2901 family Technical Note LM 2901 family POWER DISSIPATION Pd [mW] 800 -40℃ 600 25℃ 36V 5V 2V 400 200 85℃ 85 0 0 25 50 75 100 AMBIENT TEMPERATURE [℃] Derating Curve LM 2901 family Fig. 64 Supply Current – Supply Voltage LM 2901family Fig. 65 Supply Current – Ambient Temperature LM 2901family Fig. 66 85℃ 2V 5V 25℃ 85℃ 25℃ -40℃ 36V -40℃ Fig. 67 Output Saturation Voltage – Supply Voltage (IOL=4[mA]) LM 2901 family Fig. 68 Output Saturation Voltage – Ambient Temperature (IOL=4[mA]) LM 2901 family Fig. 69 Low Level Output Voltage – Output Sink Current (VCC=5[V]) LM 2901 family 5V 36V -40℃ 2V 25℃ 2V 85℃ 5V 36V Fig. 70 Output Sink Current – Ambient Temperature (VOUT=1.5[V]) LM 2901 family Fig. 71 Input Offset Voltage – Supply Voltage LM 2901 family Fig. 72 Input Offset Voltage – Ambient Temperature LM 2901 family -40℃ 25℃ 36V -40℃ 25℃ 85℃ 5V 85℃ 2V Fig. 73 Input Bias Current – Supply Voltage Fig. 74 Input Bias Current – Ambient Temperature Fig. 75 Input Offset Current – Supply Voltage (*)The data above is ability value of sample, it is not guaranteed.LM2903family:-40[℃]～+85[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 10/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Reference Data LM2901 family LM 2901 family LM 2901 family Technical Note LM 2901 family 85℃ 36V 2V 25℃ 5V 36V -40℃ 15V 5V Fig. 76 Input Offset Current – Ambient Temperature LM 2901 family Fig. 77 Large Signal Voltage Gain – Supply Voltage LM 2901 family 25℃ 36V Fig. 78 Large Signal Voltage Gain – Ambient Temperature LM 2901 family 85℃ -40℃ 85℃ 5V 2V -40℃ 25℃ Fig. 79 Common Mode Rejection Ratio – Supply Voltage LM 2901 family Fig. 80 Common Mode Rejection Ratio – Ambient Temperature LM 2901 family Fig. 81 Input Offset Voltage – Input Voltage (VCC=5V) LM 2901 family 5mV overdrive 100mV overdrive 20mV overdrive 85℃ 25℃ -40℃ Fig. 82 Power Supply Rejection Ratio – Ambient Temperature LM 2901 family Fig. 83 Response Time (Low to High) – Over Drive Voltage (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) LM 2901 family Fig. 84 Response Time (Low to High) – Ambient Temperature (VCC=5[V],VRL=5[V],RL=5.1[kΩ]) 100mV overdrive 20mV overdrive 5mV overdrive 85℃ 25℃ -40℃ Fig. 85 Response Time (High to Low) – Over Drive Voltage Fig. 86 Response Time (High to Low) – Ambient Temperature (*)The data above is ability value of sample, it is not guaranteed. LM2903family:-40[℃]～+85[℃] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 11/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Circuit Diagram Technical Note V+ OUTPUT + INPUT - INPUT GND Fig.87 Circuit Diagram (each Comparator) ●Measurement circuit 1 NULL Method measurement condition Parameter Input Offset Voltage Input Offset Current Input Bias Current VF VF1 VF2 VF3 VF4 VF5 VF6 S1 ON OFF OFF ON ON S2 ON OFF ON OFF ON S3 ON ON ON LM393/LM339 family V + V+,GND,EK,VICR unit：[V] LM2903/LM2901 family VICR 0 0 0 0 0 0 V + GND 0 0 0 0 0 0 EK GND 0 0 0 0 0 0 EK VICR 0 0 0 0 0 0 Calculation 1 2 3 5 to 30 5 5 5 15 15 -1.4 -1.4 -1.4 -1.4 -1.4 -11.4 5 to 30 5 5 5 15 15 -1.4 -1.4 -1.4 -1.4 -1.4 -11.4 Voltage Gain ON 4 －Calculation－ 1.Input offset voltage (VIO) Vio  VF1 1+ Rf /Rs 0.1[μF] [V] Rf 50[kΩ] 2.Input offset current (IIO) Iio  VF2 - VF1 Ri (1+ R f / R s) [A] V ICR RS＝ 50[Ω] S1 RK 500[kΩ] 0.1[μF] +15[V ] V+ EK Ri＝ 10[kΩ] Ri＝ 10[kΩ] RS＝ 50[Ω] S2 3.Input bias current (IIb) Ib  VF4 - VF3 2× R i (1+ Rf / Rs) [A] DUT S3 RK 500[kΩ] NULL 1000[pF] GND RL V RL -15[V ] V VF 50[kΩ] 4.Voltage gain (AVD) AV  20× Log 10× (1+ Rf /Rs) VF6 - VF5 Fig.88 Measurement Circuit1 (each Comparator) [dB] www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 12/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Measurement Circuit 2: Switch Condition SW No. Supply Current Output Sink Current Saturation Voltage Output Leakage Current Response Time ― VOL=1.5[V] IOL=4[mA] VOH=36[V] RL=5.1[kΩ] VRL=5[V] SW 1 OFF OFF OFF OFF ON SW 2 OFF ON ON ON OFF SW 3 OFF ON ON ON ON SW 4 OFF OFF OFF OFF ON SW 5 OFF ON OFF OFF OFF Technical Note SW 6 OFF ON OFF OFF ON SW 7 OFF OFF ON ON OFF V + 5[V ] A － SW1 SW2 SW3 GND 0[V ] ＋ SW4 SW5 SW6 SW7 RL A V V IN- V IN+ V RL V OL/V OH Fig.89 Measurement Circuit 2 (each Comparator) Input waveform VIN +100[m V] 0[V] VIN Input waveform over drive 0[V] over drive +100[m V] VUOT 5[V] VUOT Output waveform 5[V] Output waveform 2.5[V] 2.5[V] 0[V] Tre LH 0[V] Tre LH Fig.90 Response Time www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 13/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Description of electrical characteristics Technical Note Described below are descriptions of the relevant electrical terms. Please note that item names, symbols, and their meanings may differ from those on another manufacturer’s documents. 1. Absolute maximum ratings The absolute maximum ratings are values that should never be exceeded, since doing so may result in deterioration of electrical characteristics or damage to the part itself as well as peripheral components. 1.1 Power supply voltage (V+/GND) Expresses the maximum voltage that can be supplied between the positive and negative power supply terminals without causing deterioration of the electrical characteristics or destruction of the internal circuitry. 1.2 Differential input voltage (VID) Indicates the maximum voltage that can be supplied between the non-inverting and inverting terminals without damaging the IC. 1.3 Input common-mode voltage range (VICR) Signifies the maximum voltage that can be supplied to non-inverting and inverting terminals without causing deterioration of the electrical characteristics or damage to the IC itself. Normal operation is not guaranteed within the input common-mode voltage range of the maximum ratings – use within the input common-mode voltage range of the electric characteristics instead. 1.4 Operating temperature range and storage temperature range (Topr,Tstg) The operating temperature range indicates the temperature range within which the IC can operate. The higher the ambient temperature, the lower the power consumption of the IC. The storage temperature range denotes the range of temperatures the IC can be stored under without causing excessive deterioration of the electrical characteristics. 1.5 Power dissipation (Pd) Indicates the power that can be consumed by a particular mounted board at ambient temperature (25°C). For packaged products, Pd is determined by maximum junction temperature and the thermal resistance. 2. Electrical characteristics 2.1 Input offset voltage (VIO) Signifies the voltage difference between the non-inverting and inverting terminals. It can be thought of as the input voltage difference required for setting the output voltage to 0V. 2.2 Input offset current (IIO) Indicates the difference of the input bias current between the non-inverting and inverting terminals. 2.3 Input bias current (IIB) Denotes the current that flows into or out of the input terminal, it is defined by the average of the input bias current at the non-inverting terminal and the input bias current at the inverting terminal. 2.4 Input common-mode voltage range (VICR) Indicates the input voltage range under which the IC operates normally. 2.5 Large signal voltage gain (AVD) The amplifying rate (gain) of the output voltage against the voltage difference between the non-inverting and inverting terminals, it is (normally) the amplifying rate (gain) with respect to DC voltage. AVD = (output voltage fluctuation) / (input offset fluctuation) 2.6 Circuit current (ICC) Indicates the current of the IC itself that flows under specific conditions and during no-load steady state. 2.7 Output sink current (IOL) Denotes the maximum current that can be output under specific output conditions. 2.8 Output saturation voltage low level output voltage (VOL) Signifies the voltage range that can be output under specific output conditions. 2.9 Output leakage current (ILeak) Indicates the current that flows into the IC under specific input and output conditions. 2.10 Response time (tre) The interval between the application of input and output conditions. 2.11 Common-mode rejection ratio (CMRR) Denotes the ratio of fluctuation of the input offset voltage when the in-phase input voltage is changed (DC fluctuation). CMRR = (change of input common-mode voltage) / (input offset fluctuation) 2.12 Power supply rejection ratio (PSRR) Signifies the ratio of fluctuation of the input offset voltage when the supply voltage is changed (DC fluctuation). PSRR = (change in power supply voltage) / (input offset fluctuation) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 14/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Derating Curves 800 1000 Technical Note NOW SERIES LM2903/2901/393/339 family POWER DISSIPATION Pd [mW] POWER DISSIPATION Pd [mW] 600 800 LM393MX LM2903MX 600 400 LM2901MX 400 LM339MX 200 200 0 0 25 50 70 85 0 100 0 25 50 70 85 75 75 100 AMBIENT TEMPERATURE [℃] LM393MX, LM2903MX AMBIENT TEMPERATURE [℃] LM339MX, LM2901MX Power Dissipation Power Dissipation Package SO package8 (*8) Pd[W] 450 θja [℃/W] 3.6 θja = (Tj-Ta)/Pd[℃/W] Package SO package14 Pd[W] 610 θja [℃/W] 4.9 θja = (Tj-Ta)/Pd[℃/W] Fig.102 Derating Curves ●Notes for use 1) Unused circuits When there are unused circuits it is recommended that they be connected as in Fig. 103, setting the non-inverting input terminal to a potential within the in-phase input voltage range (VICR). 2) Input terminal voltage Applying GND + 36V to the input terminal is possible without causing deterioration of the electrical characteristics or destruction, irrespective of the supply voltage. However, this does not ensure normal circuit operation. Please note that the circuit operates normally only when the input voltage is within the common mode input voltage range of the electric characteristics. V+ － ＋ GND Fig.103 3) Power supply (single / dual) + The op-amp operates when the specified voltage supplied is between V and GND. Therefore, the single supply op-amp can be used as a dual supply op-amp as well. Power dissipation Pd Using the unit in excess of the rated power dissipation may cause deterioration in electrical characteristics due to a rise in chip temperature, including reduced current capability. Therefore, please take into consideration the power dissipation (Pd) under actual operating conditions and apply a sufficient margin in thermal design. Refer to the thermal derating curves for more information. Short-circuit between pins and erroneous mounting Incorrect mounting may damage the IC. In addition, the presence of foreign particles between the outputs, the output and the power supply, or the output and GND may result in IC destruction. Terminal short-circuits + When the output and V terminals are shorted, excessive output current may flow, resulting in undue heat generation and, subsequently, destruction. Operation in a strong electromagnetic field Operation in a strong electromagnetic field may cause malfunctions. Radiation This IC is not designed to withstand radiation. IC handing Applying mechanical stress to the IC by deflecting or bending the board may cause fluctuations in the electrical characteristics due to piezoelectric (piezo) effects. Board inspection Connecting a capacitor to a pin with low impedance may stress the IC. Therefore, discharging the capacitor after every process is recommended. In addition, when attaching and detaching the jig during the inspection phase, ensure that the power is turned OFF before inspection and removal. Furthermore, please take measures against ESD in the assembly process as well as during transportation and storage. 4) 5) 6) 7) 8) 9) 10) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 15/16 2011.06 - Rev.C LM393MX,LM2903MX,LM339MX,LM2901MX ●Ordering part number Technical Note L M 3 3 9 M Package M : S.O package X Packaging and forming specification X: Embossed tape and reel Family name LM393 LM339 LM2901 LM2903 S.O package8 4.9±0.2 (MAX 5.25 include BURR) ° 4° +6° −4 0.45Min. Tape Quantity Direction of feed Embossed carrier tape 2500pcs 8 7 6 5 6.0±0.3 3.9±0.2 ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 1 2 3 4 0.545 1.375±0.1 0.2±0.1 S 0.175 1.27 0.42±0.1 0.1 S 1pin (Unit (Unit : mm) Reel Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. S.O package14 8.65 ± 0.1 (Max 9.0 include BURR) 14 8 ° 4° +6° −4 Tape Quantity Embossed carrier tape 2500pcs 6.0 ± 0.2 3.9 ± 0.1 0.65± 0.15 1.05± 0.2 Direction of feed ( reel on the left hand and you pull out the tape on the right hand The direction is the 1pin of product is at the upper left when you hold ) 0.515 1.65MAX 1 1PIN MARK 7 +0.05 0.22 −0.03 S 1.375 ± 0.075 0.175 ± 0.075 1.27 +0.05 0.42 −0.04 0.08 S 0.08 M 1pin (Unit : mm) Reel Direction of feed ∗ Order quantity needs to be multiple of the minimum quantity. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 16/16 2011.06 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A