2SD1651C

Ordering number : ENN7086 2SD1651C NPN Triple Diffused Planar Silicon Transistor 2SD1651C Color TV Horizontal Deflection Output Applications Features • • • • • Package Dimensions unit : mm 2174A [2SD1651C] 16.0 3.4 5.6 3.1 High speed. High breakdown voltage(VCBO=1500V). High reliability(Adoption of HVP process). Adoption of MBIT process. On-chip damper diode. 5.0 21.0 4.0 22.0 8.0 2.8 2.0 20.4 0.7 0.9 1 2 5.45 3 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25°C Conditions 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PMLH Ratings 1500 800 6 6 15 3.0 60 150 --55 to +150 Unit V V V A A W W °C °C 5.45 Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Collector Cutoff Current Collector Sustain Voltage Emitter Cutoff Current DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO ICES VCEO(sus) IEBO hFE1 hFE2 VCE(sat) VBE(sat) Conditions VCB=800V, IE=0 VCE=1500V, RBE=0 IC=100mA, IB=0 VEB=4V, IC=0 VCE=5V, IC=0.5A VCE=5V, IC=3.5A IC=3.15A, IB=0.63A IC=3.15A, IB=0.63A Ratings min typ max 10 1.0 130 8 3 1.5 Unit µA mA V mA 3.5 800 40 10 5 0.8 2.1 V V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1501 TS IM TA-3439 No.7086-1/4 2SD1651C Continued from preceding page. Parameter Fall Time Diode Forward Voltage Symbol tf VF Conditions IC=2A, IB1=0.4A, IB2=--0.8A IEC =6A Ratings min typ max 0.3 2 Unit µs V Switching Time Test Circuit PW=20µs D.C.≤1% INPUT IB1 IB2 VR 50Ω + 100µF VBE= --2V + 470µF VCC=200V RB RL=100Ω OUTPUT A 6 IC -- VCE 2.0 1.4A 1.6A 1.2A 1.0A 0.8A 0.6A 0.4A 7 IC -- VBE VCE=5V 5 6 Collector Current, IC -- A Collector Current, IC -- A 4 1.8A 5 4 3 0.2A 2 3 Ta =1 2 0 0.2 0.4 0.6 0 0 1 2 3 4 5 6 7 8 IB=0 9 10 0 0.8 1.0 1.2 IT01909 Collector-to-Emitter Voltage, VCE -- V 5 3 2 IT01908 5 3 hFE -- IC Base-to-Emitter Voltage, VBE -- V VCE(sat) -- IC VCE=5V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V -40 1 1 25° C °C 0.05A 0°C 2 IC / IB=5 °C Ta= --4 0 Ta= --40 ° 120°C 120°C 7 10 IT01911 Ta= °C 120 25 °C 0°C --4 2 1.0 7 5 3 2 0.1 7 5 3 2 DC Current Gain, hFE 10 7 5 3 2 C 25°C 1.0 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 10 IT01910 7 0.01 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 25°C 5 No.7086-2/4 2SD1651C 7 5 SW Time -- IC Switching Time, SW Time -- µs tstg VCC=200V IC / IB1=5 IB2 / IB1=2 R load 10 7 5 3 2 SW Time -- IB2 ts tg VCC=200V IC=2A IB1=0.4A R load Switching Time, SW Time -- µs 3 2 1.0 7 5 3 2 1.0 7 5 3 2 tf tf 0.1 0.1 2 3 5 7 1.0 2 3 5 5 3 2 Forward Bias A S O ICP=15A Collector Current, IC -- A 10 IT01912 7 0.1 0.1 2 3 5 7 1.0 2 3 5 IT01913 5 3 2 Reverse Bias A S O L=500µH IB2= --1A Base Current, IB2 -- A Collector Current, IC -- A 0W Collector Current, IC -- A 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 IC=6A P C =6 µs 00 =1 s P T 00µ 3 10 7 5 3 2 1.0 7 5 3 2 0.1 s 1m 10 ms era tio n DC op Tc=25°C Single pulse 2 3 5 7 10 2 3 5 7 100 2 3 Tc=25°C Single pulse 2 3 5 7 100 2 3 5 7 1000 2 3 1.0 Collector-to-Emitter Voltage, VCE -- V 3.5 5 7 1000 IT01914 10 PC -- Ta Collector-to-Emitter Voltage, VCE -- V 70 IT01915 PC -- Tc 3.0 60 Collector Dissipation, PC -- W 2.5 Collector Dissipation, PC -- W 100 120 140 160 50 2.0 No he at 40 sin 1.5 k 30 1.0 20 0.5 0 0 20 40 60 80 10 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- °C IT01916 Case Temperature, Tc -- °C IT01917 No.7086-3/4 2SD1651C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS No.7086-4/4