CPH3235

Ordering number : ENN7783 CPH3235 CPH3235 Applications • NPN Epitaxial Planar Silicon Transistor DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, strobes. Features • • • • • • • Adoption of MBIT processes. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Narrow hFE range . Ultrasmall package permitting applied sets to be small and slim (mounting height : 0.9mm). High allowable power dissipation. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8m) Conditions Ratings 40 30 5 3 5 600 0.9 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=30V, IE=0 VEB=4V, IC=0 VCE=2V, IC=500mA VCE=10V, IC=500mA VCB=10V, f=1MHz 250 450 20 Conditions Ratings min typ max 0.1 0.1 400 MHz pF Unit µA µA Marking : DF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62504EA TS IM TB-00000079 No.7783-1/4 CPH3235 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=1.5A, IB=30mA IC=1.5A, IB=75mA IC=1.5A, IB=30mA IC=10µA, IE=0 IC=1mA, RBE=∞ IE=10µA, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. 40 30 5 30 300 15 Ratings min typ 90 75 0.83 max 135 115 1.2 Unit mV mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 0.6 0.15 Switching Time Test Circuit PW=20µs D.C.≤1% IB1 OUTPUT IB2 VR 50Ω + 100µF + 470µF VCC=12V RB 0.2 INPUT RL 0.05 1.6 1 1.9 0.2 2 0.6 2.8 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 VBE= --5V IC=20IB1= --20IB2=500mA 3.0 IC -- VCE A 60m 3 IC -- VBE VCE=2V 2.5 40m 20m A A 15mA Collector Current, IC -- A Collector Current, IC -- A 2.0 10mA 8mA 2 6mA 1.5 1.0 1 2mA 0.5 0 0 IB=0 0.2 0.4 0.6 0.8 1.0 IT06841 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Collector-to-Emitter Voltage, VCE -- V 7 hFE -- IC Base-to-Emitter Voltage, VBE -- V 3 2 --25°C IT06842 VCE(sat) -- IC VCE=2V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 25°C 4mA Ta=75° C 0.1 7 5 3 2 IC / IB=20 5 DC Current Gain, hFE Ta=75°C 25°C 3 --25°C 2 = Ta °C 75 C 5° --2 0.01 7 25 °C 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A IT06843 Collector Current, IC -- A IT06844 No.7783-2/4 CPH3235 3 2 VCE(sat) -- IC IC / IB=50 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 VBE(sat) -- IC IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 0.1 7 5 1.0 7 2 C 5° Ta= --25°C 75°C 25°C 3 2 7 Ta= 5°C --2 C 5° 5 3 2 0.01 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 57 IT06845 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC -- A 7 fT -- IC Collector Current, IC -- A 100 IT06846 Cob -- VCB VCE=10V Output Capacitance, Cob -- pF f=1MHz 7 Gain-Bandwidth Product, fT -- MHz 5 3 5 2 3 2 100 7 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 10 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector Current, IC -- A 10 7 5 IT06847 1.0 0.9 ASO Collector-to-Base Voltage, VCB -- V IT06848 PC -- Ta ICP=5A IC=3A 10 10 DC 10µs Collector Dissipation, PC -- W Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 1m 0m era s 10 ms 0µ s M 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 ou nt ed 50 s 0µ s on ac op er am ic tio n bo ar d (6 00 m m2 ! 0. 0.01 0.1 Ta=25°C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 5 8m m ) 0 20 40 60 80 100 120 140 160 Collector-to-Emitter Voltage, VCE -- V IT06849 Ambient Temperature, Ta -- °C IT06850 No.7783-3/4 CPH3235 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.7783-4/4