LA8160V

Ordering number : ENA0513A Monolithic Linear IC LA8160V Overview AGC Amplifier and Pre Amplifier The LA8160V is an AGC amplifier for the digital ADC and a pre amplifier for the analog SAW filter. Features • VCC = 5V • IF Input Frequency Range • AGC Amplifier Gain • AGC Gain Reduction • AGC Amplifier Output Amplitude • Pre Amplifier Gain • Pre Amplifier Output Amplitude 30 to 100MHz 30dB 40dB 2Vp-p (differential) 29dB 2Vp-p Functions • IF AGC control • IF AGC amplifier for AD Converter • Pre Amplifier for SAW Filter • Function mode switch Notes : This device is ESD sensitive. So, the device should be treated carefully. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 90308 MS PC/N2206 MS PC B8-7842 No.A0513-1/8 LA8160V Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Maximum pin voltage Circuit voltages Circuit current Symbol VCC max V max11 V max I6 I7 Allowable power dissipation Operating temperature Storage temperature Pd max Topr Tstg Pin 3, 4, 14 Pin 11 Pin 8, 9 Pin 6 sink current Pin 7 sink current Ta ≤ 85°C Conditions Ratings 6.0 6.5 VCC 2 2 430* -20 to +85 -55 to +150 Unit V V V mA mA mW °C °C *On the board (60 × 70 × 1.6mm3 Double-Layers epoxy glass) Recommended Operating Conditions at Ta = 25°C Parameter Recommended supply voltage Operating supply voltage range Symbol VCC VCC op Pin 3, 4, 11, 14 Pin 3, 4, 11, 14 Conditions Ratings 5.0 4.5 to 5.45 Unit V V Electrical Characteristics AC Characteristics at Ta = 25°C, VCC = 5.0V Parameter Input frequency range AGC amp section [V8 = Lo] AGC amp circuit current AGC amp maximum gain AGC amp noise figure Intermodulation ICC1 G max NF1 IM3 3, 4 6/1, 16 7/1, 16 6, 7 6/1, 16 7/1, 16 AGC range Output level 1 Output level 2 Maximum AGC voltage LO leakage Pre amp section [V8 = Hi] Pre amp. circuit current Pre amp gain Pre amp noise figure 920k beat level Output level Function switch Section AGC amp active Pre amp active AGC amp active V8L V8H I8L I8H 8 8 8 8 I3, 4, 14 = ON, I11 = OFF I4 = OFF, I3, 11, 14 = ON V8 = 0V I3, 4, 14 = ON, I11 = OFF V8 = 5V I4 = OFF, I3, 11, 14 = ON *1 : Test circuit (1), *2 : Test circuit (2), *3 : Test circuit (3), *4 : Test circuit (4) 200 μA 2.0 5 0.8 V V μA ICC2 G2 NF2 B920 VO11 3, 11, 14 11/1, 16 11 11 11 No signal f = 45.75MHz f = 45.75MHz P/C = 15dB, P/S = 15dB Output level = 2Vp-p VIN = 27dBmV *3 1.3 2.0 2.5 Vp-p *4 *3 *3 50 25 67 29 8 -78 -74 79 31 mA dB dB dBc GR VO6 VO7 V9 max Lp 6/1, 16 7/1, 16 6 7 9 6, 7 Maximum gain Lp = 6, 7/11 AGC amp gain = max *2 No signal V9 = 2.5V f = 45.75MHz V9 = 2.5V, f = 45.75MHz VIN = 30dBmV, f = 45MHz, 50MHz Output level = 1Vp-p Output level < ±1dB f = 45.75MHz *1 *1 2.5 -48 1.0 1.0 VCC -40 Vp-p Vp-p V dBc *1 40 dB *1 45 8 54 dB dB *1 *1 29 26 39 30 48 32 mA dB Symbol f (in) Pin No. 1, 16 Conditions min *1 30 Ratings typ max 100 MHz Unit No.A0513-2/8 LA8160V Package Dimensions unit : mm (typ) 3178B 5.2 16 9 4.4 6.4 1 0.65 (0.33) 8 0.15 0.22 1.5max SANYO : SSOP16(225mil) Pin Description Pin Number 1 16 IF Input Description Equivalent circuit 0.1 (1.3) 0.5 Bias 1kΩ 1 16 1kΩ 2 3 4 5 10 12 13 15 14 AGC/Pre Amp. GND AGC/Pre Amp. VCC Driver Amp. VCC Driver Amp. GND Driver Amp. GND Driver Amp. VCC Continued on next page. No.A0513-3/8 LA8160V Continued from preceding page Pin Number 11 Description Driver Amp. Output Equivalent circuit 40mA 11 5Ω 6 7 Driver Amp. Output VCC 30Ω 6 30Ω 7 5mA 5mA 9 IF AGC Control VCC 1kΩ 9 8 Function switch VCC 30kΩ 8 No.A0513-4/8 LA8160V Test Circuit (1) VCC VCC 1000pF 2.2μH 10000pF 0.47μH 30pF 1.3kΩ 250Ω 1000pF 50Ω 1000pF 16 15 14 13 12 11 10 9 VAGC Driver Amp 1000pF AGC /Pre Amp Driver Amp 1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 1000pF 510Ω 510Ω 51Ω Spectrum Analyzer Test Circuit (2) VCC VCC 1000pF 2.2μH 10000pF 0.47μH A 30pF 1.3kΩ 250Ω 1000pF VIN 1000pF 16 15 14 13 12 11 10 9 VAGC Driver Amp 1000pF VIN 1000pF AGC 1 2 3 4 5 6 C 1000pF VCC 1000pF 510Ω 510Ω 51Ω A. 45MHz, 40dBmV B. 44MHz C. 44MHz / 45MHz 7 8 1000pF B AGC /Pre Amp Driver Amp Spectrum Analyzer No.A0513-5/8 LA8160V Test Circuit (3) VCC VCC 1000pF 2.2μH 10000pF 0.47μH 30pF 1.3kΩ 250Ω Spectrum Analyzer 1000pF 1000pF 16 15 14 13 12 11 10 9 Driver Amp 1000pF VIN 1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 1000pF 510Ω 51Ω VCC 510Ω 51Ω AGC /Pre Amp Driver Amp Test Circuit (4) VCC VCC fp = 45.75MHz P : Ref. 1000pF 2.2μH 10000pF 0.47μH 30pF 1.3kΩ 250Ω Spectrum Analyzer 1000pF 1000pF 16 fc = 42.17MHz C : Ref. -15dB 15 14 13 12 11 10 9 Driver Amp 1000pF AGC /Pre Amp Driver Amp 1000pF AGC 1 2 3 4 5 6 7 8 1000pF 1000pF VCC 1000pF 510Ω 51Ω VCC 510Ω 51Ω fs = 42.25MHz S : Ref. -15dB No.A0513-6/8 LA8160V 40 30 20 AGC Amp. Gain -- Vagc Characteristic Measurement circuit 1 Freq. = 45.75MHz 35 AGC Amp. Noise Figure -- Gain Characteristic Measurement circuit 1 Freq. = 45.75MHz 30 Voltage gain – dB 10 0 – 10 – 20 – 30 – 40 – 50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Noise figure – dB 25 20 15 10 5 0 0 5 10 15 20 25 30 35 Vagc – V 120 110 Voltage gain – dB 40 35 30 AGC Amp. Intermodulation Characteristic Measurement circuit 1 Fund = 45MHz, 50MHz Fund (45MHz) Voltage gain – dB AGC Amp. Gain -- Frequency Characteristic Measurement circuit 1 VAGC = 2.5V Output/tone (single) – dBμ 100 90 80 70 60 50 40 30 60 25 20 15 10 IMD3 (40MHz) 65 70 75 80 85 90 95 100 105 110 5 0 0 50 100 150 200 250 300 350 400 450 500 IF input/tone (differential) – dBμ 40 35 30 Frequency – MHz 18 16 14 Pre Amp. Gain -- Frequency Characteristic Measurement circuit 3 Pre Amp. Noise Figure -- Frequency Characteristic Measurement circuit 3 Voltage gain – dB Noise figure – dB 20 30 40 50 60 70 80 90 100 110 12 10 8 6 4 2 0 10 25 20 15 10 5 0 10 20 30 40 50 60 70 80 90 100 110 Frequency – MHz 130 120 110 100 Frequency – MHz Pre Amp. 920kHz Beat Characteristic Measurement circuit 4 Picture o utput Output – dBμ 90 80 70 60 50 40 30 20 80 82 84 86 88 90 92 94 96 98 100 kH 920 zb eat Picture input (differential) – dBμ No.A0513-7/8 LA8160V SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2008. Specifications and information herein are subject to change without notice. PS No.A0513-8/8