4707

Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 2-pole 4707 Plug removal necessary for fuse replacement C14 70° C Description - Panel Mount: Screw-on mounting from front or rear-side - 2 Functions: Appliance Inlet Protection class I, fuse-links 5 x 20 mm 1- or 2-pole - Solder terminals 3.8 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm Characteristics Approvals - All single elements are already wired - With slotted screw type fuseholder Fuseholder meets requirements of medical standard IEC/EN 60601-1 The fuseholder can only be opened with the aid of a tool The fuseholder is accessible from the equipment front - IP40 (fuseholder IP65) - Qualified for use in equipment according IEC/EN 60950 - VDE License Number: 40006816 - UL License Number: E93617 Other versions on request - For protection class II References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Screw: max 6 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Fuseholder Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Dimensions 44.0 36.0 27.0 44 mm 35.8 18.8 2.3 2.3 36.0 34.0 30.0 ø 3.5 3.4 6.1x90˚ E max. R2.5 27.4 E: solder terminals = 37.6 mm E: quick-connect terminals = 41.0 mm Connectors 30.4  4707 www.schurter.com/pg05 Diagrams 6200/05 6220 Power entry modules without line filter L L N E Derating Curves 1-pole Admissible power acceptance in Watt 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Ambient air temperature Ta °C Ambient air temperature Ta °C Variants Socket and fuse-carrier Terminal Quick connect terminals 6.3 x 0.8 mm Solder terminals Quick connect terminals 6.3 x 0.8 mm Solder terminals Fuseholder 1-pole 1-pole 2-pole 2-pole Order Number 4707.1000 4707.1300 4707.2000 4707.2300 Packaging unit Accessories 100 Pcs Description Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Countersunk, B 4700.0002  Connectors Power entry modules without line filter www.schurter.com/pg05 Mating Outlets/Connectors Category / Description 4707 Appliance Outlet Overview complete IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to 4707 4788 5091 5092 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to 4707 Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to 4707 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.