FMR

Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, Holder for MSF 125, horizontal, THT FMR 125 VAC · 5 A (UL/CSA) Description Standards Approvals - Through hole mounting - Horizontal mount - UL 512 - CSA C22.2 no. 39 - UL File Number: E39328 General Product Information Fuseholder to MSF 125 References Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated Current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking Microfuse 125 V PCB Solder THT 125 VAC 5 A (UL/CSA) IP 40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, black, UL 94V-0 Silver-Plated Brass 0.34 g 0 °C to 60 °C, max. 70% r.h. , Approvals 11.3 mm Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Abmessungen   6.6 6.1 1.3 +0.1 0 6.6 4.7 1.05±0.05 5.08 0.5 2.54 Drilling diagram 2.54 Variants Holder l Order Number 0031.7505 Packaging Unit Plastic Bag (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments. 5.08