BUX34

BUX34 MECHANICAL DATA Dimensions in mm(inches) 8.51 (0.34) 9.40 (0.37) NPN SILICON TRANSISTOR 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) FEATURES 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. • FAST SWITCHING • HIGH PULSE POWER 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 APPLICATIONS • POWER SWITCHING CIRCUITS • MOTOR CONTROL 45° TO39 (TO-205AD) Pin 1 = Emitter Pin 2 = Base Pin 3 = Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC IB Ptot Ptot RθJC RθJA Tj,Tstg Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Maximum Collector Current Maximum Base Current Total Power Dissipation at Tcase ≤ 25°C Total Power Dissipation at Tamb ≤ 25°C Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Maximum Junction And Storage Temperature Range 120V 60V 6V 5A 2A 20W 0.87W 7.5°C/W 172.4°C/W -65°C to +175°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6390 Issue 1 BUX34 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO VCBO VEBO ICES ICBO IEBO VCE(sat)* VBE(sat)* hFE ft Cobo Cibo ton toff Collector - Emitter Breakdown Voltage Collector - Base Breakdown Voltage Emitter - Base Breakdown Voltage Collector - Emitter Cut-Off Current Collector - Base Cut-Off Current Emitter - Base Cut-Off Current Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage DC Gain Transition Frequency Output Capcitance Input Capcitance Turn On Time Turn Off Time Test Conditions IC = 100mA IC = 5mA IE = 1.0mA VCE = 60V VCB = 80V VEB = 4V IC = 5A IC = 5A VCE = 2V VCE = 5V IC = 0.5A VCB = 10V VEB = 0.5V IC = 5A IC = 5A f = 20MHz f = 1MHz f = 1MHz IB1 =0.5A IB1 = IB2 = 0.5A IB = 0.5A IB = 0.5A IC = 2A Min. 60 120 6 Typ. Max. Unit V 10 10 10 1.0 V 1.6 40 70 100 400 0.6 1.2 150 — MHz pF μs μA *Pulsed tp =300μs @< 1% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455) 556565. Fax +44(0)1455) 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6390 Issue 1