PC3Q510NIP

PC3Q510NIP PC3Q510NIP s Features 1. Low input drive current (IF=0.5mA) 2. High sensitivity (Darlington type, CTR:Min. 600%) 3. Half-pitch, 4-channel type, well suited for high-density mounting (Lead pitch:1.27mm) 4. Soldering reflow type (230˚C, 30s) 5. Taping package 6. Isolation voltage (Viso (rms):2.5kV) 7. Recognized by UL, file No. E64380 Low Input Current, Half-Pitch Photocoupler s Outline Dimensions 10.3±0.3 1.27±0.25 16 9 (Unit : mm) Internal connection diagram 16 15 14 13 12 11 10 9 PC3Q51 4.4±0.2 1 23 45 67 8 1357 2468 1 8 0.4±0.1 9 11 13 15 10 12 14 16 s Applications 1. Programmable controllers 2. Facsimiles 3. Telephones 2.6±0.2 Primary side mark C0.4 (Input side) 0.2±0.05 Anode Cathode Emitter Collector Epoxy resin 5.3±0.3 0.1±0.1 s Package Specifications Model No. PC3Q510NIP Package specification Taping reel diameter 330mm (1 000pcs.) (Ta=25°C) Unit mA mA V mW V V mA mW mW °C °C kV °C 6˚ +0.4 0.5−0.2 +0.2 7.0−0.7 s Absolute Maximum Ratings Parameter Symbol Rating *1 10 Forward current IF *2 Peak forward current IFM 200 Input Reverse voltage VR 6 *1 Power dissipation P 15 Collector-emitter voltage VCEO 35 Emitter-collector voltage VECO 6 Output IC 80 Collector current *1 PC 150 Collector power dissipation *1 170 Total power dissipation Ptot Operating temperature −30 to +100 Topr −40 to +125 Tstg Storage temperature *3 Isolation voltage Viso (rms) 2.5 *4 260 Soldering temperature Tsol 0.2mm or more Soldering area *1 The derating factors of absolute maximum ratings due to ambient temperature are shown in Fig.2 to 5 *2 Pulse width≤100µs, Duty ratio=0.001(shown in Fig.6) *3 40 to 60%RH, AC for 1 min, f=60Hz *4 For 10 s Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ PC3Q510NIP s Electro-optical Characteristics Parameter Forward voltage Reverse current Terminal capacitance Collector dark current Collector-emitter breakdown voltage Emitter-collector breakdown voltage Collector current Collector-emitter saturation voltage Isolation resistance Floating capacitance Response time Rise time Fall time Symbol VF IR Ct ICEO BVCEO BVECO IC VCE(sat) RISO Cf tr tf Conditions IF=5mA VR=4V V=0, f=1kHz VCE=10V, IF=0 IC=0.1mA, IF=0 IE=10µA, IF=0 IF=0.5mA, VCE=2V IF=1mA, IC=2mA DC500V, 40 to 60%RH V=0, f=1MHz VCE=2V IC=10mA RL=100Ω MIN. − − − − 35 6 3 − 5×1010 − − − TYP. 1.2 − 30 − − − 14 − 1011 0.6 60 53 MAX. 1.4 10 250 1000 − − 60 1.0 − 1.0 300 250 (Ta=25˚C) Unit V µA pF nA V V mA V Ω pF µs µs Input Output Transfer characteristics Fig.1 Forward Current vs. Ambient Temperature Fig.2 Diode Power Dissipation vs. Ambient Temperature 10 Diode power dissipation P (mW) 15 Forward current I F (mA) 10 5 5 0 −30 0 25 50 75 100 125 0 −30 0 25 50 75 100 125 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) PC3Q510NIP Fig.3 Collector Power Dissipation vs. Ambient Temperature Fig.4 Total Power Dissipation vs. Ambient Temperature Collector power dissipation PC (mW) 200 Total power dissipation Ptot (mW) 200 170 150 150 100 100 50 50 0 −30 0 25 50 75 100 125 0 −30 0 25 50 75 100 125 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) Fig.5 Peak Forward Current vs. Duty Ratio 2000 Peak forward current IFM (mA) 1000 500 Pulse width ≤ 100µs Ta = 25˚C 200 100 50 20 10 5 10 −3 2 5 10 −2 2 5 10 −1 2 5 1 Duty ratio Application Circuits NOTICE qThe circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. qObserve the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). qContact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. qContact and consult with a SHARP representative if there are any questions about the contents of this publication. 115