PQ1CX41H2ZPQ

REG Power-Loss Voltage Regulators • TO-220 Type 1 1.4 2 3.3, 5, 9, 12 3.3, 5, 9, 12 24 15 20 ○ ○ ○ A ±2.5 1.0 ○ ○ ○ ○ A ○ ○ △*6 ○ ○ 2 3 1.5 to 30 18 35 ○ ○ △*6 ○ ○ B 2 ○ ○ △*6 ○ ○ B ±2*4 0.5 20 Lead forming available Variable output voltage Package shape type*7 TO-220 B At self-cooling With infinite heat sink attached The xxx in the model No. refer to the output voltage values of the model (e.g. 050 for 5 V, 120 for 12 V, 015 for 1.5 V). Reference voltage precision Current ratings are defined individually. △ : Available by adding circuit Refer to page 35 Mount Type Low Power-Loss Voltage Regulators •SOT-89 Type 0.5 15 0.9 1.2, 1.5, 1.8, 2.5, 3.3, 5.0 ±2.0 1.5 to 9.0 ±2.0*4 0.7 ○ ○ ○ ○ ○ ○ ○ ○ Variable output voltage Output Dropout voltage voltage precision VI-O*3 (V) (%) Low dissipation current at OFF state PQ1LAX95MSPQ Compact, high radiation package, ceramic capacitor compatible Ceramic capacitor compatible, variable output voltage Output voltage Vo*2 (V) TYP. Built-in functions ON/OFF control PQ1LAxx5MSPQ Power Output Input dissipacurrent voltage tion Io Vin Pd*1 (A) (V) (W) Features Electrical characteristics Overcurrent protection Model No. (Ta = 25°C) Absolute maximum ratings Overheat protection ■ Surface *1 *2 *3 *4 ○ 15 1.5 *1 *2 *3 *4 *5 *6 *7 0.5 Package Power Devices/ Analog ICs PQ30RV11J00H PQ30RV31J00H Low dissipation current at OFF state 1 Variable output voltage ±3 Power Output Input dissipation Output Output Dropout (W) current voltage voltage voltage voltage Io Vin Vo*3 precision VI-O*5 (V) TYP. (%) (V) (A) (V) Pd*1 Pd*2 PQxxxRDA1SZH series ASO protection function, low dissipation current at PQxxxRDA2SZH series OFF state (Iqs: 5 µA (MAX.)) PQ30RV21J00H ON/OFF control Features Built-in functions Overcurrent protection Model No. (Ta = 25°C) Absolute maximum ratings Electrical characteristics Overheat protection ■ Low LOW POWER-LOSS VOLTAGE REGULATORS / SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS ○ Package SOT-89 When mounted on a board The xx in the model No. refer to the output voltage values of the model (e.g. 25 for 2.5 V, 50 for 5.0 V). Current ratings are defined individually. Reference voltage precision Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 19 SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS •SC-63 Type (1) Output Voltage Fixed Type PQxxxDNA1ZPH series Ceramic capacitor compatible, ASO protection function, low dissipation current at OFF state (Iqs: 5 µA (MAX.)), solder dip compatible lead shape Minimum operating input voltage: 2.35 V, ceramic capacitor compatible, solder dip compatible lead shape PQxxxGN1HZPH series 10 5 ○ Minimum operating input voltage: 1.7 V (Dual power supply type), ceramic capacitor compatible, solder dip compatible lead shape ○ 3.3, 5, 9, 12 ○ 1.0, 1.2 ○ ○ – ○ F ○ ○ ○ ○ – ○ F 0.3 ○ ○ ○ ○ – ○ 0.9 ○ ○ ○ ○ – ○ F ○ ○ – ○ F ○ ○ – ○ F ±30 mV – SC-63 F With infinite heat sink attached The xxx in the model No. refer to the output voltage values of the model (e.g. 033 for 3.3 V, 050 for 5 V, 120 for 12 V). Current ratings are defined individually. Refer to page 35 ○ PQ070XNA2ZPH Minimum operating input voltage: 2.35 V, ceramic capacitor compatible, solder dip compatible lead shape PQ035ZN1HZPH PQ200WNA1ZPH PQ200WN3MZPH ○ 8 1.5 to 7 (2 A) Reference voltage (Vref): 0.6 V, ○ minimum operating input voltage: 1.7 V (Dual power supply type), ceramic capacitor compatible, ○ solder dip compatible lead shape Minimum operating input voltage: 3.5 V, ASO protection function, low dissipation current at OFF ○ state (Iqs: 5 µA (MAX.)), ceramic capacitor compatible, solder dip compatible lead shape Minimum operating input voltage: 5.5 V, ○ low dissipation current at OFF (0.3) state (Iqs: 5 µA (MAX.)), ceramic capacitor compatible, current limit: 800 mA 5 1.2 to 7 0.8 to 3.5 5.5 ±30 mV Taped package Package Package shape type*4 0.5 ○ ○ ○ ○ ○ ○ F 0.9 ○ ○ ○ ○ ○ ○ F 0.5 ○ ○ ○ ○ ○ ○ F 0.3 ○ ○ ○ ○ ○ ○ F – ○ ○ ○ ○ F – ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ F ○ ○ ○ ○ ○ ○ F ±2.0*2 10 ○ PQ070XNB1ZPH PQ035ZN01ZPH ○ Built-in functions Low dissipation current at OFF state Variable output voltage Features PQ070XNA1ZPH PQ070XNAHZPH (Ta = 25°C) Absolute maximum ratings Electrical characteristics Output current Power Output Output Input Dropout Io dissi- voltage voltage voltage voltage (A) pation Vo preciVin VI-O*3 Pd*1 (V) sion (V) (V) (W) TYP. (%) 0.5 1 1.5 Overheat protection Overcurrent protection Model No. 20 Taped package ○ •SC-63 Type (2) Output Voltage Variable Type *1 *2 *3 *4 Package shape type*4 0.5 1.5, 1.8, 2.5, 3.3 1.2, 1.5, 1.8, 2.5, ±2.0 3.3 1.5, 1.8, 2.5, 3.3 8 5.5 Package ○ ±2.5 ON/OFF control *1 *2 *3 *4 8 8 ○ PQxxxENAHZPH series PQxxxGN01ZPH series 24 ○ PQxxxENA1ZPH series PQxxxENB1ZPH series ○ Output Output Dropout voltage voltage voltage Vo*2 preciVI-O*3 (V) sion (V) TYP. (%) Built-in functions Low dissipation current at OFF state Variable output voltage Features Electrical characteristics ON/OFF control Model No. (Ta = 25°C) Absolute maximum ratings Output current Power Input Io dissivoltage (A) pation Vin Pd*1 (V) (W) 0.5 1 1.5 Overheat protection Overcurrent protection REG SC-63 F 8 3.0 to 20 ±2.5*2 24 6.8 5.0 to 20 0.5 With infinite heat sink attached Reference voltage precision Current ratings are defined individually. Refer to page 35 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. •SOP-8 Type (Ta = 25°C) Features PQ1DX095MZPQ Built-in sink source function (For DDR II memory) Built-in functions Output current Io (A) Input voltage Vin (V) Power dissipation Pd*1 (W) Output voltage Vo (V) TYP. Output voltage precision*2 (mV) Taped package Model No. Electrical characteristics Overcurrent protection Absolute maximum ratings Overheat protection REG SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS / SURFACE MOUNT TYPE CHOPPER REGULATORS Package ±0.8 6 0.6 VDD x 1/2 (VDDQ: 1.5 V (MIN.)) ±25 ○ ○ ○ SOP-8 *1 When mounted on a board *2 Reference voltage precision Mount Type Chopper Regulators (DC-DC Converters) Model No. PQ6CU12X2APQ PQ1CN38M2ZPH PQ1CN41H2ZPH PQ1CX41H2ZPQ PQ1CX53H2MPQ PQ1CX61H1ZPQ *1 *2 *3 *4 Absolute maximum ratings Switch- Power Input ing dissipa- voltage range current tion Vin Isw Pd*1 (W) (V) (A) Features • High switching voltage: 40 V (MAX.) • For tuner power supply • Variable oscillation frequency • Ceramic capacitor compatible • PWM chopper regulator (high oscillation frequency) • Output ON/OFF control function • Overcurrent/overheat protection circuits • For light load • PWM chopper regulator (high oscillation frequency) • Overcurrent/overheat protection circuits • Bootstrap system for high efficiency (Efficiency 90% (TYP.)) • Low voltage output: 0.8 V (MIN.) • Ceramic capacitor compatible • Bootstrap system for high efficiency (Efficiency 89% (TYP.)) • Low voltage output: 0.8 V (MIN.) • Ceramic capacitor compatible • Bootstrap system for high efficiency (Efficiency 88% (TYP.)) • Low voltage output: 1.0 V (MIN.) • Ceramic capacitor compatible 0.25 0.35 0.8 8 1.5 1.5 3.5 1.5 8 3.0 to 5.5 Electrical characteristics Package Output voltage*2 Vo (V) Output Oscillation saturation Output frequency voltage type fo (Hz) Vsat (V) TYP. TYP. up to 36 Stepup StepVREF*3 to 35 down 4.5 to (step-down type)/ –VREF to –30 40 (inverting type) Stepdown 0.8 When 4.75 to mounted 27 on board 2 When 4.75 to mounted 27 on board 0.8 When 4.75 to mounted 28 on board (Ta = 25°C) 300 k to 800 k 300 k Outline shape type*4 Ron SOT-23-6W TYP. 1.7Ω 0.9 Power Devices/ Analog ICs ■ Surface F SC-63 300 k 0.9 0.8 to 20 Stepdown 400 k RDSon SOP-8 TYP. 0.45Ω 0.8 to 16 Stepdown 400 k RDSon USB-8 TYP. 0.15Ω 1.0 to 18.9 Stepdown 900 k RDSon SOP-8 TYP. 0.55Ω F With infinite heat sink attached or when mounted on a board listed in the specification sheets. Output variable range (step-down/inversion). VREF nearly equal to 1.26 V Refer to page 35 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 21 REG ■ Chopper CHOPPER REGULATORS Regulators (DC-DC Converters) • TO-220 Type (Ta = 25°C) Model No. PQ1CG21H2FZH PQ1CG41H2FZH PQ1CG2032FZH PQ1CG3032FZH Absolute Electrical characteristics maximum ratings Switch- Power Input Oscillation ing dissipa- voltage Output voltage Output frequency range current tion Vo*2 type fo (kHz) (V) Vin Isw Pd*1 TYP. (W) (V) (A) Features • PWM chopper regulator • Built-in overcurrent/overheat protection circuits • Output ON/OFF control function • PWM chopper regulator (high oscillation frequency) • Built-in overcurrent/overheat protection circuits • Output ON/OFF control function • PWM chopper regulator • Built-in overcurrent/overheat protection circuits • Output ON/OFF control function • PWM chopper regulator (high oscillation frequency) • Built-in overcurrent/overheat protection circuits • Output ON/OFF control function Package Output saturation voltage Vsat (V) TYP. Outline shape type*5 100 1.0 E 300 1.0 E 1.5*3 14 40 VREF*4 to 35 (step-down type)/ Step–VREF*4 to –30 down (inverting type) TO-220 70 3.5*3 E 1.4 150 E *1 With infinite heat sink attached *2 Output voltage variable range *3 Peak current *4 VREF nearly equal to 1.26 V (TYP.) *5 Refer to page 35 22 Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.