Data sheet
6ES7135-6GB00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 2xI Standard, Pack
quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module
diagnostics, 16 bit
General information
Product type designation
AQ 2xI ST
HW functional status
From FS03
Firmware version
● FW update possible
Yes
usable BaseUnits
BU type A0, A1
Color code for module-specific color identification plate
CC00
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
● Output range scalable
No
Engineering with
● STEP 7 TIA Portal configurable/integrated from
version
V13 SP1 / -
● STEP 7 configurable/integrated from version
V5.5 SP3 / -
● PROFIBUS from GSD version/GSD revision
GSD Revision 5
● PROFINET from GSD version/GSD revision
GSDML V2.3
Operating mode
● Oversampling
No
● MSO
No
CiR - Configuration in RUN
Reparameterization possible in RUN
Yes
Calibration possible in RUN
No
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Input current
Current consumption, max.
110 mA
Power loss
Power loss, typ.
1.5 W
Address area
Address space per module
● Address space per module, max.
4 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding
6ES71356GB000BA1
Page 1/2
1.20.2021
Subject to change without notice
© Copyright Siemens
● Mechanical coding element
Yes
● Type of mechanical coding element
Type A
Analog outputs
Number of analog outputs
2
Cycle time (all channels), min.
1 ms
Analog output with oversampling
No
Output ranges, current
● 0 to 20 mA
Yes; 15 bit
● -20 mA to +20 mA
Yes; 16 bit incl. sign
● 4 mA to 20 mA
Yes; 14 bit
Connection of actuators
● for current output two-wire connection
Yes
Load impedance (in rated range of output)
● with current outputs, max.
500 Ω
● with current outputs, inductive load, max.
1 mH
Destruction limits against externally applied voltages and currents
● Voltages at the outputs
30 V
Cable length
● shielded, max.
1 000 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.
16 bit
Settling time
● for resistive load
0.1 ms; Typical value
● for inductive load
0.5 ms
Errors/accuracies
Linearity error (relative to output range), (+/-)
0.03 %
Temperature error (relative to output range), (+/-)
0.005 %/K
Crosstalk between the outputs, min.
-50 dB
Repeat accuracy in steady state at 25 °C (relative to
output range), (+/-)
0.05 %
Operational error limit in overall temperature range
● Voltage, relative to output range, (+/-)
0.5 %
● Current, relative to output range, (+/-)
0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to output range, (+/-)
0.3 %
● Current, relative to output range, (+/-)
0.3 %
Interrupts/diagnostics/status information
Diagnostics function
Yes
Substitute values connectable
Yes
Alarms
● Diagnostic alarm
Yes
Diagnoses
● Monitoring the supply voltage
Yes
● Wire-break
Yes
● Group error
Yes
● Overflow/underflow
Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)
Yes; green PWR LED
● Channel status display
Yes; green LED
● for channel diagnostics
No
● for module diagnostics
Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels
No
● between the channels and backplane bus
Yes
● between the channels and the power supply of the
electronics
Yes
6ES71356GB000BA1
Page 2/3
1.20.2021
Subject to change without notice
© Copyright Siemens
Isolation
Isolation tested with
707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
-30 °C; < 0 °C as of FS03
● horizontal installation, max.
60 °C
● vertical installation, min.
-30 °C; < 0 °C as of FS03
● vertical installation, max.
50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width
15 mm
Height
73 mm
Depth
58 mm
Weights
Weight, approx.
31 g
last modified:
1/16/2021
6ES71356GB000BA1
Page 3/3
1.20.2021
Subject to change without notice
© Copyright Siemens
很抱歉,暂时无法提供与“6ES71356GB000BA1”相匹配的价格&库存,您可以联系我们找货
免费人工找货