ACA0861CRS7P2

ACA0861 - A, B, C, D 750/860 MHz CATV Line Amplifier MMIC Data Sheet FEATURES • Flat Gain • Very Low Distortion • Excellent Input/Output Match • Low DC Power Consumption • Good RF Stability with High VSWR Load Conditions • Surface Mount Package Compatible with Automatic Assembly • Low Cost • Repeatability of Monolithic Fabrication • Meets Cenelec Standard • RoHS-Compliant Package Options S7 Package 16 Pin Wide Body SOIC with Heat Slug PRODUCT DESCRIPTION The ACA0861 family of surface mount monolithic GaAs RF Linear Amplifiers has been developed to replace, in new designs, the standard CATV Hybrid amplifiers currently in use. The MMICs consist of two parallel amplifiers, each with 12 dB gain. The Amplifiers are optimized for exceptionally low distortion and noise figure while providing flat gain and excellent input and output return loss. There are four differently specified amplifiers available: two input stages and two output stages. The ACA0861A and the ACA0861C are input stages and are specified at +34 dBmV flat output. The ACA0861B RF Input and ACA0861D are output stages and are specified at +44 dBmV flat output. A Hybrid equivalent is formed when one input stage ACA0861 is cascaded with an ACA0861 output stage between two transmission line baluns. For low gain applications a single ACA0861 can be used between baluns, for higher gain applications more than two ACA0861 can be cascaded between baluns. See ACA0861 application note for more information. 12dB 12dB 12dB 12dB ACA0861A/C ACA0861B/D RF Output Figure 1: Hybrid Application Diagram 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 ACA0861 - A, B, C, D Input Stages The ACA0861A and the ACA0861C are designed as input stages and are specified at +34 dBmV flat output. These parts can be used alone for low gain, low output level applications or can be cascaded with one of the ACA0861 output stages for higher gain and output signal drive level. The ACA0861A is a low power dissipation part designed to drive the ACA0861B output stage. The ACA0861C is a slightly higher power dissipation part and provides the needed distortion parameters to drive the ACA0861D output stage. 1 GND 2 N/C 3 RF INA 4 Output Stages The ACA0861B and ACA0861D are designed as output stages and are specified at +44 dBmV flat output. These parts can be used alone for low gain, high output level applications or can be cascaded with one of the ACA0861 input stages for higher gain. The ACA0861B is a low power dissipation part designed as the output stage with an ACA0861A input stage. The ACA0861D is a higher power dissipation part designed as the output stage with an ACA0861C input stage. Cascaded, an ACA0861A and ACA0861B provide exceptional push-pull hybrid equivalent performance; an ACA0861C and an ACA0861D cascaded provide exceptional power doubling hybrid equivalent performance. GND 16 VA 15 RFOUTA 14 GND GND 13 5 GND GND 12 6 RF INB RFOUTB 11 7 I ADJ VB 10 8 GND GND 9 Figure 2: Pin Out Table 1: Pin Description 2 PIN NAME DESCRIPTION PIN NAME DESCRIPTION 1 GND Ground 9 GND Ground 2 N/C No Connection 10 VB Supply for Amplifier B 3 RFINA Input to Amplifier A 11 RFOUTB Output from Amplifier B 4 GND Ground 12 GND Ground 5 GND Ground 13 GND Ground 6 RFINB Input to Amplifier B 14 RFOUTA Output from Amplifier A 7 IADJ Current Adjust 15 VA Supply for Amplifier A 8 GND Ground 16 GND Ground Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Amplifier Supplies (pins 10, 11, 14, 15) 0 +15 VDC RF Input Power (pins 3, 6) - +70 dBmV -65 +150 °C Soldering Temperature - +260 °C Soldering Time - 5.0 sec Storage Temperature Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: 1. Pins 3 and 6 should be AC-coupled. No external DC bias should be applied. 2. Pin 7 should be pulled to ground through a resistor or left open-circuited. No external DC bias should be applied. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT RF Frequency 40 - 860 MHz - +12 - VDC -40 - +110 °C Supply: VD (pins 10, 11, 14, 15) Operating Temperature: TA The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 3 ACA0861 - A, B, C, D Table 4: Electrical Specifications (TA = +25 °C, VD = +12 VDC) PARAMETER ACA0861A ACA0861C ACA0861B ACA0861D UNIT MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX Gain(1) 11.4 11.9 12.4 11.5 12 12.5 11.5 12 12.5 11.6 12.1 12.6 dB Gain Flatness(1) - - +0.3 - - +0.3 - - +0.3 - - +0.3 dB Noise Figure(2) - 3 5 - 3 5 - 3 5 - 3 6 dB CTB(2), (3) 77 Channels 110 Channels 128 Channels - -70 -68 -65 -64 - - -62 -60 -58 -57 - - -77 -75 -71 -68 - - -70 -68 -67 -66 - CSO(2),(3) 77 Channels 110 Channels 128 Channels - -71 -71 -70 -66 - - -66 -66 -64 -60 - - -75 -75 -73 -68 - - -72 -72 -70 -68 - dBc XMOD(2),(3) 77 Channels 110 Channels 128 Channels - -67 -63 -59 -56 - - -62 -56 -55 -50 - - -74 -71 -67 -62 - - -71 -68 -66 -61 - dBc Supply Current(4) - 180 200 - 310 330 - 260 275 - 450 490 -0.5 - 1.0 -0.5 - 1.0 -0.5 - 1.0 -0.5 - 1.0 dB 18 22 - 18 22 - 18 22 - 18 22 - dB - - 6.0 - - 6.0 - - 6.0 - - 6.0  C/W Cable Equivalent Slope(1) Return Loss (Input/Output)(1) Thermal Resistance (JC) dBc mA Notes: (1) Measured performance of MMIC alone. Balun effects de-imbedded from measurement. (2) Measured with a balun on input and output of the device. See Figure 3 for test setup. (3) All parts measured with 110 channel flat input. Parts A and C measured at +34 dBmV output (per channel). Parts B and D measured at +44 dBmV output (per channel). (4) A fixed resistor is needed for parts A through C; part D does not need an external resistor (see Table 6.) These resistors set the devices’ current draw. Bias voltage is +12 VDC. 4 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D C1 T1 16 2 15 3 14 4 5 C2 R1 ACA0861 RF In N/C 1 + VD L1 C5 C3 + TVS C7 T2 13 12 RF Out 6 11 7 10 8 9 C4 L2 C6 +VD Note: Apply voltage to both Vd lines simultaneously. Figure 3: Test Circuit Table 5: Parts List for Test Circuit REF DESCRIPTION C1, C2, C5, C6 0.01uF chip capacitor C3, C4 VENDOR VENDOR PART NO. 4 Murata GRM39X7R1103K25V 300pF chip capacitor 2 Murata GRM39X7R301K25V C7 47uF Electrolytic CAP 1 Digi-Key Corp. P5275-ND L1, L2 390nH air-wound chip inductor 2 Coilcraft 1008CS-391 R1 (see Table 6) 1 ferrite core 2 Philips TC3.4/1.8/1.3-3D3 MWS Wire industries B238611 Digi-Key Corp. SMBJ12ACCCT-ND T1, T2 TVS (1) QTY wire TVS, 12 Volt, 600 Watt 1 Notes: (1) T1, T2 (balun) wind 4 turns thru core, as shown in Figure 4. Table 6: R1 Resistor Value PART NUMBER R1 VALUE ACA0861A 21.5 Ohms ACA0861B 274 Ohms ACA0861C 121 Ohms ACA0861D (open) Figure 4: Balun Drawing (4 Turns) Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 5 ACA0861 - A, B, C, D PERFORMANCE DATA ACA0861A and ACA0861B Cascade Typical Data (see Figure 42) Figure 5: Gain / S21 Figure 6: Reverse Isolation / S12 24.5 0.0 24.0 23.5 -10.0 23.0 -40°C -20 °C 25 °C 45 °C 22.0 85 °C -20.0 S12 (dB) S21 (dB) 22.5 -40 °C -20 °C -30.0 25 °C 100 °C 21.5 45 °C -40.0 21.0 85 °C 100 °C 20.5 -50.0 20.0 19.5 -60.0 0 100 200 300 400 500 600 700 800 900 1000 0 100 200 Frequency (MHz) 400 500 600 700 800 900 1000 Frequency (MHz) Figure 8: Noise Figure vs. Frequency Figure 7: Input Return Loss / S11 5.0 5 0.0 4.5 4 -10.0 3.5 -20 °C 25 °C 45 °C -20.0 NF -40 °C (d B) -5.0 -15.0 S11 (dB) 300 3 2.5 85 °C 2 100 °C -25.0 1.5 -30.0 1 -35.0 0.5 -40.0 0 -45.0 0 100 200 300 400 500 600 700 800 900 0 1000 200 400 600 Frequency (MHz) 800 Frequency (MHz) Figure 9: Output Return Loss / S22 5.0 0.0 -5.0 S22 (dB) -10.0 -40 °C -20 °C 25 °C 45 °C 85 °C 100 °C -15.0 -20.0 -25.0 -30.0 -35.0 -40.0 -45.0 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 6 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B 1000 ACA0861 - A, B, C, D ACA0861A and ACA0861B Cascade Typical Data (see Figure 42) Figure 10: CTB (77 Channel Loading, Flat) -40 Output Power (dBmV) -45 -50 50 48 46 44 42 40 CTB (dBc) -55 -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 Frequency (MHz) Figure 11: CSO (77 Channel Loading, Flat) -50 Output Power (dBmV) -55 CSO (dBc) -60 50 48 46 44 42 40 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 Frequency (MHz) Figure 12: XMOD (77 Channel Loading, Flat) -30 Output Power (dBmV) -35 Xmod (dBc) -40 50 48 46 44 42 40 -45 -50 -55 -60 -65 -70 0 100 200 300 400 500 600 Frequency (MHz) Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 7 ACA0861 - A, B, C, D ACA0861A and ACA0861B Cascade Typical Data (see Figure 42) Figure 13: CTB (110 Channel Loading, Flat) -40 Output Power (dBmV) -45 -50 CTB (dBc) -55 48 46 44 42 40 -60 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 Frequency (MHz) Figure 14: CSO (110 Channel Loading, Flat) -50 Output Power (dBmV) -55 CSO (dBc) -60 48 46 44 42 40 -65 -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 Frequency (MHz) Figure 15: XMOD (110 Channel Loading, Flat) -30 Output Power (dBmV) -35 Xmod (dBc) -40 48 46 44 42 40 -45 -50 -55 -60 -65 -70 0 100 200 300 400 500 600 700 800 Frequency (MHz) 8 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D ACA0861A and ACA0861B Cascade Typical Data (see Figure 42) Figure 16: CTB (128 Channel Loading, Flat) -40 Output Power (dBmV) -45 -50 CTB (dBc) -55 48 46 44 42 40 -60 -65 -70 -75 -80 -85 -90 0 200 400 600 Frequency (MHz) 800 1000 Figure 17: CSO (128 Channel Loading, Flat) -50 Output Power (dBmV) -55 CSO (dBc) -60 48 46 44 42 40 -65 -70 -75 -80 -85 -90 0 200 400 600 800 1000 Frequency (MHz) Figure 18: XMOD (128 Channel Loading, Flat) -30 Output Power (dBmV) -35 Xmod (dBc) -40 48 46 44 42 40 -45 -50 -55 -60 -65 -70 0 200 400 600 800 1000 Frequency (MHz) Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 9 ACA0861 - A, B, C, D ACA0861C and ACA0861D Cascade Typical Data (see Figure 42) Figure 20: Reverse Isolation / S12 Figure 19: Gain / S21 25.5 0.0 25.0 24.5 -10.0 24.0 -40 °C -20 °C -20.0 25 °C 45 °C 23.0 85 °C 100 °C S12 (dB) S21 (dB) 23.5 -40 °C -20 °C 25 °C -30.0 45 °C 85 °C 22.5 100 °C 22.0 -40.0 21.5 -50.0 21.0 20.5 -60.0 0 100 200 300 400 500 600 700 800 900 1000 0 100 200 Frequency (MHz) 400 500 600 700 800 900 1000 Frequency (MHz) Figure 22: Noise Figure vs. Frequency Figure 21: Input Return Loss / S11 5 5.0 4.5 0.0 4 -5.0 -40 °C -20 °C 25 °C 45 °C 85 °C 100 °C -15.0 -20.0 -25.0 3.5 N F (d B ) -10.0 S11 (dB) 300 3 2.5 2 1.5 -30.0 1 -35.0 0.5 -40.0 0 -45.0 0 100 200 300 400 500 600 700 800 900 0 1000 Frequency (MHz) 200 400 600 800 1000 Frequency (MHz) Figure 23: Output Return Loss / S22 5.0 0.0 -5.0 -10.0 -40 °C -20 °C S22 (dB) -15.0 25 °C -20.0 45 °C 85 °C -25.0 100 °C -30.0 -35.0 -40.0 -45.0 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 10 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D ACA0861C and ACA0861D Cascade Typical Data (see Figure 42) Figure 24: CTB (77 Channel Loading, Flat) -40 -45 -50 -50 -55 54 -55 -60 52 -60 -65 50 48 -70 46 -75 44 46 48 50 52 -65 -70 -75 44 -80 -80 -85 -85 -90 -90 0 100 200 300 400 Frequency (MHz) 500 600 0 100 200 300 400 500 600 700 800 Frequency (MHz) Figure 27: CSO (110 Channel Loading, Flat) Figure 26: CSO (77 Channel Loading, Flat) -50 -50 Output Power (dBmV) -55 Output Power (dBmV) -55 54 52 50 48 46 44 -65 -70 -75 -80 CSO (dBc) -60 -60 CSO (dBc) Output Power (dBmV) -45 CTB (dBc) CTB (dBc) Figure 25: CTB (110 Channel Loading, Flat) -40 Output Power (dBmV) 44 46 48 50 52 -65 -70 -75 -80 -85 -85 -90 0 -90 0 100 200 300 400 500 100 200 300 400 500 600 700 800 Frequency (MHz) 600 Frequency (MHz) Figure 29: XMOD (110 Channel Loading, Flat) Figure 28: XMOD (77 Channel Loading, Flat) -40 -50 -55 54 52 50 48 46 44 -60 -65 -70 -75 Output Power (dBmV) -45 -50 -55 Xmod (dBc) -45 Xmod (dBc) -40 Output Power (dBmV) 44 46 48 50 52 -60 -65 -70 -75 -80 -80 -85 -85 -90 -90 0 100 200 300 400 Frequency (MHz) 500 0 600 100 200 300 400 500 600 700 800 Frequency (MHz) Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 11 ACA0861 - A, B, C, D ACA0861C and ACA0861D Cascade Typical Data (see Figure 42) Figure 30: CTB (128 Channel Loading, Flat) -45 -50 Figure 31: CTB (77 Channel Loading, 8 dB Tilt) Output Power (dBmV) -40 48 46 44 -55 -55 CTB (dBc) -60 -65 -70 -75 Output Power (dBmV) -45 -50 CTB (dBc) -40 56 54 52 50 48 46 44 -60 -65 -70 -75 -80 -80 -85 -85 -90 -90 0 200 400 600 800 1000 0 100 200 Frequency (MHz) Figure 32: CSO (128 Channel Loading, Flat) -55 -60 CSO (dBc) -65 -70 -50 48 46 44 -60 -75 500 600 Output Power (dBmV) -55 -70 -75 -80 -85 -85 -90 56 54 52 50 48 46 44 -65 -80 -90 0 200 400 600 800 1000 0 100 200 Frequency (MHz) 300 400 500 600 Frequency (MHz) Figure 34: XMOD (128 Channel Loading, Flat) -45 -50 -55 -60 -65 -70 -75 Figure 35: XMOD (77 Channel Loading, 8 dB Tilt) Output Power (dBmV) -40 48 46 44 -55 Output Power (dBmV) -45 -50 Xmod (dBc) -40 Xmod (dBc) 400 Figure 33: CSO (77 Channel Loading, 8 dB Tilt) Output Power (dBmV) CSO (dBc) -50 56 54 52 50 48 46 44 -60 -65 -70 -75 -80 -80 -85 -85 -90 -90 0 200 400 600 800 0 1000 100 200 300 400 500 600 Frequency (MHz) Frequency (MHz) 12 300 Frequency (MHz) Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D ACA0861C and ACA0861D Cascade Typical Data (see Figure 42) Figure 36: CTB (110 Channel Loading, 10 dB Tilt) -40 -45 -50 -40 -50 -65 -70 -75 -80 -55 CTB (dBc) -60 Output Power (dBmV) -45 56 54 52 50 48 46 44 -55 CTB (dBc) Figure 37: CTB (128 Channel Loading, 12 dB Tilt) Output Power (dBmV) 54 52 50 48 46 44 -60 -65 -70 -75 -80 -85 -85 -90 -90 0 100 200 300 400 500 600 700 0 800 200 Figure 38: CSO (110 Channel Loading, 10 dB Tilt) -50 600 800 1000 Figure 39: CSO (128 Channel Loading, 12 dB Tilt) -50 Output Power (dBmV) -60 56 54 52 50 48 46 44 -65 -70 -75 -80 Output Power (dBmV) -55 -60 CSO (dBc) -55 CSO (dBc) 400 Frequency (MHz) Frequency (MHz) 54 52 50 48 46 44 -65 -70 -75 -80 -85 -85 -90 -90 0 0 100 200 300 400 500 600 700 200 800 400 600 800 1000 Frequency (MHz) Frequency (MHz) Figure 40: XMOD (110 Channel Loading, 10 dB Tilt) -40 -40 -50 -55 54 52 50 48 46 44 -60 -65 -70 -75 Output Power (dBmV) -45 -50 -55 Xmod (dBc) -45 Xmod (dBc) Figure 41: XMOD (128 Channel Loading, 12 dB Tilt) Output Power (dBmV) 54 52 50 48 46 44 -60 -65 -70 -75 -80 -80 -85 -85 -90 -90 0 100 200 300 400 500 600 700 0 800 200 400 600 800 1000 Frequency (MHz) Frequency (MHz) Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 13 ACA0861 - A, B, C, D APPLICATION INFORMATION Notes: 1. Apply voltage to all +12 Vdc lines simultaneously. 2. See Table 6 for R1 values. 3. Input and output baluns: wind 5 turns thru core (see Table 7), as shown in Figure 43. Figure 42: Hybrid Equivalent Test Circuit Table 7: Parts List for Balun (5 Turns) PART VENDOR VENDOR PART NO. ferrite core Philips TC3.4/1.8/1.3-3D3 wire MWS Wire industries B238611 Figure 43: Balun Drawing (5 Turns) 14 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D PACKAGE OUTLINE Figure 44: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 15 ACA0861 - A, B, C, D ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING ACA0861AS7CTR -40 to 110 °C 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861ARS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861BS7CTR -40 to 110 °C 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861BRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861CS7CTR -40 to 110 °C 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861CRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861DS7CTR -40 to 110 °C 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel ACA0861DRS7P2 -40 to 110 °C RoHS-Compliant 16 Pin wide Body SOIC with Heat Slug 1,500 piece tape and reel 16 Data Sheet September 16, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204195B ACA0861 - A, B, C, D NOTES Data Sheet 204195B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 16, 2016 17 ACA0861 - A, B, C, D Copyright © 2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice 18 Data Sheet 204195B • September 16, 2016