SNC82168

SNC82168 12-Channel MIDI/Speech Controller ================== CONTENTS ================= 1 2 3 4 5 5.1. 5.2. 5.3. 5.4. 5.5. 5.6. 5.7. 5.8. 5.9. 5.10. 6 7 8 INTRODUCTION ......................................................................................................................... 3 FEATURES ................................................................................................................................... 3 PIN ASSIGNMENT ...................................................................................................................... 4 BLOCK DIAGRAM ..................................................................................................................... 5 FUNCTION DESCRIPTION ....................................................................................................... 5 OSCILLATOR ................................................................................................................................ 5 ROM ........................................................................................................................................... 6 RAM ........................................................................................................................................... 6 POWER DOWN MODE .................................................................................................................. 6 IR FUNCTION............................................................................................................................... 7 I/O PORTS ................................................................................................................................... 7 SAMPLING RATE COUNTERS ........................................................................................................ 7 AUTO REPETITION ....................................................................................................................... 8 VOICE SYNTHESIZER ................................................................................................................... 8 DAC ........................................................................................................................................... 8 APPLICATION CIRCUIT ........................................................................................................... 9 ABSOLUTE MAXIMUM RATING.......................................................................................... 12 ELECTRICAL CHARACTERISTICS ..................................................................................... 12 Ver: 1.5 1 Sep. 8, 2006 SNC82168 12-Channel MIDI/Speech Controller AMENDENT HISTORY Version Date Ver 1.0 Ver 1.1 Ver 1.2 October 07, 2004 November 12, 2004 March 21, 2005 Description First issue Modify Application Circuit. 1. Oscillator R-Type is “no connect”. Page5 2. Modify Application Circuit.(Low CLK Mode, 32768, R-Type, Xin and Xout no connect) Page10 3. Modify Electric Characteristic (Max->Typical) Page12 4. Modify I/O Circuit in Page7 Ver1.3 June 30,2005 1. Modify RAM Block in Page6 2. Modify Application circuit in Low CLK (RC mode) R=91K, C=200pF. 3. 4. 5. Ver1.4 November 18,2005 In Application Circuit add R=100 (direct key) in Page9 In Application Circuit add R=100 (direct key) in Page9 Modify RAM =384*8 in Page3 1. Modify Application circuit add R=100 in each input pin (direct key). Ver1.5 September,8,2006 1. Removed Application circuit R=100 in each input pin (direct key) Ver: 1.5 2 Sep. 8, 2006 SNC82168 12-Channel MIDI/Speech Controller 1 INTRODUCTION The SNC82168 is a single chip 12-channel MIDI compatible wave-table/voice synthesizer. Equipped with a powerful 8-bit controller and 24 I/O pins, it provides a low-cost MIDI sound system solution. It’ low power consumption and operating range s makes it ideal for all battery operated devices using MIDI or voice synthesis. 2 FEATURES                   Single Power Supply 2.4V – 5.5V Powerful Built-in 8-bit Controller Three 8-bit I/O ports 384*8 bits RAM Maximum 64k program ROM 512K*12 shared ROM for program and voice data Readable ROM code data 12-voice Polyphony through a high-quality speech synthesizer Mark Event Supported in both Wave and Melody. Individual adaptive playing speed from 4k-64kHz for all 12 channels Automatic repetition for each channel Volume modulation controlled by embedded multiplier One digital mixers with saturation control One built-in 10-bit current mode DA converters Analog Direct Drive speaker circuit. System clock: 16.384M Hz (RC-type or Crystal Option) 2 MIPS CPU power free to user Low Voltage Reset Ver: 1.5 3 Sep. 8, 2006 SNC82168 12-Channel MIDI/Speech Controller 3 PIN ASSIGNMENT Symbol P00 ~ P07 P10 ~ P17 P20 ~ P27 VDDVR GNDVR VDDPP GNDPP CVDD VDD GND REGOUT RST XIN XOUT LXIN LXOUT CKSEL I/O I/O I/O I/O P P P P P P P P I I O I O I Function Description Bit7 ~ Bit0 of I/O port 0 Bit7 ~ Bit0 of I/O port 1 Bit7 ~ Bit0 of I/O port 2 Positive power supply for ROSC Negative power supply for ROSC Positive power supply for Direct Drive Negative power supply for Direct Drive Positive power supply for internal circuit Positive power supply for I/O Negative power supply 3V regulator output Chip Reset (Active low) High clock Crystal In High clock Crystal Out Low clock Crystal In Low clock Crystal Out Clock type select ‘ VDD’ RC oscillator ‘ GND’Crystal Test Pin DA output Direct Drive negative output Direct Drive positive output TestM VO BN0 BP0 I O O O Ver: 1.5 4 Sep. 8, 2006 SNC82168 12-Channel MIDI/Speech Controller 4 Block Diagram ROM Program/Speech/Melody/Instrument waveform 512K 12 bits Address Pointers/ STACK Timing Generator OSC SRAM (384 bytes) Timer ALU 10bit D/A Direct Drive IO1 IO2 Sampling Rate Counter Voice Synthesizer IO0 5 FUNCTION DESCRIPTION 5.1. Oscillator CKSEL (Clock Select) input pin of the SNC82168 selects between crystal oscillator/ceramic resonator or RC type oscillators as system clock. VD D 20pf C KS E L XIN XO U T C KS E L XIN XO U T 20pf NC NC 1 6 . 3 8 4 Mh z G ND C r y s ta l / R e s o n a t o r R C O s c illa to r Notice: For RC Oscillator, Keep XOUT and XIN as “No Connect”. Ver: 1.5 5 Sep. 8, 2006 SNC82168 12-Channel MIDI/Speech Controller 5.2. ROM SNC82168 contains a substantial 512K x 12-bit word internal ROM which is shared by program and resource data. Program, voice, melodies, data, and instrument waveforms are shared within this same 512K words ROM. 5.3. RAM SNC82168 contains 384 bytes RAM (384 x 8-bits). The 384 byte RAM is divided into five pages (page0, 1and 4, 128 bytes RAM for each page). The RAMBK register is used to switch to a specific RAM page. For example, declaring Org 0x250 UseMem ds 1 would locate one byte memory for “UseMem” at BANK 4. Setting ‘ RAMbk = 4’in a program would switch to bank 4 of RAM. 0x0000 : : 0x007F 0x0080 : 0x00C0 Reserved for System Free for User 0x00FF 0x0100 : : 0x017F 0x0180 : : 0x01FF 0x0200 : : 0x027F No Used No Used Free for User Notice: (C0~FFh) and (200~27Fh) Bank4 is free for user. 5.4. Power Down Mode Entering the IC into Stop Mode will stop the system clock for power savings (