MM9XXL-15

Triple Balanced Mixer Ultra-Broadband Electrical Specifications : (1) Model MM9xxL-15 RF 2.0 to 18.0 GHz Model MM9xxL-15 Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (4) RF (GHz) 3.0-17.0 2.0-18.0 LO (GHz) 2.0-18.0 2.0-18.0 2.0-18.0 2.0-18.0 2.0-18.0 2.0-8.0 IF (GHz) 2.0-8.0 2.0-8.0 Min Specifications Typical 7.5 dB 8.5 dB 25 dB 23 dB 22 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Max 10.0 dB 10.5 dB LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors 2.0-18.0 2.0-18.0 15 dB 17 dB 2.0-18.0 2.0-18.0 2.0-8.0 2.0-18.0 2.0-18.0 2.0-8.0 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚ C to +100˚ C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚ C and improves less than 0.5 dB at -55˚ C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Typical Performance at 25 ˚C MM9xxL-15 Outline: L All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 Rev. 1/15/07 www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001