SSR1507CT

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR1505CTG thru SSR1507CTG and SSR1505CTS.5 thru SSR1507CTS.5 15 AMP CENTERTAP SCHOTTKY RECTIFIER 50 - 70 VOLTS FEATURES:  Extremely low forward voltage drop  Low reverse leakage  Hermetically sealed custom surface mount package  Guard ring for overvoltage protection  Eutectic die attach  175ºC operating junction temperature  TX, TXV, and S level screening available consult factory Designer’s Data Sheet Part Number / Ordering Information1/ SSR15 __ __ __ __ │ │ │ └ Screening2/ __ = Not Screened │││ TX = TX Level TXV = TXV Level │││ S = S Level │││ │ │ └ Package G = Cerpack ││ S.5 = SMD.5 ││ ││ │ └ Configuration CT = Centertap │ └ Voltage 05 = 50 V 06 = 60 V 07 = 70 V MAXIMUM RATINGS3/ Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive load, 60 Hz, sine wave, TA = 25ºC)4/ Peak Surge Current (8.3 ms pulse, half sine wave superimposed on IO, allow junction to reach equilibrium between pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case)4/ NOTES: 1/ 2/ 3/ 4/ For ordering information, price, and availability - contact factory. Screening based on MIL-PRF-19500. Screening flows available on request. Unless otherwise specified, all electrical characteristics @25ºC. Both legs together. Symbol SSR1505CT SSR1506CT SSR1507CT VRRM VRWM VR IO IFSM TOP & Tstg Cerpack SMD.5 RθJC CERPACK (G) Value 50 60 70 15 100 -65 to +175 1.6 1.6 Units Volts Amps Amps o o C C/W SMD.5 (S.5) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0058A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR1505CTG thru SSR1507CTG and SSR1505CTS.5 thru SSR1507CTS.5 Symbol IF = 1 A IF = 5 A IF = 10 A IF = 1 A IF = 5 A IF = 10 A IF = 1 A IF = 5 A IF = 10 A VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 VF9 IR1 IR2 IR3 CJ ELECTRICAL CHARACTERISTICS (per leg)3/ Instantaneous Forward Voltage Drop (TA=25ºC, 300sec pulse) Instantaneous Forward Voltage Drop (TA=-55ºC, 300sec pulse) Instantaneous Forward Voltage Drop (TA=125ºC, 300sec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300sec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300sec pulse minimum) Reverse Leakage Current (Rated VR, TA = 125ºC, 300sec pulse minimum) Junction Capacitance (VR = 10V, f = 1MHz, TA = 25ºC) Package Outline: CERPACK Min –– –– –– –– –– –– –– –– –– –– –– –– –– Typ 0.38 0.51 0.62 0.46 0.54 0.61 0.26 0.45 0.53 25 4 15 –– Max 0.43 0.58 0.70 0.50 0.62 –– 0.35 0.53 –– 100 –– 25 300 Units VDC VDC VDC A mA mA pF PIN OUT: PIN 1: ANODE 1 PIN 2: ANODE 2 TAB: CATHODE Note: For optimal performance, connect anode terminals together. Bottom View Package Outline: SMD.5 PIN OUT: PIN 1: ANODE 1 PIN 2: ANODE 2 TAB: CATHODE Note: For optimal performance, connect anode terminals together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0058A DOC