D45H5

D44H8 - D44H11 D45H8 - D45H11 Complementary power transistors Features . ■ Low collector-emitter saturation voltage ■ Fast switching speed TAB Applications ■ Power amplifier ■ Switching circuits 3 1 TO-220 Description The devices are manufactured in low voltage multi epitaxial planar technology. They are intended for general purpose linear and switching applications. Table 1. 2 Figure 1. Internal schematic diagram Device summary Order codes Marking Polarity Package Packaging D44H8 D44H8 NPN TO-220 Tube D44H11 D44H11 NPN TO-220 Tube D45H8 D45H8 PNP TO-220 Tube D45H11 D45H11 PNP TO-220 Tube October 2009 Doc ID 4213 Rev 5 1/8 www.st.com 8 Absolute maximum ratings 1 D44H8, D44H11, D45H8, D45H11 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Value Unit Collector-emitter voltage (IB = 0) D44H8 - D45H8 60 V Collector-emitter voltage (IB = 0) D44H11 - D45H11 80 V Emitter-base voltage (IC = 0) 5 V Collector current 10 A Collector peak current 20 A PTOT Total dissipation at Tcase = 25 °C 50 W TSTG Storage temperature -55 to 150 °C 150 °C Value Unit VCEO VEBO IC ICM TJ Note: Max. operating junction temperature For PNP types voltage and current values are negative. Table 3. Symbol 2/8 Parameter Thermal data Parameter RthJC Thermal resistance junction-case max 2.5 °C/W RthJA Thermal resistance junction-ambient max 62.5 °C/W Doc ID 4213 Rev 5 D44H8, D44H11, D45H8, D45H11 2 Electrical characteristics Electrical characteristics Tcase = 25 °C; unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter Test conditions Min. Typ. 60 80 - Max. Unit Collector-emitter sustaining voltage (IB = 0) IC = 100 mA D44H8 - D45H8 D44H11 - D45H11 ICES Collector cut-off current (VBE = 0) VCE = rated VCEO - 10 µA IEBO Emitter cut-off current (IC = 0) VEB = 5 V - 100 µA VCEO(sus) (1) V VCE(sat)(1) Collector-emitter saturation IC = 8 A voltage IB = 0.4 A - 1 V VBE(sat)(1) Base-emitter saturation voltage IC = 8 A IB = 0.8 A - 1.5 V IC = 2 A_ VCE = 1 V 60 - IC = 4 A_ _ VCE = 1 V 40 - hFE(1) DC current gain 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %. Note: For PNP types voltage and current values are negative. Doc ID 4213 Rev 5 3/8 Electrical characteristics 2.1 4/8 D44H8, D44H11, D45H8, D45H11 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain (NPN) Figure 5. DC current gain (PNP) Figure 6. Collector-emitter saturation voltage (NPN) Figure 7. Collector-emitter saturation voltage (PNP) Doc ID 4213 Rev 5 D44H8, D44H11, D45H8, D45H11 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 4213 Rev 5 5/8 Package mechanical data D44H8, D44H11, D45H8, D45H11 TO-220 type A mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max 4.60 0.88 1.70 0.70 15.75 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 16.40 28.90 3.75 2.65 3.85 2.95 0015988_Rev_S 6/8 Doc ID 4213 Rev 5 D44H8, D44H11, D45H8, D45H11 4 Revision history Revision history Table 5. Document revision history Date Revision Changes 21-Jun-2004 4 Document migration, no content change. 20-Oct-2009 5 Updated mechanical data. Doc ID 4213 Rev 5 7/8 D44H8, D44H11, D45H8, D45H11 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 4213 Rev 5