STB5NK50Z-1, STD5NK50ZT4, STP5NK50Z
STP5NK50ZFP, STU5NK50Z
Datasheet
N-channel 500 V, 1.22 Ω typ., 4.4 A SuperMESH™ Power MOSFETs in
I2PAK, DPAK, TO‑220, TO‑220FP and IPAK packages
Features
TAB
TAB
Order codes
2
I PAK
12
TAB
3
2 3
1
TO-220
1
2
TAB
3
TO-220FP
ID
IPAK
1
2
3
•
•
•
•
D(2, TAB)
Package
I2PAK
STD5NK50ZT4
STP5NK50Z
2
RDS(on) max.
STB5NK50Z-1
DPAK
1
VDS
3
DPAK
500 V
1.5 Ω
4.4 A
TO-220
STP5NK50ZFP
TO-220FP
STU5NK50Z
IPAK
100% avalanche tested
Gate charge minimized
Very low intrinsic capacitance
Zener-protected
G(1)
Applications
•
S(3)
Switching applications
AM01475V1
Description
Product status link
STB5NK50Z-1
These high-voltage devices are Zener-protected N-channel Power MOSFETs
developed using the SuperMESH™ technology by STMicroelectronics, an
optimization of the well-established PowerMESH™. In addition to a significant
reduction in on-resistance, these devices are designed to ensure a high level of dv/dt
capability for the most demanding applications.
STD5NK50ZT4
STP5NK50Z
STP5NK50ZFP
STU5NK50Z
DS2834 - Rev 6 - September 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Value
Symbol
Parameter
I2PAK,
DPAK,
TO-220, IPAK
TO-220FP
Unit
VDS
Drain-source voltage
500
V
VGS
Gate-source voltage
±30
V
ID
Drain current (continuous) at TC = 25 °C
4.4
4.4 (1)
A
ID
Drain current (continuous) at TC = 100 °C
2.7
2.7 (1)
A
IDM (2)
Drain current (pulsed)
17.6
17.6 (1)
A
PTOT
Total dissipation at TC = 25 °C
70
25
W
ESD
Gate-source human body model
(R = 1.5 kΩ, C = 100 pF)
3
kV
Insulation withstand voltage (RMS)
VISO
dv/dt (3)
Tj
Tstg
2.5
from all three leads to external heat-sink
(t = 1 s, TC = 25 °C)
Peak diode recovery voltage slope
Operating junction temperature range
Storage temperature range
kV
4.5
V/ns
-55 to 150
°C
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. ISD ≤ 4.4 A, di/dt ≤ 200 A/μs, VDD ≤ V(BR)DSS.
Table 2. Thermal data
Value
Symbol
Parameter
Rthj-case
Thermal resistance junction-case
Rthj-amb
Thermal resistance junction-ambient
Rthj-pcb (1)
I2PAK,
TO-220
TO-220FP
1.78
5
DPAK
IPAK
1.78
62.5
°C/W
100
Thermal resistance junction-pcb
50
Unit
°C/W
°C/W
1. When mounted on an 1-inch² FR-4, 2oz Cu board.
Table 3. Avalanche characteristics
Symbol
IAR
EAS
DS2834 - Rev 6
Parameter
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj Max)
Single pulse avalanche energy
(starting Tj = 25 °C, ID = IAR, VDD = 50 V)
Value
Unit
4.4
A
130
mJ
page 2/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical characteristics
2
Electrical characteristics
(TCASE = 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
V(BR)DSS
Parameter
Drain-source breakdown
voltage
Test conditions
Min.
ID = 1 mA, VGS = 0 V
Typ.
500
Zero gate voltage drain
current
IGSS
Gate body leakage
current
VDS = 0 V, VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 50 µA
RDS(on)
Static drain-source on
resistance
VGS = 10 V, ID = 2.2 A
VGS = 0 V, VDS = 500 V, TC = 125 °C
1
µA
50
µA
±10
µA
3.75
4.5
V
1.22
1.5
Ω
Typ.
Max.
Unit
(1)
3
Unit
V
VGS = 0 V, VDS = 500 V
IDSS
Max.
1. Defined by design, not subject to production test.
Table 5. Dynamic
Symbol
Parameter
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Coss eq. (1)
Equivalent output
capacitance
Qg
Total gate charge
Qgs
Gate-source charge
Qgd
Gate-drain charge
Test conditions
Min.
535
VDS = 25 V, f = 1 MHz, VGS = 0 V
-
75
pF
17
VDS = 0 to 400 V, VGS = 0 V
VDD = 400 V, ID = 4.4 A, VGS = 0 to 10 V
(see Figure 16. Test circuit for gate charge
behavior)
-
45
20
-
pF
28
4
nC
10
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
to 80% VDSS.
Table 6. Switching times
Symbol
td(on)
tr
td(off)
tf
DS2834 - Rev 6
Parameter
Test conditions
Turn-on delay time
VDD = 250 V, ID = 2.2 A,
Rise time
RG = 4.7 Ω, VGS = 10 V
Turn-off delay time
(see Figure 15. Test circuit for resistive load
switching times and Figure 20. Switching
time waveform)
Fall time
Min.
Typ.
Max.
Unit
-
ns
15
-
10
32
15
page 3/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical characteristics
Table 7. Source drain diode
Symbol
Parameter
Test conditions
ISD
Source-drain current
ISDM (1)
Source-drain current
(pulsed)
VSD (2)
Forward on voltage
ISD = 4.4 A, VGS = 0 V
trr
Reverse recovery time
ISD = 4.4 A, di/dt = 100 A/µs
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
VDD = 30 V, Tj = 150°C (see Figure 17. Test
circuit for inductive load switching and
diode recovery times)
Min.
Typ.
Max.
Unit
4.4
-
17.6
-
-
1.6
A
V
310
ns
1.425
µC
9.2
A
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Table 8. Gate-source Zener diode
Symbol
V(BR)GSO
Parameter
Gate-source breakdown
voltage
Test conditions
IGS = ±1 mA, ID = 0 A
Min.
Typ.
Max.
Unit
±30
-
-
V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device.
The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for
additional external componentry.
DS2834 - Rev 6
page 4/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical characteristics curves
2.1
Electrical characteristics curves
Figure 1. Safe operating area for I2PAK, DPAK, TO-220,
IPAK
Figure 2. Thermal impedance for I2PAK, DPAK, TO-220,
IPAK
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
K
GC20940
10 -1
10 -2
10 -3
10 -4
DS2834 - Rev 6
10 -3
10 -2
10 -1
10 0
t p (s)
page 5/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical characteristics curves
Figure 5. Output characterisics
Figure 6. Transfer characteristics
Figure 7. Static drain-source on resistance
Figure 8. Gate charge vs gate-source voltage
Figure 9. Capacitance variations
Figure 10. Normalized gate threshold voltage vs
temperature
DS2834 - Rev 6
page 6/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Electrical characteristics curves
Figure 11. Normalized on resistance vs temperature
Figure 12. Source-drain diode forward characteristic
Figure 13. Normalized V(BR)DSS vs temperature
Figure 14. Maximum avalanche energy vs temperature
V(BR)DSS
(norm)
DS2834 - Rev 6
page 7/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Test circuits
3
Test circuits
Figure 15. Test circuit for resistive load switching times
Figure 16. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 17. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
L
A
B
B
3.3
µF
D
G
+
VD
100 µH
fast
diode
B
Figure 18. Unclamped inductive load test circuit
RG
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
D.U.T.
Vi
_
pulse width
AM01471v1
AM01470v1
Figure 20. Switching time waveform
Figure 19. Unclamped inductive waveform
ton
V(BR)DSS
td(on)
VD
toff
td(off)
tr
tf
90%
90%
IDM
VDD
10%
0
ID
VDD
AM01472v1
VGS
0
VDS
10%
90%
10%
AM01473v1
DS2834 - Rev 6
page 8/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
DS2834 - Rev 6
page 9/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
I²PAK package information
4.1
I²PAK package information
Figure 21. I²PAK package outline
0004982_Rev_H
DS2834 - Rev 6
page 10/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
I²PAK package information
Table 9. I²PAK package mechanical data
Dim.
DS2834 - Rev 6
mm
Min.
Typ.
Max.
A
4.40
-
4.60
A1
2.40
-
2.72
b
0.61
-
0.88
b1
1.14
-
1.70
c
0.49
-
0.70
c2
1.23
-
1.32
D
8.95
-
9.35
e
2.40
-
2.70
e1
4.95
-
5.15
E
10
-
10.40
L
13
-
14
L1
3.50
-
3.93
L2
1.27
-
1.40
page 11/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) type A package information
4.2
DPAK (TO-252) type A package information
Figure 22. DPAK (TO-252) type A package outline
0068772_A_25
DS2834 - Rev 6
page 12/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) type A package information
Table 10. DPAK (TO-252) type A mechanical data
Dim.
mm
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.159
2.286
2.413
e1
4.445
4.572
4.699
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
DS2834 - Rev 6
Typ.
5.10
5.25
6.60
1.00
0.20
0°
8°
page 13/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) type E package information
4.3
DPAK (TO-252) type E package information
Figure 23. DPAK (TO-252) type E package outline
0068772_type-E_rev.25
DS2834 - Rev 6
page 14/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) type E package information
Table 11. DPAK (TO-252) type E mechanical data
Dim.
A
mm
Min.
Typ.
Max.
2.18
2.39
A2
0.13
b
0.65
0.884
b4
4.95
5.46
c
0.46
0.61
c2
0.46
0.60
D
5.97
6.22
D1
5.21
E
6.35
E1
4.32
6.73
e
2.286
e1
4.572
H
9.94
10.34
L
1.50
1.78
L1
L2
2.74
0.89
L4
1.27
1.02
Figure 24. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25
DS2834 - Rev 6
page 15/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) packing information
4.4
DPAK (TO-252) packing information
Figure 25. DPAK (TO-252) tape outline
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
DS2834 - Rev 6
page 16/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
DPAK (TO-252) packing information
Figure 26. DPAK (TO-252) reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 12. DPAK (TO-252) tape and reel mechanical data
Tape
Dim.
mm
mm
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
DS2834 - Rev 6
Reel
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
18.4
22.4
page 17/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
TO-220 type A package information
4.5
TO-220 type A package information
Figure 27. TO-220 type A package outline
0015988_typeA_Rev_21
DS2834 - Rev 6
page 18/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
TO-220 type A package information
Table 13. TO-220 type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
15.75
D1
DS2834 - Rev 6
Typ.
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
page 19/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
TO-220FP package information
4.6
TO-220FP package information
Figure 28. TO-220FP package outline
7012510_Rev_12_B
DS2834 - Rev 6
page 20/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
TO-220FP package information
Table 14. TO-220FP package mechanical data
Dim.
mm
Min.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
DS2834 - Rev 6
Typ.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
page 21/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
IPAK (TO-251) type A package information
4.7
IPAK (TO-251) type A package information
Figure 29. IPAK (TO-251) type A package outline
0068771_IK_typeA_rev14
DS2834 - Rev 6
page 22/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
IPAK (TO-251) type A package information
Table 15. IPAK (TO-251) type A package mechanical data
Dim.
mm
Min.
Typ.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
DS2834 - Rev 6
Max.
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
1.00
page 23/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
IPAK (TO-251) type C package information
4.8
IPAK (TO-251) type C package information
Figure 30. IPAK (TO-251) type C package outline
0068771_IK_typeC_rev14
DS2834 - Rev 6
page 24/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
IPAK (TO-251) type C package information
Table 16. IPAK (TO-251) type C package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.35
A1
0.90
1.00
1.10
b
0.66
0.79
b2
DS2834 - Rev 6
0.90
b4
5.23
5.33
5.43
c
0.46
0.59
c2
0.46
0.59
D
6.00
6.10
6.20
D1
5.20
5.37
5.55
E
6.50
6.60
6.70
E1
4.60
4.78
4.95
e
2.20
2.25
2.30
e1
4.40
4.50
4.60
H
16.18
16.48
16.78
L
9.00
9.30
9.60
L1
0.80
1.00
1.20
L2
0.90
1.08
1.25
θ1
3°
5°
7°
θ2
1°
3°
5°
page 25/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Ordering information
5
Ordering information
Table 17. Order codes
Order code
DS2834 - Rev 6
Marking
Package
Packing
STB5NK50Z-1
B5NK50Z
I2PAK
Tube
STD5NK50ZT4
D5NK50Z
DPAK
Tape and reel
STP5NK50Z
P5NK50Z
TO-220
Tube
STP5NK50ZFP
P5NK50ZFP
TO-220FP
Tube
STU5NK50Z
5NK50Z
IPAK
Tube
page 26/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Revision history
Table 18. Document revision history
Date
Version
Changes
16-Jun-2004
4
D2PAK Included. New Stylesheet.
06-Sep-2005
5
Inserted Ecopack indication
The part number STB5NK50Z has been moved to a separate datasheet.
18-Sep-2018
6
Added part number STU5NK50Z.
Updated Section 4 Package information.
DS2834 - Rev 6
page 27/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5
4.1
I²PAK package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.5
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.6
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.7
IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.8
IPAK (TO-251) type C package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
DS2834 - Rev 6
page 28/29
STB5NK50Z-1,STD5NK50ZT4,STP5NK50Z,STP5NK50ZFP,STU5NK50Z
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS2834 - Rev 6
page 29/29