STP7NM60N

STD7NM60N, STF7NM60N, STU7NM60N Datasheet N-channel 600 V, 0.8 Ω typ., 5 A MDmesh™ II Power MOSFETs in DPAK, TO-220FP and IPAK packages Features Order code VDS RDS(on) max. ID STD7NM60N STF7NM60N DPAK 600 V STU7NM60N D(2, TAB) • • • G(1) Package 0.9 Ω 5A TO-220FP IPAK 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Applications • Switching applications S(3) AM01475v1_noZen Description These devices are N-channel Power MOSFETs developed using the second generation of MDmesh™ technology. These revolutionary Power MOSFETs associate a vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. They are therefore suitable for the most demanding high-efficiency converters. Product status link STD7NM60N STF7NM60N STU7NM60N DS6523 - Rev 5 - September 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD7NM60N, STF7NM60N, STU7NM60N Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Value Parameter DPAK, IPAK TO-220FP Unit VDS Drain-source voltage 600 V VGS Gate-source voltage ±25 V ID Drain current (continuous) at TC = 25 °C ID Drain current (continuous) at TC = 100 °C IDM (2) 5 5 (1) A 3 (1) A Drain current (pulsed) 20 PTOT Total dissipation at TC = 25 °C 45 VISO Insulation withstand voltage (RMS) from all three leads to external heat-sink (t = 1 s, TC = 25 °C) dv/dt (3) Tj Peak diode recovery voltage slope Operating junction temperature range Tstg Storage temperature range 3 20 (1) A 20 W 2.5 kV 15 V/ns -55 to 150 °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 5 A, di/dt ≤ 100 A/μs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS. Table 2. Thermal data Symbol Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb (1) Thermal resistance junction-pcb Value Unit DPAK TO-220FP IPAK 2.78 6.25 2.78 °C/W 62.5 100 °C/W 50 °C/W 1. When mounted on 1inch² FR-4 board, 2 oz Cu. Table 3. Avalanche characteristics Symbol Parameter IAS(1) Avalanche current, repetitive or not-repetitive EAS(2) Single pulse avalanche energy Value Unit 2 A 119 mJ 1. Pulse width limited by Tj max. 2. Starting Tj = 25 °C, ID = IAS, VDD = 50 V. DS6523 - Rev 5 page 2/26 STD7NM60N, STF7NM60N, STU7NM60N Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage Test conditions Min. ID = 1 mA, VGS = 0 V Typ. 600 Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 2.5 A VGS = 0 V, VDS = 600 V, TC = 125 °C 1 µA 100 µA 100 nA 3 4 V 0.8 0.9 Ω Typ. Max. Unit - pF (1) 2 Unit V VGS = 0 V, VDS = 600 V IDSS Max. 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Test conditions Min. 363 VDS = 50 V, f = 1 MHz, VGS = 0 V - 24.6 1.1 Coss eq. (1) Equivalent capacitance time related VDS = 0 to 480 V, VGS = 0 V - 130 - pF RG Intrinsic gate resistance f = 1 MHz open drain - 5.4 - Ω Qg Total gate charge Qgs Gate-source charge - nC Qgd Gate-drain charge VDD = 480 V, ID = 5 A, VGS = 0 to 10 V (see Figure 14. Test circuit for gate charge behavior) 14 - 2.7 7.7 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) tr td(off) tf DS6523 - Rev 5 Parameter Test conditions Turn-on delay time VDD = 300 V, ID = 2.5 A, Rise time RG = 4.7 Ω, VGS = 10 V Turn-off delay time (see Figure 13. Test circuit for resistive load switching times and Figure 18. Switching time waveform) Fall time Min. Typ. Max. Unit - ns 7 - 10 26 12 page 3/26 STD7NM60N, STF7NM60N, STU7NM60N Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions ISD Source-drain current ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 5 A, VGS = 0 V trr Reverse recovery time ISD = 5 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V (see Figure 15. Test circuit for inductive load switching and diode recovery times) trr Reverse recovery time ISD = 5 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V, Tj = 150 °C(see Figure 15. Test circuit for inductive load switching and diode recovery times) Min. Typ. Max. Unit 5 - 20 - - - 1.3 A V 213 ns 1.5 μC 14 A 265 ns 1.8 μC 14 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. DS6523 - Rev 5 page 4/26 STD7NM60N, STF7NM60N, STU7NM60N Electrical characteristics curves 2.1 Electrical characteristics curves Figure 1. Safe operating area for DPAK and IPAK ID Figure 2. Thermal impedance for DPAK and IPAK ) 10µs D S( on O Li p e r m at ite io d ni by n m th is ax a R re a is AM06474v1 0 100µs 1ms Tj=150°C Tc=25°C -1 10ms S ingle puls -2 -1 0 2 DS Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP AM06475v1 ID K GC20940 on ) 10µs D S( O Li p e r m at ite io d ni by n m th is ax a R re a is 101 100 10 -1 100µs 1ms 10ms 10 -2 Tj=150°C Tc=25°C 10-1 S ingle puls e 10-2 10-1 100 101 102 10 -3 10 -4 DS Figure 5. Output characterisics AM06477v1 ID (A) 9 VGS =10V 10 -2 10 -1 10 0 t p (s) Figure 6. Transfer characteristics AM06478v1 ID 9 6V 8 10 -3 VDS =20V 8 7 7 6 6 5 5 4 4 5V 3 3 2 2 1 1 0 0 0 DS6523 - Rev 5 10 20 40 VDS (V) 0 4 8 VGS (V) page 5/26 STD7NM60N, STF7NM60N, STU7NM60N Electrical characteristics curves Figure 7. Gate charge vs gate-source voltage AM06479v1 VGS (V) VDD=480V ID=5A 12 VDS (V) 500 VDS 10 AM06480v1 R DS (on) (Ohm ) VGS =10V 0.88 0.86 400 8 300 6 200 4 0.84 0.82 0.80 0.78 100 2 0 Figure 8. Static drain-source on-resistance 0 2 6 4 8 10 12 0 14 16 Q g (nC) Figure 9. Capacitance variations 0.76 0.74 2 1 0 3 4 5 ID(A) Figure 10. Normalized gate threshold voltage vs temperature AM06483v1 VGS (th) (norm) 1.10 ID=250µA 103 1.00 102 0.90 101 100 10-1 0.80 101 100 0.70 -50 102 Figure 11. Normalized on-resistance vs temperature AM06484v1 R DS (on) (norm) 50 75 100 TJ (°C) AM06485v1 V(BR)DSS ID=1mA 1.05 1.7 1.03 1.5 1.01 1.3 0.99 1.1 0.9 0.97 0.7 0.95 DS6523 - Rev 5 25 Figure 12. Normalized V(BR)DSS vs temperature 1.07 1.9 0.5 -50 -25 0 (norm) ID=2.5A 2.1 -25 0 25 50 75 100 TJ (°C) 0.93 -50 -25 0 25 50 75 100 TJ (°C) page 6/26 STD7NM60N, STF7NM60N, STU7NM60N Test circuits 3 Test circuits Figure 13. Test circuit for resistive load switching times Figure 14. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 15. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 16. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 18. Switching time waveform Figure 17. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS6523 - Rev 5 page 7/26 STD7NM60N, STF7NM60N, STU7NM60N Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS6523 - Rev 5 page 8/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type A package information 4.1 DPAK (TO-252) type A package information Figure 19. DPAK (TO-252) type A package outline 0068772_A_25 DS6523 - Rev 5 page 9/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type A package information Table 8. DPAK (TO-252) type A mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS6523 - Rev 5 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 10/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type C package information 4.2 DPAK (TO-252) type C package information Figure 20. DPAK (TO-252) type C package outline 0068772_C_25 DS6523 - Rev 5 page 11/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type C package information Table 9. DPAK (TO-252) type C mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.25 E 6.50 E1 4.70 e 5.46 6.10 6.20 6.60 6.70 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 2.90 REF 0.90 L3 L4 1.25 0.51 BSC 0.60 L6 DS6523 - Rev 5 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 12/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type E package information 4.3 DPAK (TO-252) type E package information Figure 21. DPAK (TO-252) type E package outline 0068772_type-E_rev.25 DS6523 - Rev 5 page 13/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) type E package information Table 10. DPAK (TO-252) type E mechanical data Dim. A mm Min. Typ. Max. 2.18 2.39 A2 0.13 b 0.65 0.884 b4 4.95 5.46 c 0.46 0.61 c2 0.46 0.60 D 5.97 6.22 D1 5.21 E 6.35 E1 4.32 6.73 e 2.286 e1 4.572 H 9.94 10.34 L 1.50 1.78 L1 L2 2.74 0.89 L4 1.27 1.02 Figure 22. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS6523 - Rev 5 page 14/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) packing information 4.4 DPAK (TO-252) packing information Figure 23. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS6523 - Rev 5 page 15/26 STD7NM60N, STF7NM60N, STU7NM60N DPAK (TO-252) packing information Figure 24. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 11. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS6523 - Rev 5 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 16/26 STD7NM60N, STF7NM60N, STU7NM60N TO-220FP package information 4.5 TO-220FP package information Figure 25. TO-220FP package outline 7012510_Rev_12_B DS6523 - Rev 5 page 17/26 STD7NM60N, STF7NM60N, STU7NM60N TO-220FP package information Table 12. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS6523 - Rev 5 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 18/26 STD7NM60N, STF7NM60N, STU7NM60N IPAK (TO-251) type A package information 4.6 IPAK (TO-251) type A package information Figure 26. IPAK (TO-251) type A package outline 0068771_IK_typeA_rev14 DS6523 - Rev 5 page 19/26 STD7NM60N, STF7NM60N, STU7NM60N IPAK (TO-251) type A package information Table 13. IPAK (TO-251) type A package mechanical data Dim. mm Min. Typ. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H DS6523 - Rev 5 Max. 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10° 1.00 page 20/26 STD7NM60N, STF7NM60N, STU7NM60N IPAK (TO-251) type C package information 4.7 IPAK (TO-251) type C package information Figure 27. IPAK (TO-251) type C package outline 0068771_IK_typeC_rev14 DS6523 - Rev 5 page 21/26 STD7NM60N, STF7NM60N, STU7NM60N IPAK (TO-251) type C package information Table 14. IPAK (TO-251) type C package mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.35 A1 0.90 1.00 1.10 b 0.66 0.79 b2 DS6523 - Rev 5 0.90 b4 5.23 5.33 5.43 c 0.46 0.59 c2 0.46 0.59 D 6.00 6.10 6.20 D1 5.20 5.37 5.55 E 6.50 6.60 6.70 E1 4.60 4.78 4.95 e 2.20 2.25 2.30 e1 4.40 4.50 4.60 H 16.18 16.48 16.78 L 9.00 9.30 9.60 L1 0.80 1.00 1.20 L2 0.90 1.08 1.25 θ1 3° 5° 7° θ2 1° 3° 5° page 22/26 STD7NM60N, STF7NM60N, STU7NM60N Ordering information 5 Ordering information Table 15. Order codes Order code Marking STD7NM60N STF7NM60N STU7NM60N DS6523 - Rev 5 7NM60N Package Packing DPAK Tape and reel TO-220FP IPAK Tube page 23/26 STD7NM60N, STF7NM60N, STU7NM60N Revision history Table 16. Document revision history Date Version 29-Oct-2009 1 First release. 19-Jul-2010 2 Corrected values in Table 3: Thermal data. 11-Oct-2010 3 Inserted new value in Table 6: Dynamic 04-Nov-2010 Changes Changed RDS(on) typical value. The part number STP7NM60N has been moved to a separate datasheet. Removed maturity status indication from cover page. The document status is production data. 05-Sep-2018 Updated title and features in cover page. Updated Section 1 Electrical ratings, Section 2 Electrical characteristics and Section 4 Package information. Minor text changes. DS6523 - Rev 5 page 24/26 STD7NM60N, STF7NM60N, STU7NM60N Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 4.1 DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.2 DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.3 DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.4 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.6 IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 4.7 IPAK (TO-251) type C package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 DS6523 - Rev 5 page 25/26 STD7NM60N, STF7NM60N, STU7NM60N IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS6523 - Rev 5 page 26/26