XTHI12W860

Part Number: XTHI12W860 T-1 3/4 (5mm) INFRARED EMITTING DIODE Features Package Schematics ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) THI/860 (GaAlAs) Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 80 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 1000 mA mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number XTHI12W860 Emitting Material GaAlAs Operating Characteristics (TA=25°C) Water Clear Unit Forward Voltage (Typ.) (IF=20mA) VF 1.35 V Forward Voltage (Max.) (IF=20mA) VF 1.6 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 860* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 50 nm C 30 pF Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 860* 20° Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color THI/860 (GaAlAs) Radiant Intensity CIE127-2007* (Po=mW/sr) @20mA Radiant Intensity CIE127-2007* (Po=mW/sr) @50mA min. typ. min. typ. 18* 39* 55* 98* *Radiant intensity value and wavelength are in accordance with CIE127-2007 standards. Jan 03,2014 XDSA7689 V5-Z Layout: Maggie L. P. 1/3 Part Number: XTHI12W860 T-1 3/4 (5mm) INFRARED EMITTING DIODE  THI/860 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity / Luminous Flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jan 03,2014 XDSA7689 V5-Z Layout: Maggie L. P. 2/3 Part Number: XTHI12W860 T-1 3/4 (5mm) INFRARED EMITTING DIODE PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Jan  03,2014 XDSA7689 V5-Z Layout: Maggie L. P. 3/3