50-00045

1 4 3 2 9.5 6 ±0.05 SECTION A-A 3.6 +0. 0 10 2.5 ±0.20 A 1 ±0.03 1.3 1 1 2.3 A 7 ±0.10 13 ±0.10 16.5 ±0.50 Revision: Date: Description: A 10/19/2009 Initial release A1 12/08/2011 Updated measurements A2 03/14/2013 Updated spec format A3 01/23/2018 Changed insulator material 5 Prepared: JW Verified: GL Digitally signed by JW Date: 2019.06.10 16:08:59 -07'00' Digitally signed by GL Date: 2019.06.10 16:12:00 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm 0.3 mm X.X: X.XX: 0.05 mm 4 Notes: RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc jack, 3.5x1.1xL16.5 mm, molding style 3 Size: Part number: A 50-00045 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 2:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com Materials 1. Shell, C3604 brass, 2 μm nickel plated 2. Spring contact, BeCu, 2 μm nickel plated 3. Pin, C3604 brass, 2 μm nickel plated 4. Insulator, PBT + 15% GF, black  Electrical requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 30 mΩ or less  Mechanical requirements Insertion force: 0.3-2.5 kgf Withdrawal force: 0.3-2.5 kgf Durability: 5000 mating cycles while maintaining; min 0.3 kgf insertion force, min 0.2 kgf withdrawal force and less than 100 mΩ contact resistance.  Environmental requirements Damp test: 40 °C, RH 90-100% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain dielectric strength of 500 Vac for 1 min, insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less.  Dry test: 70 °C, RH 70-85% for 96 hrs. Cool to ambient and recover for 2 hours. Maintain insulation resistance of 50 MΩ @ 500 Vdc minimum and a contact resistance of 100 mΩ or less.  Salt spray test: 35 °C, RH 90-95%, 5% NaCl mist for 24 hrs. Wash parts after test. Maintain mechanical requirements and a contact resistance of less than 80 mΩ.  Ratings Maximum Operating Voltage: 48 Vdc Maximum Operating Current: 3.5 A Operating Temperature Range -25° to 70 °, relative humidity of 85% or less Testing based on IEC 60512-5-2. Max current curve generated with isolated test article under controlled environmental conditions, and does not take into account external factors such as housings,mating cables, or other circuitry. Operating current curve (derated by 20% of maximum values) accounts for external factors, and manufacturing variation. Revision: Date: Description: A 10/19/2009 Initial release A1 12/08/2011 Updated measurements A2 03/14/2013 Updated spec format A3 01/23/2018 Changed insulator material 5 Prepared: JW Verified: GL Digitally signed by JW Date: 2019.06.10 16:09:23 -07'00' Digitally signed by GL Date: 2019.06.10 16:12:17 -07'00' Dimensions are in millimeters. Tolerances: X: 0.3 mm X.X: 0.1 mm X.XX: 0.05 mm 4 Notes: RoHS compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, dc jack, 3.5x1.1xL16.5 mm, molding style 3 Size: Part number: A 50-00045 Scale: 2 1.541.323.3228 1.541.323.4202 800 web 877.670.7118 tensility.com 2:1 Sheet 2 of 2 1