MKP1848H55050KK2

MKP1848H DC-Link www.vishay.com Vishay Roederstein THB Metallized Polypropylene DC-Link Film Capacitor 85 °C / 85 % RH 1000 h at UNDC - Vishay Automotive Grade FEATURES • High robustness under high humidity • THB 85 °C, 85 % RH, 1000 h at rated UNDC • AEC-Q200 qualified, revision D at Tmax. = 85 °C (Tmax. = 105 °C available on request) • High ripple current capability, low ESR, low ESL • Mounting: radial • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Ideal for out-of-doors applications or in other harsh environments • Renewable energies inverters • UPS • Battery chargers • Motor drives LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models QUICK REFERENCE DATA Rated capacitance range Capacitance tolerance Climatic testing class Rated temperature Maximum permissible case temperature Maximum applicable peak to peak ripple voltage Reference standards Dielectric Electrodes Construction Encapsulation Terminals Self inductance (LS) Withstanding DC voltage between terminals (1) Insulation resistance 1 μF to 80 μF ± 5 %, ± 10 % 40 / 085 / 56 85 °C 105 °C, observing voltage derating 0.2 x UNDC IEC 61071, IEC 60068 Polypropylene film Metallized dielectric capacitor Mono construction Plastic case sealed with resin; flame retardant UL 94 V-0 Tinned wire < 1 nH per mm of lead spacing 1.5 UNDC for 10 s, cut off current 10 mA, rise time ≤ 1000 V/s RC between leads, after 1 min > 10 000 s, measuring voltage: 500 V Useful life time: > 100 000 h at UNDC and 70 °C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC, 40 °C Life time expectancy (2) Manufacturer’s name; C-value; tolerance; rated voltage; manufacturer’s type designation; code for dielectric material, manufacturer location, year and week Marking Notes • For more detailed data and test requirements, contact dc-film@vishay.com • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Film Capacitors” (www.vishay.com/doc?28169) (2) Statements about life time results from calculations which are based on internal tests. They have to be understood exclusively as estimations. Also due to external factors, the life time in the field application may deviate from the calculated life time DC VOLTAGE RATINGS UNDC at 85 °C UOPDC at 70 °C UOPDC at 105 °C Revision: 20-Feb-2023 500 V 600 V 350 V 700 V 800 V 450 V 800 V 960 V 560 V 920 V 1100 V 650 V 1200 V 1440 V 850 V Document Number: 26078 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) Example: 10 4 100 5 510 1000 nF 1 μF P1 (mm) PITCH CODE 1000 6 610 10 000 nF 10 μF 27.5 K 100 μF 37.5 P 52.5 Y 10 000 7 MKP 1848H 6 710 12 100 000 nF 90 J P 4 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE SPECIAL CODE FOR TERMINAL TOLERANCE 2 2 pins UNDC = 50 = 500 VDC J ±5% 4 4 pins P2 = 10.2 mm UNDC = 70 = 700 VDC K ± 10 % 5 4 pins P2 = 20.3 mm (1) Customized VOLTAGE UNDC = 80 = 800 VDC UNDC = 90 = 920 VDC UNDC = 12 = 1200 VDC Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm Ø dt 4 PINS w I Marking P2 P2 h P1 6-2 Ø dt P1 ± 0.5 P2 ± 0.5 Note • Ø dt ± 10 % of standard diameter specified Revision: 20-Feb-2023 Document Number: 26078 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. 85 °C (μF) (V) DIMENSION (5) (mm) w h P1 (mm) P2 (mm) du/dt IPEAK (V/μs) (A) l ESR (3) tan δ (4) 10 kHz 10 kHz < (x 10-4) (mΩ) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS IRMS (2) (A) ORDERING CODE (1) UOPDC AT 70 °C = 600 V; UOPDC AT 105 °C = 350 V 500 5 15.0 25.0 32.0 27.5 - 40 200 7.0 - 10.1 - 65 - MKP1848H55050+K2 6 15.0 25.0 32.0 27.5 - 40 240 7.6 - 8.6 - 65 - MKP1848H56050+K2 7 18.0 28.0 32.0 27.5 - 40 280 8.8 - 7.6 - 65 - MKP1848H57050+K2 8 18.0 28.0 32.0 27.5 - 40 320 9.3 - 6.8 - 65 - MKP1848H58050+K2 10 21.0 31.0 32.0 27.5 - 40 400 11.0 - 5.7 - 65 - MKP1848H61050+K2 12 21.0 31.0 32.0 27.5 - 40 480 11.7 - 5.0 - 65 - MKP1848H61250+K2 15 22.0 38.0 32.0 27.5 - 40 600 13.9 - 4.3 - 65 - MKP1848H61550+K2 20 21.5 38.5 42.0 37.5 10.2 20 400 13.6 14.4 5.3 4.8 145 130 MKP1848H62050+P* 22 21.5 38.5 42.0 37.5 10.2 20 440 14.1 14.8 5.0 4.5 145 130 MKP1848H62250+P* 25 21.5 38.5 42.0 37.5 10.2 20 500 14.7 15.5 4.6 4.1 145 130 MKP1848H62550+P* 30 30.0 45.0 42.0 37.5 10.2 / 20.3 20 600 18.1 19.1 4.1 3.7 145 130 MKP1848H63050+P* 35 30.0 45.0 42.0 37.5 10.2 / 20.3 20 700 18.9 19.9 3.8 3.4 145 130 MKP1848H63550+P* 40 30.0 45.0 42.0 37.5 10.2 / 20.3 20 800 19.6 20.7 3.5 3.2 145 130 MKP1848H64050+P* 45 30.0 45.0 42.0 37.5 10.2 / 20.3 20 900 20.2 21.3 3.3 3.0 145 130 MKP1848H64550+P* 50 30.0 45.0 57.5 52.5 20.3 10 500 20.9 22.0 3.9 3.5 250 225 MKP1848H65050+Y* 55 30.0 45.0 57.5 52.5 20.3 10 550 21.2 22.3 3.8 3.4 250 225 MKP1848H65550+Y* 60 30.0 45.0 57.5 52.5 20.3 10 600 21.4 22.5 3.7 3.3 250 225 MKP1848H66050+Y* 65 30.0 45.0 57.5 52.5 20.3 10 650 21.6 22.7 3.6 3.3 250 225 MKP1848H66550+Y* 70 35.0 50.0 57.5 52.5 20.3 10 700 23.5 24.8 3.6 3.2 250 225 MKP1848H67050+Y* 75 35.0 50.0 57.5 52.5 20.3 10 750 23.6 24.9 3.5 3.2 250 225 MKP1848H67550+Y* 80 35.0 50.0 57.5 52.5 20.3 10 800 23.8 25.1 3.5 3.2 250 225 MKP1848H68050+Y* UOPDC AT 70 °C = 800 V; UOPDC AT 105 °C = 450 V 700 4 15.0 25.0 32.0 27.5 - 50 200 7.0 - 10.0 - 55 - MKP1848H54070+K2 5 18.0 28.0 32.0 27.5 - 50 250 8.4 - 8.2 - 55 - MKP1848H55070+K2 6 18.0 28.0 32.0 27.5 - 50 300 9.1 - 7.0 - 55 - MKP1848H56070+K2 7 21.0 31.0 32.0 27.5 - 50 350 10.6 - 6.2 - 55 - MKP1848H57070+K2 8 21.0 31.0 32.0 27.5 - 50 400 11.1 - 5.6 - 55 - MKP1848H58070+K2 10 22.0 38.0 32.0 27.5 - 50 500 13.3 - 4.7 - 55 - MKP1848H61070+K2 12 22.0 38.0 32.0 27.5 - 50 600 14.2 - 4.1 - 55 - MKP1848H61270+K2 15 21.5 38.5 42.0 37.5 10.2 25 375 14.6 15.3 4.7 4.2 100 90 MKP1848H61570+P* 20 21.5 38.5 42.0 37.5 10.2 25 500 15.6 16.5 4.0 3.6 100 90 MKP1848H62070+P* 22 30.0 45.0 42.0 37.5 10.2 / 20.3 25 550 18.7 19.7 3.9 3.5 100 90 MKP1848H62270+P* 25 30.0 45.0 42.0 37.5 10.2 / 20.3 25 625 19.2 20.2 3.7 3.3 100 90 MKP1848H62570+P* 30 30.0 45.0 42.0 37.5 10.2 / 20.3 25 750 19.9 21.0 3.4 3.1 100 90 MKP1848H63070+P* 35 30.0 45.0 57.5 52.5 20.3 12 420 19.7 20.8 4.3 3.9 215 195 MKP1848H63570+Y* 40 30.0 45.0 57.5 52.5 20.3 12 480 20.1 21.2 4.2 3.8 215 195 MKP1848H64070+Y* 45 30.0 45.0 57.5 52.5 20.3 12 540 20.5 21.6 4.0 3.6 215 195 MKP1848H64570+Y* 50 35.0 50.0 57.5 52.5 20.3 12 600 22.4 23.6 3.9 3.5 215 195 MKP1848H65070+Y* 55 35.0 50.0 57.5 52.5 20.3 12 660 22.7 23.9 3.9 3.5 215 195 MKP1848H65570+Y* 60 35.0 50.0 57.5 52.5 20.3 12 720 22.9 24.1 3.8 3.4 215 195 MKP1848H66070+Y* Revision: 20-Feb-2023 Document Number: 26078 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. 85 °C (μF) (V) 800 920 1200 DIMENSION (5) (mm) P1 (mm) w h l 3 4 5 6 7 8 10 12 15 20 22 25 30 35 40 45 50 15.0 18.0 21.0 21.0 21.0 22.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 28.0 31.0 31.0 31.0 38.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 2 3 4 5 6 7 8 10 12 15 20 22 25 30 35 40 15.0 18.0 18.0 21.0 22.0 22.0 22.0 21.5 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 28.0 31.0 38.0 38.0 38.0 38.5 45.0 45.0 45.0 45.0 45.0 45.0 50.0 50.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 1 2 3 4 5 6 7 8 10 12 15 20 22 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 ESR (3) tan δ (4) 10 kHz 10 kHz P2 du/dt IPEAK < (x 10-4) (mΩ) (V/μs) (A) (mm) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UOPDC AT 70 °C = 960 V; UOPDC AT 105 °C = 560 V 60 180 6.3 12.3 50 60 240 7.7 9.8 50 60 300 9.1 8.4 50 60 360 9.7 7.4 50 60 420 10.1 6.7 50 60 480 11.6 6.2 50 60 600 12.3 5.4 50 10.2 30 360 11.8 12.5 7.1 6.4 100 90 10.2 30 450 12.8 13.5 6.1 5.5 100 90 10.2 / 20.3 30 600 16.3 17.2 5.1 4.6 100 90 10.2 / 20.3 30 660 16.8 17.7 4.8 4.3 100 90 10.2 / 20.3 30 750 17.4 18.3 4.5 4.0 100 90 20.3 15 450 17.4 18.3 5.6 5.0 210 190 20.3 15 525 18.3 19.3 5.0 4.5 210 190 20.3 15 600 20.7 21.8 4.6 4.2 210 190 20.3 15 675 21.5 22.7 4.3 3.9 210 190 20.3 15 750 22.2 23.4 4.0 3.6 210 190 UOPDC AT 70 °C = 1100 V; UOPDC AT 105 °C = 650 V 65 130 5.7 15.2 40 65 195 7.4 10.8 40 65 260 8.3 8.5 40 65 325 9.8 7.2 40 65 390 11.5 6.3 40 65 455 12.1 5.6 40 65 520 12.6 5.2 40 10.2 35 350 11.8 12.4 7.2 6.4 90 80 10.2 / 20.3 35 420 14.6 15.4 6.3 5.7 90 80 10.2 / 20.3 35 525 15.7 16.5 5.5 4.9 90 80 10.2 / 20.3 35 700 17.0 18.0 4.7 4.2 90 80 20.3 18 396 16.3 17.2 6.4 5.7 150 135 20.3 18 450 17.2 18.2 5.7 5.1 150 135 20.3 18 540 18.5 19.5 4.9 4.4 150 135 20.3 18 630 21.2 22.4 4.4 3.9 150 135 20.3 18 720 22.3 23.5 4.0 3.6 150 135 UOPDC AT 70 °C = 1440 V; UOPDC AT 105 °C = 850 V 85 85 4.5 24.8 35 85 170 6.5 13.7 35 85 255 8.3 10.0 35 85 340 10.0 8.2 35 10.2 40 200 9.8 10.4 10.3 9.2 55 50 10.2 40 240 10.7 11.2 8.7 7.8 55 50 10.2 / 20.3 40 280 13.3 14.0 7.6 6.9 55 50 10.2 / 20.3 40 320 14.1 14.9 6.8 6.1 55 50 10.2 / 20.3 40 400 15.5 16.3 5.6 5.1 55 50 20.3 20 240 13.8 14.6 8.9 8.0 120 105 20.3 20 300 15.2 16.0 7.3 6.6 120 105 20.3 20 400 18.5 19.5 5.8 5.2 120 105 20.3 20 440 19.2 20.2 5.4 4.8 120 105 IRMS (2) (A) ORDERING CODE (1) MKP1848H53080+K2 MKP1848H54080+K2 MKP1848H55080+K2 MKP1848H56080+K2 MKP1848H57080+K2 MKP1848H58080+K2 MKP1848H61080+K2 MKP1848H61280+P* MKP1848H61580+P* MKP1848H62080+P* MKP1848H62280+P* MKP1848H62580+P* MKP1848H63080+Y* MKP1848H63580+Y* MKP1848H64080+Y* MKP1848H64580+Y* MKP1848H65080+Y* MKP1848H52090+K2 MKP1848H53090+K2 MKP1848H54090+K2 MKP1848H55090+K2 MKP1848H56090+K2 MKP1848H57090+K2 MKP1848H58090+K2 MKP1848H61090+P* MKP1848H61290+P* MKP1848H61590+P* MKP1848H62090+P* MKP1848H62290+Y* MKP1848H62590+Y* MKP1848H63090+Y* MKP1848H63590+Y* MKP1848H64090+Y* MKP1848H51012+K2 MKP1848H52012+K2 MKP1848H53012+K2 MKP1848H54012+K2 MKP1848H55012+P* MKP1848H56012+P* MKP1848H57012+P* MKP1848H58012+P* MKP1848H61012+P* MKP1848H61212+Y* MKP1848H61512+Y* MKP1848H62012+Y* MKP1848H62212+Y* Notes (1) Change the “*” symbol with special code for the terminals and “+” for tolerance (2) Maximum RMS current at 10 kHz, +85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, a typical ESR value at 10 kHz (3) Equivalent series resistance typical values at 10 kHz (4) Maximum tan δ values at 10 kHz (5) Standard dimensions, for maximum dimension please consult “Dimensions Tolerances” Revision: 20-Feb-2023 Document Number: 26078 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) CAP. (1) (μF) DIMENSION (mm) w h l Ø dt (mm) ORDERING CODE (2) MASS (g) SPQ (3) (pcs) UOPDC AT 70 °C = 600 V; UOPDC AT 105 °C = 350 V 500 5 15.0 25.0 32.0 0.8 MKP1848H55050+K2 14.5 100 6 15.0 25.0 32.0 0.8 MKP1848H56050+K2 14.5 100 7 18.0 28.0 32.0 0.8 MKP1848H57050+K2 20.5 80 8 18.0 28.0 32.0 0.8 MKP1848H58050+K2 20.5 80 10 21.0 31.0 32.0 0.8 MKP1848H61050+K2 27.5 56 12 21.0 31.0 32.0 0.8 MKP1848H61250+K2 27 56 15 22.0 38.0 32.0 0.8 MKP1848H61550+K2 34 56 20 21.5 38.5 42.0 1.0 MKP1848H62050+P* 42.5 91 22 21.5 38.5 42.0 1.0 MKP1848H62250+P* 42 91 25 21.5 38.5 42.0 1.0 MKP1848H62550+P* 41 91 30 30.0 45.0 42.0 1.0 MKP1848H63050+P* 70.5 63 35 30.0 45.0 42.0 1.0 MKP1848H63550+P* 73 63 40 30.0 45.0 42.0 1.0 MKP1848H64050+P* 70.5 63 45 30.0 45.0 42.0 1.0 MKP1848H64550+P* 69.5 63 50 30.0 45.0 57.5 1.2 MKP1848H65050+Y* 95.5 45 55 30.0 45.0 57.5 1.2 MKP1848H65550+Y* 94 45 60 30.0 45.0 57.5 1.2 MKP1848H66050+Y* 91.5 45 65 30.0 45.0 57.5 1.2 MKP1848H66550+Y* 89.5 45 70 35.0 50.0 57.5 1.2 MKP1848H67050+Y* 127 40 75 35.0 50.0 57.5 1.2 MKP1848H67550+Y* 124.5 40 80 35.0 50.0 57.5 1.2 MKP1848H68050+Y* 120.5 40 4 15.0 25.0 32.0 0.8 MKP1848H54070+K2 14.5 100 5 18.0 28.0 32.0 0.8 MKP1848H55070+K2 20.5 80 6 18.0 28.0 32.0 0.8 MKP1848H56070+K2 20 80 7 21.0 31.0 32.0 0.8 MKP1848H57070+K2 27 56 UOPDC AT 70 °C = 800 V; UOPDC AT 105 °C = 450 V 700 8 21.0 31.0 32.0 0.8 MKP1848H58070+K2 26.5 56 10 22.0 38.0 32.0 0.8 MKP1848H61070+K2 33.5 56 12 22.0 38.0 32.0 0.8 MKP1848H61270+K2 33.5 56 15 21.5 38.5 42.0 1.0 MKP1848H61570+P* 42 91 20 21.5 38.5 42.0 1.0 MKP1848H62070+P* 39 91 22 30.0 45.0 42.0 1.0 MKP1848H62270+P* 71 63 25 30.0 45.0 42.0 1.0 MKP1848H62570+P* 69 63 30 30.0 45.0 42.0 1.0 MKP1848H63070+P* 70 63 35 30.0 45.0 57.5 1.2 MKP1848H63570+Y* 91.5 45 40 30.0 45.0 57.5 1.2 MKP1848H64070+Y* 93.5 45 45 30.0 45.0 57.5 1.2 MKP1848H64570+Y* 90 45 50 35.0 50.0 57.5 1.2 MKP1848H65070+Y* 119 40 55 35.0 50.0 57.5 1.2 MKP1848H65570+Y* 123 40 60 35.0 50.0 57.5 1.2 MKP1848H66070+Y* 120 40 Revision: 20-Feb-2023 Document Number: 26078 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) 800 920 1200 CAP. (1) (μF) DIMENSION (mm) w h 3 4 5 6 7 8 10 12 15 20 22 25 30 35 40 45 50 15.0 18.0 21.0 21.0 21.0 22.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 25.0 28.0 31.0 31.0 31.0 38.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 2 3 4 5 6 7 8 10 12 15 20 22 25 30 35 40 15.0 18.0 18.0 21.0 22.0 22.0 22.0 21.5 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 28.0 31.0 38.0 38.0 38.0 38.5 45.0 45.0 45.0 45.0 45.0 45.0 50.0 50.0 1 2 3 4 5 6 7 8 10 12 15 20 22 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 Ø dt (mm) ORDERING CODE (2) l UOPDC AT 70 °C = 960 V; UOPDC AT 105 °C = 560 V 32.0 0.8 MKP1848H53080+K2 32.0 0.8 MKP1848H54080+K2 32.0 0.8 MKP1848H55080+K2 32.0 0.8 MKP1848H56080+K2 32.0 0.8 MKP1848H57080+K2 32.0 0.8 MKP1848H58080+K2 32.0 0.8 MKP1848H61080+K2 42.0 1.0 MKP1848H61280+P* 42.0 1.0 MKP1848H61580+P* 42.0 1.0 MKP1848H62080+P* 42.0 1.0 MKP1848H62280+P* 42.0 1.0 MKP1848H62580+P* 57.5 1.2 MKP1848H63080+Y* 57.5 1.2 MKP1848H63580+Y* 57.5 1.2 MKP1848H64080+Y* 57.5 1.2 MKP1848H64580+Y* 57.5 1.2 MKP1848H65080+Y* UOPDC AT 70 °C = 1100 V; UOPDC AT 105 °C = 650 V 32.0 0.8 MKP1848H52090+K2 32.0 0.8 MKP1848H53090+K2 32.0 0.8 MKP1848H54090+K2 32.0 0.8 MKP1848H55090+K2 32.0 0.8 MKP1848H56090+K2 32.0 0.8 MKP1848H57090+K2 32.0 0.8 MKP1848H58090+K2 42.0 1.0 MKP1848H61090+P* 42.0 1.0 MKP1848H61290+P* 42.0 1.0 MKP1848H61590+P* 42.0 1.0 MKP1848H62090+P* 57.5 1.2 MKP1848H62290+Y* 57.5 1.2 MKP1848H62590+Y* 57.5 1.2 MKP1848H63090+Y* 57.5 1.2 MKP1848H63590+Y* 57.5 1.2 MKP1848H64090+Y* UOPDC AT 70 °C = 1440 V; UOPDC AT 105 °C = 850 V 32.0 0.8 MKP1848H51012+K2 32.0 0.8 MKP1848H52012+K2 32.0 0.8 MKP1848H53012+K2 32.0 0.8 MKP1848H54012+K2 42.0 1.0 MKP1848H55012+P* 42.0 1.0 MKP1848H56012+P* 42.0 1.0 MKP1848H57012+P* 42.0 1.0 MKP1848H58012+P* 42.0 1.0 MKP1848H61012+P* 57.5 1.2 MKP1848H61212+Y* 57.5 1.2 MKP1848H61512+Y* 57.5 1.2 MKP1848H62012+Y* 57.5 1.2 MKP1848H62212+Y* MASS (g) SPQ (3) (pcs) 14.5 20.5 26.5 27 26.5 33 33 42 40.5 69 71 69.5 89 91.5 119 124 119.5 100 80 56 56 56 56 56 91 91 63 63 63 45 45 40 40 40 15 20.5 20 27 34.5 34 33.5 42 77 74 69.5 98 94 89.5 124 119.5 100 80 80 56 56 56 56 91 63 63 63 45 45 45 40 40 15 20 26.5 33.5 42.5 41 76 74.5 70.5 97.5 92.5 122.5 119.5 100 80 56 56 91 91 63 63 63 45 45 40 40 Notes (1) Intermediate capacitance values available on request (2) Change the “*” symbol with special code for the terminals, and “+” for tolerance (3) SPQ = Standard Packing Quantity Revision: 20-Feb-2023 Document Number: 26078 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. DIMENSIONS TOLERANCES For the maximum product dimensions for length (lmax.), width (wmax.), and height (hmax.) use the following tolerances: lmax. = l + Δl, wmax. = w + Δw, and hmax. = h + Δh Pitch = 27.5 mm, Δw = Δl = Δh = 0.7 mm Pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm Pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh Pitch = 27.5 mm, Δw = Δl = Δh = 1.0 mm Pitch = 37.5 mm, Δw = Δl = Δh = 1.0 mm Pitch = 52.5 mm, Δw = Δl = Δh = 1.5 mm SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD For product height with seating plane as given by “IEC 60717” as reference. For 2 pins: The maximum space for length (lmax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. • For products with pitch ≤ 27.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. The maximum length and width of film capacitors is shown in the figure. wmax. = w + Δw Eccentricity Imax. = I + ΔI hmax. = h + Δh Seating plane For 4 pins: P1 ØD P2 Wmax. Lmax. Revision: 20-Feb-2023 Document Number: 26078 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein P1 (mm) Lmax. (mm) Wmax. (mm) Ø D (mm) Δh (mm) 37.5 l + 1.5 w + 1.8 1.5 h + 0.7 52.5 l + 1.8 w + 2.0 1.7 h + 0.7 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Conditions Vishay Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa, and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. CHARACTERISTICS Axis Title Axis Title 4 100 000 10000 10000 3 2 1000 -2 1st line 2nd line -1 2nd line RC (s) 1000 0 1st line 2nd line 2nd line ΔC/C (%) 1 10 000 100 -3 100 -4 -5 10 -6 -60 -40 -20 0 20 40 60 10 1000 80 100 120 0 20 40 60 80 100 120 Tamb (°C) Tamb (°C) Capacitance as a function of ambient temperature (typical) Insulation resistance as a function of ambient temperature (typical) Axis Title Axis Title 10000 1.3 10000 1 000 000 Pitch = 27.5 mm 100 000 70 °C 1 μF 1000 85 °C 0.9 0.8 100 2nd line Z (mΩ) 1.0 3 μF 10 000 1st line 2nd line 2nd line UOPDC / UNDC (V) 1.1 1000 5 μF 1st line 2nd line 1.2 1000 10 μF 100 100 15 μF 0.7 105 °C 10 0.6 0.5 1000 10 000 100 000 10 1 000 000 1 1 10 100 1000 10 10 000 Lifetime Expectancy (h) f (kHz) Lifetime expectancy by case temperature (typical) Impedance as a function of frequency (typical) Revision: 20-Feb-2023 Document Number: 26078 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein Axis Title Axis Title 10000 100 000 10 000 10000 Pitch = 37.5 mm Pitch = 52.5 mm 10 000 1000 5 μF 30 μF 80 μF 1 100 1000 10 10 000 1 1 10 1000 10 10 000 f (kHz) Impedance as a function of frequency (typical) Impedance as a function of frequency (typical) Axis Title Axis Title 100 10000 10000 50 μF 1000 1st line 2nd line 45 μF 15 μF 50 μF 80 μF 5 μF 20 μF 1000 1st line 2nd line 20 μF 2nd line ESR (mΩ) 80 μF 2nd line IRMS (A) 100 f (kHz) 100 10 100 10 10 10 65 μF 100 25 μF 1 100 1st line 2nd line 45 μF 1000 50 μF 2nd line Z (mΩ) 1000 100 35 μF 1000 1st line 2nd line 2nd line Z (mΩ) 12 μF 10 100 5 μF 100 45 μF 15 μF 10 1 1 10 10 1 1 100 10 100 f (kHz) f (kHz) Maximum IRMS current as function of frequency (500 VDC), based TA + 85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, (typical curve) ESR as function of frequency (500 VDC) (typical curve) Axis Title Axis Title 100 10000 1000 12 μF 1000 60 μF 4 μF 10 1st line 2nd line 35 μF 2nd line ESR (mΩ) 10 10000 30 μF 15 μF 1st line 2nd line 2nd line IRMS (A) 60 μF 100 15 μF 12 μF 100 4 μF 100 30 μF 35 μF 10 1 1 10 100 10 1 1 10 100 f (kHz) f (kHz) Maximum IRMS current as function of frequency (700 VDC), based TA + 85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, (typical curve) ESR as function of frequency (700 VDC) (typical curve) Revision: 20-Feb-2023 Document Number: 26078 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein Axis Title Axis Title 100 100 10000 10000 30 μF 3 μF 12 μF 1000 50 μF 30 μF 12 μF 10 10 μF 100 10 μF 3 μF 2nd line ESR (mΩ) 10 1st line 2nd line 2nd line IRMS (A) 1000 25 μF 1st line 2nd line 50 μF 100 25 μF 10 1 1 10 10 1 1 100 10 100 f (kHz) f (kHz) Maximum IRMS current as function of frequency (800 VDC), based TA + 85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, (typical curve) ESR as function of frequency (800 VDC) (typical curve) Axis Title Axis Title 100 100 10000 10000 40 μF 2 μF 10 μF 40 μF 10 μF 8 μF 20 μF 10 1 1 22 μF 10 100 2 μF 10 1000 1st line 2nd line 10 2nd line ESR (mΩ) 22 μF 1000 1st line 2nd line 2nd line IRMS (A) 20 μF 100 8 μF 10 1 1 100 10 100 f (kHz) f (kHz) Maximum IRMS current as function of frequency (920 VDC), based TA + 85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, (typical curve) ESR as function of frequency (920 VDC) (typical curve) Axis Title Axis Title 100 100 10000 10000 1 μF 1000 10 5 μF 4 μF 1000 4 μF 5 μF 10 10 μF 22 μF 100 10 1 10 100 100 12 μF 1 μF 1 1st line 2nd line 12 μF 2nd line ESR (mΩ) 2nd line IRMS (A) 22 μF 1st line 2nd line 10 μF 10 1 1 10 100 f (kHz) f (kHz) Maximum IRMS current as function of frequency (1200 VDC), based TA + 85 °C, Δt = +15 °C, capacitance tolerance ± 5 %, (typical curve) ESR as function of frequency (1200 VDC) (typical curve) Revision: 20-Feb-2023 Document Number: 26078 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein Axis Title Axis Title 10000 1.6 1.4 30 1.2 25 0.6 100 1000 1st line 2nd line 0.8 2nd line ΔT 1000 1.0 1st line 2nd line 2nd line IRMS Operational / IRMS max. 10000 35 20 15 100 10 0.4 5 0.2 10 0 45 65 85 105 10 0 45 125 65 85 105 125 Maximum Ambient Temperature (°C) Maximum Ambient Temperature (°C) Maximum IRMS current in function of the ambient temperature Maximum allowed component temperature rise (ΔT) as a function of ambient temperature (Tamb) HEAT CONDUCTIVITY w 15.0 18.0 21.0 22.0 21.5 30.0 30.0 35.0 DIMENSIONS (mm) h 25.0 28.0 31.0 38.0 38.5 45.0 45.0 50.0 HEAT CONDUCTIVITY (mW/°C) l 32.0 32.0 32.0 32.0 42.0 42.0 57.5 57.5 33 39 46 55 66 90 113 132 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification www.vishay.com/doc?28147 The component temperature rise (ΔT) can be measured (see section “Measuring the Component Temperature” for more details) or calculated by ΔT = P/G: • ΔT = TC - Tamb = case temperature rise (°C) with a maximum of 15 °C at rated temperature • P = IRMS2 x ESR = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded condition (Tamb) and loaded condition (TC). The temperature rise is given by ΔT = TC - Tamb To avoid external thermal radiation or convection, the capacitor must be tested in a closed area, free from air circulation. Revision: 20-Feb-2023 Document Number: 26078 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein APPLICATION NOTES AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The continuous peak voltage (UP+) shall not exceed the DC voltage rating (UNDC) 2. The peak-to-peak ripple voltage (UPP) shall not be greater than 0.2 x (UNDC) Voltage (V) Non reversing recurrent waveform Up+, UNDC Up- t 3. For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com 4. The voltage peak slope (du/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T du 2 du 2 x   ------ x dt < U NDC x  ------  dt   dt  rated 0 T is the pulse duration MAXIMUM REPETITIVE PEAK VOLTAGES REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x UNDC 30 % on load duration 1.15 x UNDC 30 min 1.2 x UNDC 5 min 1.3 x UNDC 1 min 1.5 x UNDC 110 ms Note • The capacitor unit may be subjected to the surge above without any significant reduction of lifetime expectancy Revision: 20-Feb-2023 Document Number: 26078 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein TEST CONDITIONS AND REQUIREMENTS ACCORDING IEC 61071 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2-1 External inspection, visual examination Legible marking as specified 5.14.2-2 Dimensions See specification drawing 5.3-1 Capacitance 1 kHz at room temperature See specific reference data 5.3-2 tan δ 10 kHz at room temperature See specific reference data 5.5.1-2 DC voltage test between terminals 1.5 x UNDC at Tamb Duration: 10 s No visible damage or puncture No flashover 5.7 Insulation resistance Measuring voltage 500 V at room temperature Duration: 1 min See specific reference data Legible marking and finish as specified Dimensions: see specific drawing TYPE TESTS 5.14.2 External inspection Check for finish, marking, and overall dimensions 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.1-1/4 Robustness of terminations IEC 60068-2-21 Tensile Ua1: duration: 10 s ± 1 s Wire diameter Section Load d ≤ 0.80 mm S ≤ 0.5 mm2 10 N (± 10 %) d ≤ 1.25 mm S ≤ 1.2 mm2 20 N (± 10 %) Bending, Ub method 1: 4 x 90 °, duration 2 s to 3 s/bend Wire diameter Section Load d ≤ 0.80 mm Zx ≤ 0.050 mm3 5 N (± 10 %) d ≤ 1.25 mm Zx ≤ 0.019 mm3 10 N (± 10 %) 5.14.1-6 Resistance to soldering heat IEC 60068-2-20 No predrying, method 1A Solder bath: 280 °C ± 5 °C Duration: 10 s ± 1 s 5.14.4 Final measurements Capacitance tan δ 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.3-1 Vibration IEC 60068-2-6 10 Hz to 55 Hz: amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles (3 axes offset from each other by 90°) 1 octave/min Visual examination 5.14.3-2 Shock or impact IEC 60068-2-6 Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 5.14.4 Final measurements Visual examination Capacitance tan δ Revision: 20-Feb-2023 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 No visible damage No visible damage |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 Document Number: 26078 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein TEST CONDITIONS AND REQUIREMENTS ACCORDING IEC 61071 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.5.3-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.5.3-2 DC voltage test between terminals 1.5 x UNDC at Tamb Duration: 60 s 5.5.3-3 Final measurements Capacitance tan δ Insulation resistance 5.9-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.9-2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9-2 DC voltage test between terminals Within 5 min after the surge discharge test 1.5 x UNDC at Tamb Duration: 60 s 5.9-3 Final measurements Capacitance tan δ Insulation resistance |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 IR ≥ 50 % of specified values |ΔC/C| ≤ 1.0 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.9-1 IR ≥ 50 % of specified values 5.11-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.11-2 Self healing test 1.5 x UNDC Duration: 10 s increase the voltage at 100 V/s till 5 clearings occur or until voltage reach max. of 2.5 x UNDC for a duration of 10 s Number of clearings ≤ 5 Clearing = voltage drop of 5 % 5.11-3 Final measurements Capacitance tan δ |ΔC/C| ≤ 0.5 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.11.1 IR ≥ 50 % of specified values 5.13-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.13-1 Change of temperature acc. to IEC 60068-2-14 Test Nb Tmax. = 85 °C Tmin. = -40 °C Transition time: 1 h, equivalent to 1 °C/min 5 cycles 5.13.2 Damp heat steady state acc. to IEC 60068-2-78 Test Ca T = 40 °C ± 2 °C RH = 93 % ± 3 % Duration: 56 days 5.5.3-2 DC voltage test between terminals 1.5 x UNDC at ambient temperature Duration: 60 s 5.13.3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan δ |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.13-0 IR ≥ 50 % of specified values Insulation resistance Insulation resistance Revision: 20-Feb-2023 Document Number: 26078 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein TEST CONDITIONS AND REQUIREMENTS ACCORDING IEC 61071 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.13A-0 Initial measurements Capacitance at 1 kHz tan δ at 1 kHz Insulation resistance 5.13A.2 Accelerate damp heat steady state with load T = 85 °C RH = 85 % at UNDC Duration 1000 h 5.13.3 Final measurements Capacitance at 1 kHz tan δ at 1 kHz 5.10-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.10-1 Thermal stability test under overload conditions Natural cooling Tamb ± 5 °C 1.21 x Pmax. = 1.21 x (I2RMS/w x C) x tan δ(f) with w = 2 x π x f for IRMS see specific reference data f = 10 kHz Duration: 48 h 5.10-2 Final measurements Measure the temperature every 1.5 h during the last 6 h Capacitance tan δ at 10 kHz Insulation resistance Temperature rise < 1 °C > 0.9 times the value as specified in typical curve “Resonant frequency” of this specification Insulation resistance 5.12 Resonance frequency measurement Impedance analyzer at Tamb 5.15-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.15-1 Endurance test between terminals Sequence 1.3 x UNDC at 85 °C 1.3 x UOPDC at 105 °C Duration: 500 h |ΔC/C| < 10 % Increase of tan δ ≤ 0.0100 Compared to values measured in 5.13A.0 IR ≥ 50 % of specified values |ΔC/C| ≤ 2 % Increase of tan δ ≤ 0.0150 IR ≥ 50 % of specified values 1000 x discharge at 1.4 x Î (maximum peak current) 1.3 x UNDC at 85 °C 1.3 x UOPDC at 105 °C Duration: 500 h 5.15-2 Final measurements Capacitance tan δ Insulation resistance 5.16.3-0 Initial measurements Capacitance at 1 kHz 5.16.3-1 Destruction test sequence for non-segmented film The capacitors must be put in an oven at Tmax. = 85 °C, product enveloped with cheese cloth High DC voltage test 3 x UNDC or DC voltage until repetitive product healings occur, duration: 15 min High AC voltage test ACRMS voltage = UNDC/2 √2 with min. 250 VAC Duration: 5 min |ΔC/C| ≤ 3 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.15-0 IR ≥ 50 % of specified values Audible healings or check healings with oscilloscope Repeat destruction sequence 3 x 5.16.3-2 Final measurements Revision: 20-Feb-2023 Visual examination No puncturing, flashover or burning of the cheese cloth Self healing punctures are permitted Document Number: 26078 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848H DC-Link www.vishay.com Vishay Roederstein TEST CONDITIONS AND REQUIREMENTS ACCORDING AEC-Q200 REVISION D NO. TEST NAME REFERENCE 1 Pre- and post-stress electrical test Spec. 3 High temperature exposure (storage) MIL-STD 202 method 108 TEST CONDITIONS PERFORMANCE REQUIREMENTS - - 85 °C; unpowered 250 h / 500 h / 1000 h |ΔC/C| ≤ 3 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 1000 cycles: -40 °C / +85 °C 30 min. dwell time at each temperature extreme Transition time < 1 min. |ΔC/C| ≤ 2 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 4 Temperature cycling JESD22 method JA-104 6 Moisture resistance MIL-STD 202 method 106 10 cycles at 24 h/cycle unpowered |ΔC/C| ≤ 2 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 7 Biased humidity MIL-STD 202 method 103 40 °C; 93 % RH; URDC 250 h / 500 h / 1000 h |ΔC/C| ≤ 2 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 8 Operational life MIL-STD 202 method 108 Tamb = 85 °C; 1.25 x URDC 250 h / 500 h / 1000 h |ΔC/C| ≤ 3 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 9 External visual MIL-STD 883 method 2009 Device construction, marking, and workmanship Device construction and workmanship; legible marking 10 Physical dimension Spec. Datasheet 11 Terminal strength (leaded) MIL-STD 202 method 211 Test leaded device lead integrity only. - A (pull-test): 44.1 N (10 s) - C (wire-lead bend test): 227 g (3 x 3 s) No visual damage 12 Resistance to solvents MIL-STD 202 method 215 Also aqueous chemical - OKEM clean or equivalent. Do not use banned solvents. No visual damage Legible marking 13 Mechanical shock MIL-STD 202 method 213 100 g's; 6 ms half-sine; 3.75 m/s No visual damage 14 Vibration MIL-STD 202 method 204 5 g's for 20 min; 12 cycles x 3 directions 10 Hz to 2000 Hz No visual damage 15 Resistance to soldering heat MIL-STD 202 method 210 280 °C; 10 s solder within 1.5 mm of device body |ΔC/C| ≤ 0.5 % Increase of tan δ (10 kHz) ≤ 0.005 IR > 50 % of initial specified value 17 ESD 18 Solderability 19 Electrical characterization 20 Flammability JESD22 method JB-100 J-STD-002 UL-94 IEC 60384-1 - - Leaded: method A at 235 °C, category 3 (245 °C / 3 s) Good tinning as evidence by free flowing of the solder with wetting of terminations > 95 % - - One flame application Class B V-0 or V-1 are acceptable. Class B or C acc. IEC is also acceptable Note Measurement conditions at 23 °C: • Capacitance at 1 kHz • tan δ 10 kHz (additional 1 kHz and ESR 10 kHz) • Insulation resistance 500 V, 1 min after full charge • Dimensions w x h x l Revision: 20-Feb-2023 Document Number: 26078 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000