UGB8CT-E3/81

UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor Ultrafast Rectifier FEATURES TO-220AC ITO-220AC • Power pack • Glass passivated pellet chip junction • Ultrafast recovery time • Low switching losses, high efficiency • High forward surge capability 2 1 1 UG8xT UGF8xT PIN 1 PIN 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 2 • Solder dip 275 °C max., 10 s per JESD 22-B106 (for TO-220AC and ITO-220AC package) PIN 1 CASE • AEC-Q101 qualified available PIN 2 D2PAK (TO-263AB) - Automotive ordering code: base P/NHE3 (for ITO-220AC and D2PAK (TO-263AB package)) K • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 2 1 TYPICAL APPLICATIONS UGB8xT PIN 1 For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. K PIN 2 HEATSINK DESIGN SUPPORT TOOLS AVAILABLE MECHANICAL DATA 3D 3D Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB) 3D Models Molding compound meets UL 94V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,....) PRIMARY CHARACTERISTICS IF(AV) 8.0 A VRRM 50 V to 200 V IFSM 150 A trr 20 ns Terminals: matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test VF at IF 0.95 V Polarity: as marked TJ max. 150 °C Mounting Torque: 10 in-lbs max. Package TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configuration Single MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG8AT UG8BT UG8CT UG8DT UNIT Max. repetitive peak reverse voltage VRRM 50 100 150 200 V Max. RMS voltage VRMS 35 70 105 140 V Max. DC blocking voltage VDC 50 100 150 200 V Max. average forward rectified current at TC = 100 °C IF(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A TJ, TSTG -55 to +150 °C VAC 1500 V Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminals to heatsink t = 1 min Revision: 12-Jun-2019 Document Number: 88765 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL UG8AT UG8BT 8.0 A Max. instantaneous forward voltage UG8CT UG8DT UNIT 1.0 TJ = 150 °C 20.0 A VF (1) 1.2 5.0 A V 0.95 TJ = 25 °C Max. DC reverse current at rated DC blocking voltage Max. reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Max. reverse recovery time IF = 8.0 A, VR = 30 V, dI/dt = 50 A/μs,  Irr = 10 % IRM Max. recovered stored charged IF = 8.0 A, VR = 30 V, dI/dt = 50 A/μs Typical junction capacitance 4.0 V, 1 MHz 10 IR TJ = 100 °C μA 300 trr 20 TJ = 25 °C ns 30 trr TJ = 100 °C TJ = 25 °C 20 Qrr TJ = 100 °C ns 50 nC 45 CJ 45 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance from junction to case RJC (1) UG8xT UGF8xT UGB8xT UNIT 4.0 5.0 4.0 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC UG8DT-E3/45 1.80 45 50/tube Tube ITO-220AC UGF8DT-E3/45 1.95 45 50/tube Tube D2PAK (TO-263AB) UGB8DT-E3/45 1.33 45 50/tube Tube D2PAK (TO-263AB) UGB8DT-E3/81 1.33 81 800/reel Tape and reel ITO-220AC UGF8DTHE3_A/P (1) 1.95 P 50/tube Tube (1) 1.33 P 50/tube Tube 1.33 I 800/reel Tape and reel D2PAK (TO-263AB) D2PAK (TO-263AB) PREFERRED P/N UGB8DTHE3_A/P UGB8DTHE3_A/I (1) Note AEC-Q101 qualified, available in ITO-220AC and D2PAK (TO-263AB) package (1) Revision: 12-Jun-2019 Document Number: 88765 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 Resistive or Inductive Load Instantaneous Reverse Leakage Current (µA) Average Forward Rectified Current (A) 12 10 8 6 4 2 100 TJ = 100 °C 10 1 TJ = 25 °C 0.1 0.01 0 0 25 50 75 100 125 150 175 0 20 40 60 80 100 Ambient Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Max. Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 60 1000 TC = 100 °C 8.3 ms Single Half Sine-Wave Recovered Store Charge/Reverse Recovery Time (nC/ns) Peak Forward Surge Current (A) TJ = 125 °C 100 10 IF = 4.0 A VR = 30 V 50 dI/dt = 100 A/µs dI/dt = 150 A/µs 20 A/µs 50 A/µs 40 100 A/µs 50 A/µs 30 150 A/µs 20 20 A/µs 10 trr Qrr 0 1 10 0 100 25 50 75 100 125 150 175 Number of Cycles at 60 Hz Junction Temperature (°C) Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current Fig. 5 - Reverse Switching Characteristics 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 1 0.1 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Junction Capacitance 100 Revision: 12-Jun-2019 Document Number: 88765 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UG8xT, UGF8xT, UGB8xT www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) PIN 1 0.350 (8.89) 0.330 (8.38) 0.603 (15.32) 0.573 (14.55) 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) PIN 1 CASE PIN 2 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) ITO-220AC 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.025 (0.64) 0.015 (0.38) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) D2PAK (TO-263AB) 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) Mounting Pad Layout 0.42 (10.66) min. 0.055 (1.40) 0.045 (1.14) K 0.33 (8.38) min. 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) min. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 12-Jun-2019 Document Number: 88765 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000