V30120S, VF30120S, VB30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
High Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.43 V at IF = 5 A
FEATURES
TMBS ®
TO-220AB
ITO-220AB
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 245 °C (for TO-263AB
package)
2
V30120S
3
1
VF30120S
1
PIN 1
PIN 2
PIN 1
PIN 3
CASE
PIN 3
D2PAK (TO-263AB)
2
3
PIN 2
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TO-262AA
K
TYPICAL APPLICATIONS
K
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters and reverse battery protection.
A
NC
VB30120S
NC
VI30120S
K
HEATSINK
A
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB, ITO-220AB, and
TO-262AA package)
DESIGN SUPPORT TOOLS
1
PIN 1
PIN 2
PIN 3
K
2
3
click logo to get started
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, D2PAK (TO-263AB), and
TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
(for TO-220AB, ITO-220AB and TO-262AA package) and
class 2 whisker test (for TO-263AB package)
Models
Available
PRIMARY CHARACTERISTICS
IF(AV)
30 A
Polarity: as marked
VRRM
120 V
Mounting Torque: 10 in-lbs maximum
IFSM
300 A
VF at IF = 30 A
0.74 V
TJ max.
150 °C
Package
TO-220AB, ITO-220AB,
D2PAK (TO-263AB), TO-262AA
Circuit configuration
Single
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V30120S
VF30120S VB30120S
VI30120S
UNIT
Maximum repetitive peak reverse voltage
VRRM
120
V
Maximum average forward rectified current (fig. 1)
IF(AV)
30
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
IFSM
300
A
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
Operating junction and storage temperature range
VAC
1500
V
TJ, TSTG
-40 to +150
°C
Revision: 18-Jun-2018
Document Number: 89152
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VF30120S, VB30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5 A
IF = 15 A
Instantaneous forward voltage per diode
(1)
TA = 25 °C
IF = 30 A
VF
IF = 5 A
IF = 15 A
TA = 125 °C
IF = 30 A
VR = 90 V
Reverse current per diode (2)
VR = 120 V
TYP.
MAX.
0.50
-
0.70
-
0.99
1.10
0.43
-
0.60
-
0.74
0.82
18
-
μA
12
-
mA
-
500
μA
22
35
mA
TA = 25 °C
TA = 125 °C
IR
TA = 25 °C
UNIT
TA = 125 °C
V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V30120S
VF30120S
VB30120S
VI30120S
UNIT
RJC
1.6
4.0
1.6
1.6
°C/W
Typical thermal resistance per diode
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
V30120S-M3/4W
PREFERRED P/N
1.88
4W
50/tube
Tube
ITO-220AB
VF30120S-M3/4W
1.75
4W
50/tube
Tube
TO-263AB
VB30120S-M3/4W
1.39
4W
50/tube
Tube
TO-263AB
VB30120S-M3/8W
1.39
8W
800/reel
Tape and reel
TO-262AA
VI30120S-M3/4W
1.46
4W
50/tube
Tube
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
30
Resistive or Inductive Load
D = 0.5
35
V(B,I)30120S
Average Power Loss (W)
Average Forward Rectified Current (A)
40
30
25
VF30120S
20
15
10
25
D = 0.3
20
D = 0.2
D = 1.0
15
D = 0.1
T
10
5
5
D = 0.8
D = tp/T
tp
Mounted on Specific Heatsink
0
0
0
25
50
75
100
125
150
175
0
5
10
15
20
25
30
35
Case Temperature (°C)
Average Forward Current (A)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Forward Power Loss Characteristics Per Diode
Revision: 18-Jun-2018
Document Number: 89152
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VF30120S, VB30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
10
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
TA = 25 °C
0.2
0.4
0.6
0.8
1.0
1.2
1
V(B,I)30120S
0.1
0.01
0.1
0
Junction to Case
1.4
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
10
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (mA)
100
TA = 150 °C
10
TA = 125 °C
1
TA = 100 °C
0.1
TA = 25 °C
0.01
0.001
10
20
30
40
50
60
70
80
90
100
Junction to Case
1
VF30120S
0.1
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 7 - Typical Transient Thermal Impedance Per Diode
Junction Capacitance (pF)
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
100
10
0.1
1
10
100
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance Per Diode
Revision: 18-Jun-2018
Document Number: 89152
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VF30120S, VB30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.415 (10.54)
0.380 (9.65)
0.185 (4.70)
0.175 (4.44)
0.161 (4.08)
0.139 (3.53)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
PIN
2
0.635 (16.13)
0.625 (15.87)
3
0.160 (4.06)
0.140 (3.56)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
0.603 (15.32)
0.573 (14.55)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
Revision: 18-Jun-2018
Document Number: 89152
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V30120S, VF30120S, VB30120S, VI30120S
www.vishay.com
Vishay General Semiconductor
TO-262AA
0.411 (10.45)
0.380 (9.65)
0.950 (24.13)
0.920 (23.37)
1
PIN
2 3
0.185 (4.70)
0.175 (4.44)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.401 (10.19)
0.381 (9.68)
0.350 (8.89)
0.330 (8.38)
0.510 (12.95)
0.470 (11.94)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.022 (0.56)
0.014 (0.35)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
NC
K
A
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 18-Jun-2018
Document Number: 89152
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2019
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
V30120S-M3/4W VI30120S-M3/4W VF30120S-M3/4W