VLMY31J2K2-GS08

VLMY31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 948553 • Available in 8 mm tape DESCRIPTION • Low profile package This device has been designed for applications requiring narrow brightness and color selection. • Non-diffused lens: excellent for coupling to light pipes and backlighting The package of this device is the PLCC-2. • Low power consumption It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. • Luminous intensity IVmax./IVmin. ≤ 1.6 ratio in one packaging unit • Preconditioning according to JEDEC® level 2a PRODUCT GROUP AND PACKAGE DATA • ESD withstand voltage: up to 2 kV according to JESD22-A114-B • Product group: LED • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 • Package: SMD PLCC-2 • Product series: standard APPLICATIONS • Angle of half intensity: ± 60° • Telecommunication: telephone and fax indicator and backlighting in • Indicator and backlight for audio and video equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches, and symbols • General use PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) MIN. at IF (mA) TYP. MAX. WAVELENGTH (nm) MIN. FORWARD VOLTAGE (V) at IF (mA) TYP. MAX. MIN. at IF TECHNOLOGY (mA) TYP. MAX. VLMY31J1K2-GS08 Yellow 4.5 7.6 11.2 10 581 588 594 10 - 2.1 2.8 20 GaAsP on GaP VLMY31K1L2-GS08 Yellow 7.1 8.6 18 10 581 588 594 10 - 2.1 2.8 20 GaAsP on GaP Rev. 1.7, 14-Apr-2022 Document Number: 81326 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMY31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMY31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 20 mA tp ≤ 10 μs IFSM 0.34 A PV 56 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature UNIT Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Tsd 260 °C RthJA 400 K/W t≤5s Soldering temperature Thermal resistance junction to ambient Mounted on PC board (pad size > 16 mm2) Note (1) Driving the LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY31.., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX VLMY31J1K2 IV 4.5 7.6 11.2 UNIT mcd VLMY31K1L2 IV 7.1 8.6 18 mcd Luminous intensity IF = 10 mA Dominant wavelength IF = 10 mA λd 581 588 594 nm Peak wavelength IF = 10 mA λp - 590 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - ° Forward voltage IF = 20 mA VF - 2.1 2.8 V IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 15 - pF Reverse voltage Junction capacitance LUMINOUS INTENSITY CLASSIFICATION GROUP J1 COLOR CLASSIFICATION LUMINOUS INTENSITY (mcd) MIN. MAX. 4.5 5.6 DOMINANT WAVELENGTH (nm) GROUP YELLOW MIN. MAX. J2 5.6 7.1 1 581 584 K1 7.10 9.00 2 583 586 K2 9.00 11.20 3 585 588 L1 11.20 14.00 4 587 590 L2 14.00 18.00 5 589 592 6 591 594 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, singe wavelength groups will not be orderable Rev. 1.7, 14-Apr-2022 Note • Wavelengths are tested at a current pulse duration of 25 ms CROSSING TABLE VISHAY OSRAM VLMY31J1K2 LYT670-J1K2 VLMY31K1L2 LYT670-K1L2 Document Number: 81326 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMY31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title Axis Title 30 1.0 10000 10000 Yellow 1000 10 100 0.7 1000 0.6 1st line 2nd line 20 2nd line IVrel - Relative Intensity 0.8 1st line 2nd line 2nd line IF - Forward Current (mA) 0.9 0.5 0.4 100 0.3 0.2 0.1 0 0 20 40 60 80 10 0 10 520 540 560 580 600 620 640 660 680 700 720 100 Tamb - Ambient Temperature (°C) 2nd line λ - Wavelengths (nm) 2nd line Fig. 1 - Forward Current vs. Ambient Temperature Fig. 4 - Relative Luminous Intensity vs. Wavelength Axis Title Axis Title 0.02 1000 1st line 2nd line 0.05 100 100 0.1 10 1 0.01 0.2 0.5 DC 10 0.1 1 Yellow 10 100 1 100 10 1.0 1.5 2.0 2.5 3.0 3.5 tp - Pulse Length (ms) 2nd line VF - Forward Voltage (V) 2nd line Fig. 2 - Forward Current vs. Pulse Length Fig. 5 - Forward Current vs. Forward Voltage 10° Axis Title 20° 100 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 2nd line IV rel - Relative Luminous Intensity 30° 10000 Yellow 10 1000 1st line 2nd line 0° IV rel - Relative Luminous Intensity 10 1000 1st line 2nd line 0.01 2nd line IF - Forward Current (mA) tp/T = 0.005 1000 10000 100 ϕ - Angular Displacement 2nd line IF - Forward Current (mA) 10000 1 100 0.1 0.01 0.6 0.4 0.2 0 95 10319 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.7, 14-Apr-2022 10 1 10 100 IF - Forward Current (mA) 2nd line Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 81326 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMY31.. www.vishay.com Vishay Semiconductors Axis Title Axis Title 100 0.5 0 -20 0 20 40 60 80 1.05 1000 1.00 100 0.95 0.90 10 -40 Yellow 1st line 2nd line 1000 2nd line VF,rel - Relative Forward Voltage (V) 1.5 1st line 2nd line 2nd line IVrel - Relative Luminous Intensity Yellow 1.0 10000 1.10 10000 2.0 100 10 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2nd line Tamb - Ambient Temperature (°C) 2nd line Fig. 7 - Relative Luminous Intensity vs. Ambient Temperature Fig. 8 - Relative Forward Voltage vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 technical drawings according to DIN specifications C A 2.2 2.8 ± 0.15 Pin identification Drawing-No.: 6.541-5067.01-4 Issue: 7; 12.03.14 Ø 2.4 3 + 0.15 Area covered with solderresist 4 2.6 (2.8) Recommended Footprint Mounting Pad Layout 1.2 1.6 (1.9) Rev. 1.7, 14-Apr-2022 4 Document Number: 81326 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMY31.. www.vishay.com Vishay Semiconductors METHOD OD TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3-SERIES) SOLDERING PROFILE Adhesive tape IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 300 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Temperature (°C) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 Blister tape 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885-3 Fig. 11 - Vishay Lead (Pb)-free Reflow Soldering Profile (according to J-STD-020) Component cavity 94 8670 TTW Soldering (according to CECC00802) 300 TAPING OF VLM.3... Lead temperature 2.2 2.0 5.75 5.25 3.6 3.4 4.0 3.6 8.3 7.7 2nd line Temperature (°C) 250 4.1 3.9 1000 ca. 2 K/s ca. 200 K/s 150 Full line: typical Dotted lines: process limits Second wave 100 °C to 130 °C 100 100 2 K/s 1.85 1.65 1.6 1.4 200 235 °C to 260 °C First wave 1st line 2nd line 3.5 3.1 10000 5s 50 ca. 5 K/s Forced cooling 0.25 4.1 3.9 10 0 2.05 1.95 0 94 8668 Fig. 9 - Tape Dimensions in mm for PLCC-2 948626-1 50 100 150 200 250 Time (s) Fig. 12 - Double Wave Soldering of Opto Devices (all Packages) REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 10.0 9.0 120° 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity 180 178 14.4 max. 94 8665 Fig. 10 - Reel Dimensions - GS08 Rev. 1.7, 14-Apr-2022 Document Number: 81326 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMY31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL RECOMMENDED METHOD OF STORAGE A N B C D Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. E F G H I K L M A. 2D barcode After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: B. Part No: Vishay part number 192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air / nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. C. QTY: quantity D. SelCode: selection bin code E. Country of origin F. PTC: production plant code An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. G. Termination finish H. Region code I. Serial#: serial number K. Batch Number: year, week, country code, plant code L E V E L CAUTION L. SL: storage location This bag contains MOISTURE –SENSITIVE DEVICES M. Environmental Symbols: RoHS, lead (Pb)-free, halogen free N. Lot numbers DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag 2a 1. Shelf life in sealed bag 12 months at