GP10D

GP10A THRU GP10M 1.0 AMP. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=75oC and 55oC with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension DO-41 Mechanical Data Case: JEDEC DO-41 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.012 ounce, 0.3 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% GP Symbol GP Type Number 10A 10B Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length (See Fig. 1) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=75℃ Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range GP 10D GP 10G GP 10J GP 10K GP 10M Units V V V A A VRRM VRMS VDC I(AV) IFSM VF IR HTIR Cj RθJA 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 600 420 600 800 1000 560 700 800 1000 1.1 5.0 50 30 10 65 - 65 to + 175 1.2 V uA uA uA pF ℃/W ℃ TJ,TSTG Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. - 566 - RATINGS AND CHARACTERISTIC CURVES (GP10A THRU GP10M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1.0 30 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 0.8 25 Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method 20 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5m/m) LEAD LENGTH 15 0.2 10 0 0 20 40 60 80 100 120 o 5 140 160 180 1 10 NUMBER OF CYCLES AT 60Hz 100 AMBIENT TEMPERATURE. ( C) 10 FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS P1 0J FIG.4- TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT. (A) GP 1 GP K 10 -G P1 0M INSTANTANEOUS REVERSE CURRENT. ( A) A 10 -G Tj=125 0C 1 Tj=75 0C 0.1 0.1 0.01 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0 Tj=25 0C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.001 0 20 40 60 80 100 120 140 FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 20 JUNCTION CAPACITANCE.(pF) 10 8 6 4 Tj=25 0C f=1.0MHz Vsig=50mVp-p 2 1 0.1 0.4 1 4 10 40 100 REVERSE VOLTAGE. (V) - 567 -